Commit 70fe3d98 authored by Cyril Bur's avatar Cyril Bur Committed by Michael Ellerman

powerpc: Restore FPU/VEC/VSX if previously used

Currently the FPU, VEC and VSX facilities are lazily loaded. This is not
a problem unless a process is using these facilities.

Modern versions of GCC are very good at automatically vectorising code,
new and modernised workloads make use of floating point and vector
facilities, even the kernel makes use of vectorised memcpy.

All this combined greatly increases the cost of a syscall since the
kernel uses the facilities sometimes even in syscall fast-path making it
increasingly common for a thread to take an *_unavailable exception soon
after a syscall, not to mention potentially taking all three.

The obvious overcompensation to this problem is to simply always load
all the facilities on every exit to userspace. Loading up all FPU, VEC
and VSX registers every time can be expensive and if a workload does
avoid using them, it should not be forced to incur this penalty.

An 8bit counter is used to detect if the registers have been used in the
past and the registers are always loaded until the value wraps to back
to zero.

Several versions of the assembly in entry_64.S were tested:

  1. Always calling C.
  2. Performing a common case check and then calling C.
  3. A complex check in asm.

After some benchmarking it was determined that avoiding C in the common
case is a performance benefit (option 2). The full check in asm (option
3) greatly complicated that codepath for a negligible performance gain
and the trade-off was deemed not worth it.
Signed-off-by: default avatarCyril Bur <cyrilbur@gmail.com>
[mpe: Move load_vec in the struct to fill an existing hole, reword change log]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>

fixup
parent d272f667
......@@ -236,7 +236,9 @@ struct thread_struct {
#endif
struct arch_hw_breakpoint hw_brk; /* info on the hardware breakpoint */
unsigned long trap_nr; /* last trap # on this thread */
u8 load_fp;
#ifdef CONFIG_ALTIVEC
u8 load_vec;
struct thread_vr_state vr_state;
struct thread_vr_state *vr_save_area;
unsigned long vrsave;
......
......@@ -95,12 +95,14 @@ int main(void)
DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fp_state));
DEFINE(THREAD_FPSAVEAREA, offsetof(struct thread_struct, fp_save_area));
DEFINE(FPSTATE_FPSCR, offsetof(struct thread_fp_state, fpscr));
DEFINE(THREAD_LOAD_FP, offsetof(struct thread_struct, load_fp));
#ifdef CONFIG_ALTIVEC
DEFINE(THREAD_VRSTATE, offsetof(struct thread_struct, vr_state));
DEFINE(THREAD_VRSAVEAREA, offsetof(struct thread_struct, vr_save_area));
DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave));
DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
DEFINE(VRSTATE_VSCR, offsetof(struct thread_vr_state, vscr));
DEFINE(THREAD_LOAD_VEC, offsetof(struct thread_struct, load_vec));
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_VSX
DEFINE(THREAD_USED_VSR, offsetof(struct thread_struct, used_vsr));
......
......@@ -210,7 +210,20 @@ system_call: /* label this so stack traces look sane */
li r11,-MAX_ERRNO
andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- syscall_exit_work
cmpld r3,r11
andi. r0,r8,MSR_FP
beq 2f
#ifdef CONFIG_ALTIVEC
andis. r0,r8,MSR_VEC@h
bne 3f
#endif
2: addi r3,r1,STACK_FRAME_OVERHEAD
bl restore_math
ld r8,_MSR(r1)
ld r3,RESULT(r1)
li r11,-MAX_ERRNO
3: cmpld r3,r11
ld r5,_CCR(r1)
bge- syscall_error
.Lsyscall_error_cont:
......@@ -602,8 +615,8 @@ _GLOBAL(ret_from_except_lite)
/* Check current_thread_info()->flags */
andi. r0,r4,_TIF_USER_WORK_MASK
#ifdef CONFIG_PPC_BOOK3E
bne 1f
#ifdef CONFIG_PPC_BOOK3E
/*
* Check to see if the dbcr0 register is set up to debug.
* Use the internal debug mode bit to do this.
......@@ -618,7 +631,9 @@ _GLOBAL(ret_from_except_lite)
mtspr SPRN_DBSR,r10
b restore
#else
beq restore
addi r3,r1,STACK_FRAME_OVERHEAD
bl restore_math
b restore
#endif
1: andi. r0,r4,_TIF_NEED_RESCHED
beq 2f
......
......@@ -130,6 +130,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
or r12,r12,r4
std r12,_MSR(r1)
#endif
/* Don't care if r4 overflows, this is desired behaviour */
lbz r4,THREAD_LOAD_FP(r5)
addi r4,r4,1
stb r4,THREAD_LOAD_FP(r5)
addi r10,r5,THREAD_FPSTATE
lfd fr0,FPSTATE_FPSCR(r10)
MTFSF_L(fr0)
......
......@@ -187,9 +187,22 @@ void enable_kernel_fp(void)
}
}
EXPORT_SYMBOL(enable_kernel_fp);
static int restore_fp(struct task_struct *tsk) {
if (tsk->thread.load_fp) {
load_fp_state(&current->thread.fp_state);
current->thread.load_fp++;
return 1;
}
return 0;
}
#else
static int restore_fp(struct task_struct *tsk) { return 0; }
#endif /* CONFIG_PPC_FPU */
#ifdef CONFIG_ALTIVEC
#define loadvec(thr) ((thr).load_vec)
void giveup_altivec(struct task_struct *tsk)
{
check_if_tm_restore_required(tsk);
......@@ -229,6 +242,21 @@ void flush_altivec_to_thread(struct task_struct *tsk)
}
}
EXPORT_SYMBOL_GPL(flush_altivec_to_thread);
static int restore_altivec(struct task_struct *tsk)
{
if (cpu_has_feature(CPU_FTR_ALTIVEC) && tsk->thread.load_vec) {
load_vr_state(&tsk->thread.vr_state);
tsk->thread.used_vr = 1;
tsk->thread.load_vec++;
return 1;
}
return 0;
}
#else
#define loadvec(thr) 0
static inline int restore_altivec(struct task_struct *tsk) { return 0; }
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_VSX
......@@ -275,6 +303,18 @@ void flush_vsx_to_thread(struct task_struct *tsk)
}
}
EXPORT_SYMBOL_GPL(flush_vsx_to_thread);
static int restore_vsx(struct task_struct *tsk)
{
if (cpu_has_feature(CPU_FTR_VSX)) {
tsk->thread.used_vsr = 1;
return 1;
}
return 0;
}
#else
static inline int restore_vsx(struct task_struct *tsk) { return 0; }
#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
......@@ -374,6 +414,36 @@ void giveup_all(struct task_struct *tsk)
}
EXPORT_SYMBOL(giveup_all);
void restore_math(struct pt_regs *regs)
{
unsigned long msr;
if (!current->thread.load_fp && !loadvec(current->thread))
return;
msr = regs->msr;
msr_check_and_set(msr_all_available);
/*
* Only reload if the bit is not set in the user MSR, the bit BEING set
* indicates that the registers are hot
*/
if ((!(msr & MSR_FP)) && restore_fp(current))
msr |= MSR_FP | current->thread.fpexc_mode;
if ((!(msr & MSR_VEC)) && restore_altivec(current))
msr |= MSR_VEC;
if ((msr & (MSR_FP | MSR_VEC)) == (MSR_FP | MSR_VEC) &&
restore_vsx(current)) {
msr |= MSR_VSX;
}
msr_check_and_clear(msr_all_available);
regs->msr = msr;
}
void flush_all_to_thread(struct task_struct *tsk)
{
if (tsk->thread.regs) {
......@@ -832,17 +902,9 @@ void restore_tm_state(struct pt_regs *regs)
msr_diff = current->thread.ckpt_regs.msr & ~regs->msr;
msr_diff &= MSR_FP | MSR_VEC | MSR_VSX;
if (msr_diff & MSR_FP) {
msr_check_and_set(MSR_FP);
load_fp_state(&current->thread.fp_state);
msr_check_and_clear(MSR_FP);
regs->msr |= current->thread.fpexc_mode;
}
if (msr_diff & MSR_VEC) {
msr_check_and_set(MSR_VEC);
load_vr_state(&current->thread.vr_state);
msr_check_and_clear(MSR_VEC);
}
restore_math(regs);
regs->msr |= msr_diff;
}
......@@ -1006,6 +1068,10 @@ struct task_struct *__switch_to(struct task_struct *prev,
batch = this_cpu_ptr(&ppc64_tlb_batch);
batch->active = 1;
}
if (current_thread_info()->task->thread.regs)
restore_math(current_thread_info()->task->thread.regs);
#endif /* CONFIG_PPC_BOOK3S_64 */
return last;
......
......@@ -91,6 +91,10 @@ _GLOBAL(load_up_altivec)
oris r12,r12,MSR_VEC@h
std r12,_MSR(r1)
#endif
/* Don't care if r4 overflows, this is desired behaviour */
lbz r4,THREAD_LOAD_VEC(r5)
addi r4,r4,1
stb r4,THREAD_LOAD_VEC(r5)
addi r6,r5,THREAD_VRSTATE
li r4,1
li r10,VRSTATE_VSCR
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment