Commit 719736e1 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Michael Ellerman

powerpc: remove redundant 'default n' from Kconfig-s

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c564 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent b27e5f93
......@@ -286,12 +286,10 @@ config ARCH_MAY_HAVE_PC_FDC
config PPC_UDBG_16550
bool
default n
config GENERIC_TBSYNC
bool
default y if PPC32 && SMP
default n
config AUDIT_ARCH
bool
......@@ -310,13 +308,11 @@ config EPAPR_BOOT
bool
help
Used to allow a board to specify it wants an ePAPR compliant wrapper.
default n
config DEFAULT_UIMAGE
bool
help
Used to allow a board to specify it wants a uImage built by default
default n
config ARCH_HIBERNATION_POSSIBLE
bool
......@@ -330,11 +326,9 @@ config ARCH_SUSPEND_POSSIBLE
config PPC_DCR_NATIVE
bool
default n
config PPC_DCR_MMIO
bool
default n
config PPC_DCR
bool
......@@ -345,7 +339,6 @@ config PPC_OF_PLATFORM_PCI
bool
depends on PCI
depends on PPC64 # not supported on 32 bits yet
default n
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
depends on PPC32 || PPC_BOOK3S_64
......@@ -448,14 +441,12 @@ config PPC_TRANSACTIONAL_MEM
depends on SMP
select ALTIVEC
select VSX
default n
---help---
Support user-mode Transactional Memory on POWERPC.
config LD_HEAD_STUB_CATCH
bool "Reserve 256 bytes to cope with linker stubs in HEAD text" if EXPERT
depends on PPC64
default n
help
Very large kernels can cause linker branch stubs to be generated by
code in head_64.S, which moves the head text sections out of their
......@@ -558,7 +549,6 @@ config RELOCATABLE
config RELOCATABLE_TEST
bool "Test relocatable kernel"
depends on (PPC64 && RELOCATABLE)
default n
help
This runs the relocatable kernel at the address it was initially
loaded at, which tends to be non-zero and therefore test the
......@@ -770,7 +760,6 @@ config PPC_SUBPAGE_PROT
config PPC_COPRO_BASE
bool
default n
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
......@@ -893,7 +882,6 @@ config PPC_INDIRECT_PCI
bool
depends on PCI
default y if 40x || 44x
default n
config EISA
bool
......@@ -990,7 +978,6 @@ source "drivers/pcmcia/Kconfig"
config HAS_RAPIDIO
bool
default n
config RAPIDIO
tristate "RapidIO support"
......@@ -1013,7 +1000,6 @@ endmenu
config NONSTATIC_KERNEL
bool
default n
menu "Advanced setup"
depends on PPC32
......
......@@ -2,7 +2,6 @@
config PPC_DISABLE_WERROR
bool "Don't build arch/powerpc code with -Werror"
default n
help
This option tells the compiler NOT to build the code under
arch/powerpc with the -Werror flag (which means warnings
......@@ -56,7 +55,6 @@ config PPC_EMULATED_STATS
config CODE_PATCHING_SELFTEST
bool "Run self-tests of the code-patching code"
depends on DEBUG_KERNEL
default n
config JUMP_LABEL_FEATURE_CHECKS
bool "Enable use of jump label for cpu/mmu_has_feature()"
......@@ -70,7 +68,6 @@ config JUMP_LABEL_FEATURE_CHECKS
config JUMP_LABEL_FEATURE_CHECK_DEBUG
bool "Do extra check on feature fixup calls"
depends on DEBUG_KERNEL && JUMP_LABEL_FEATURE_CHECKS
default n
help
This tries to catch incorrect usage of cpu_has_feature() and
mmu_has_feature() in the code.
......@@ -80,16 +77,13 @@ config JUMP_LABEL_FEATURE_CHECK_DEBUG
config FTR_FIXUP_SELFTEST
bool "Run self-tests of the feature-fixup code"
depends on DEBUG_KERNEL
default n
config MSI_BITMAP_SELFTEST
bool "Run self-tests of the MSI bitmap code"
depends on DEBUG_KERNEL
default n
config PPC_IRQ_SOFT_MASK_DEBUG
bool "Include extra checks for powerpc irq soft masking"
default n
config XMON
bool "Include xmon kernel debugger"
......
......@@ -2,7 +2,6 @@
config ACADIA
bool "Acadia"
depends on 40x
default n
select PPC40x_SIMPLE
select 405EZ
help
......@@ -11,7 +10,6 @@ config ACADIA
config EP405
bool "EP405/EP405PC"
depends on 40x
default n
select 405GP
select PCI
help
......@@ -20,7 +18,6 @@ config EP405
config HOTFOOT
bool "Hotfoot"
depends on 40x
default n
select PPC40x_SIMPLE
select PCI
help
......@@ -29,7 +26,6 @@ config HOTFOOT
config KILAUEA
bool "Kilauea"
depends on 40x
default n
select 405EX
select PPC40x_SIMPLE
select PPC4xx_PCI_EXPRESS
......@@ -41,7 +37,6 @@ config KILAUEA
config MAKALU
bool "Makalu"
depends on 40x
default n
select 405EX
select PCI
select PPC4xx_PCI_EXPRESS
......@@ -62,7 +57,6 @@ config WALNUT
config XILINX_VIRTEX_GENERIC_BOARD
bool "Generic Xilinx Virtex board"
depends on 40x
default n
select XILINX_VIRTEX_II_PRO
select XILINX_VIRTEX_4_FX
select XILINX_INTC
......@@ -80,7 +74,6 @@ config XILINX_VIRTEX_GENERIC_BOARD
config OBS600
bool "OpenBlockS 600"
depends on 40x
default n
select 405EX
select PPC40x_SIMPLE
help
......@@ -90,7 +83,6 @@ config OBS600
config PPC40x_SIMPLE
bool "Simple PowerPC 40x board support"
depends on 40x
default n
help
This option enables the simple PowerPC 40x platform support.
......@@ -156,7 +148,6 @@ config IBM405_ERR51
config APM8018X
bool "APM8018X"
depends on 40x
default n
select PPC40x_SIMPLE
help
This option enables support for the AppliedMicro APM8018X evaluation
......
......@@ -2,7 +2,6 @@
config PPC_47x
bool "Support for 47x variant"
depends on 44x
default n
select MPIC
help
This option enables support for the 47x family of processors and is
......@@ -11,7 +10,6 @@ config PPC_47x
config BAMBOO
bool "Bamboo"
depends on 44x
default n
select PPC44x_SIMPLE
select 440EP
select PCI
......@@ -21,7 +19,6 @@ config BAMBOO
config BLUESTONE
bool "Bluestone"
depends on 44x
default n
select PPC44x_SIMPLE
select APM821xx
select PCI_MSI
......@@ -44,7 +41,6 @@ config EBONY
config SAM440EP
bool "Sam440ep"
depends on 44x
default n
select 440EP
select PCI
help
......@@ -53,7 +49,6 @@ config SAM440EP
config SEQUOIA
bool "Sequoia"
depends on 44x
default n
select PPC44x_SIMPLE
select 440EPX
help
......@@ -62,7 +57,6 @@ config SEQUOIA
config TAISHAN
bool "Taishan"
depends on 44x
default n
select PPC44x_SIMPLE
select 440GX
select PCI
......@@ -73,7 +67,6 @@ config TAISHAN
config KATMAI
bool "Katmai"
depends on 44x
default n
select PPC44x_SIMPLE
select 440SPe
select PCI
......@@ -86,7 +79,6 @@ config KATMAI
config RAINIER
bool "Rainier"
depends on 44x
default n
select PPC44x_SIMPLE
select 440GRX
select PCI
......@@ -96,7 +88,6 @@ config RAINIER
config WARP
bool "PIKA Warp"
depends on 44x
default n
select 440EP
help
This option enables support for the PIKA Warp(tm) Appliance. The Warp
......@@ -109,7 +100,6 @@ config WARP
config ARCHES
bool "Arches"
depends on 44x
default n
select PPC44x_SIMPLE
select 460EX # Odd since it uses 460GT but the effects are the same
select PCI
......@@ -120,7 +110,6 @@ config ARCHES
config CANYONLANDS
bool "Canyonlands"
depends on 44x
default n
select 460EX
select PCI
select PPC4xx_PCI_EXPRESS
......@@ -134,7 +123,6 @@ config CANYONLANDS
config GLACIER
bool "Glacier"
depends on 44x
default n
select PPC44x_SIMPLE
select 460EX # Odd since it uses 460GT but the effects are the same
select PCI
......@@ -147,7 +135,6 @@ config GLACIER
config REDWOOD
bool "Redwood"
depends on 44x
default n
select PPC44x_SIMPLE
select 460SX
select PCI
......@@ -160,7 +147,6 @@ config REDWOOD
config EIGER
bool "Eiger"
depends on 44x
default n
select PPC44x_SIMPLE
select 460SX
select PCI
......@@ -172,7 +158,6 @@ config EIGER
config YOSEMITE
bool "Yosemite"
depends on 44x
default n
select PPC44x_SIMPLE
select 440EP
select PCI
......@@ -182,7 +167,6 @@ config YOSEMITE
config ISS4xx
bool "ISS 4xx Simulator"
depends on (44x || 40x)
default n
select 405GP if 40x
select 440GP if 44x && !PPC_47x
select PPC_FPU
......@@ -193,7 +177,6 @@ config ISS4xx
config CURRITUCK
bool "IBM Currituck (476fpe) Support"
depends on PPC_47x
default n
select SWIOTLB
select 476FPE
select PPC4xx_PCI_EXPRESS
......@@ -203,7 +186,6 @@ config CURRITUCK
config FSP2
bool "IBM FSP2 (476fpe) Support"
depends on PPC_47x
default n
select 476FPE
select IBM_EMAC_EMAC4 if IBM_EMAC
select IBM_EMAC_RGMII if IBM_EMAC
......@@ -215,7 +197,6 @@ config FSP2
config AKEBONO
bool "IBM Akebono (476gtr) Support"
depends on PPC_47x
default n
select SWIOTLB
select 476FPE
select PPC4xx_PCI_EXPRESS
......@@ -241,7 +222,6 @@ config AKEBONO
config ICON
bool "Icon"
depends on 44x
default n
select PPC44x_SIMPLE
select 440SPe
select PCI
......@@ -252,7 +232,6 @@ config ICON
config XILINX_VIRTEX440_GENERIC_BOARD
bool "Generic Xilinx Virtex 5 FXT board support"
depends on 44x
default n
select XILINX_VIRTEX_5_FXT
select XILINX_INTC
help
......@@ -280,7 +259,6 @@ config XILINX_ML510
config PPC44x_SIMPLE
bool "Simple PowerPC 44x board support"
depends on 44x
default n
help
This option enables the simple PowerPC 44x platform support.
......
......@@ -51,7 +51,6 @@ endif
config PQ2ADS
bool
default n
config 8260
bool
......
......@@ -23,7 +23,6 @@ source "arch/powerpc/platforms/amigaone/Kconfig"
config KVM_GUEST
bool "KVM Guest support"
default n
select EPAPR_PARAVIRT
---help---
This option enables various optimizations for running under the KVM
......@@ -34,7 +33,6 @@ config KVM_GUEST
config EPAPR_PARAVIRT
bool "ePAPR para-virtualization support"
default n
help
Enables ePAPR para-virtualization support for guests.
......@@ -74,7 +72,6 @@ config PPC_DT_CPU_FTRS
config UDBG_RTAS_CONSOLE
bool "RTAS based debug console"
depends on PPC_RTAS
default n
config PPC_SMP_MUXED_IPI
bool
......@@ -86,16 +83,13 @@ config PPC_SMP_MUXED_IPI
config IPIC
bool
default n
config MPIC
bool
default n
config MPIC_TIMER
bool "MPIC Global Timer"
depends on MPIC && FSL_SOC
default n
help
The MPIC global timer is a hardware timer inside the
Freescale PIC complying with OpenPIC standard. When the
......@@ -107,7 +101,6 @@ config MPIC_TIMER
config FSL_MPIC_TIMER_WAKEUP
tristate "Freescale MPIC global timer wakeup driver"
depends on FSL_SOC && MPIC_TIMER && PM
default n
help
The driver provides a way to wake up the system by MPIC
timer.
......@@ -115,43 +108,35 @@ config FSL_MPIC_TIMER_WAKEUP
config PPC_EPAPR_HV_PIC
bool
default n
select EPAPR_PARAVIRT
config MPIC_WEIRD
bool
default n
config MPIC_MSGR
bool "MPIC message register support"
depends on MPIC
default n
help
Enables support for the MPIC message registers. These
registers are used for inter-processor communication.
config PPC_I8259
bool
default n
config U3_DART
bool
depends on PPC64
default n
config PPC_RTAS
bool
default n
config RTAS_ERROR_LOGGING
bool
depends on PPC_RTAS
default n
config PPC_RTAS_DAEMON
bool
depends on PPC_RTAS
default n
config RTAS_PROC
bool "Proc interface to RTAS"
......@@ -164,11 +149,9 @@ config RTAS_FLASH
config MMIO_NVRAM
bool
default n
config MPIC_U3_HT_IRQS
bool
default n
config MPIC_BROKEN_REGREAD
bool
......@@ -187,15 +170,12 @@ config EEH
config PPC_MPC106
bool
default n
config PPC_970_NAP
bool
default n
config PPC_P7_NAP
bool
default n
config PPC_INDIRECT_PIO
bool
......@@ -295,7 +275,6 @@ config CPM2
config FSL_ULI1575
bool
default n
select GENERIC_ISA_DMA
help
Supports for the ULI1575 PCIe south bridge that exists on some
......
# SPDX-License-Identifier: GPL-2.0
config PPC64
bool "64-bit kernel"
default n
select ZLIB_DEFLATE
help
This option selects whether a 32-bit or a 64-bit kernel
......@@ -369,7 +368,6 @@ config PPC_MM_SLICES
bool
default y if PPC_BOOK3S_64
default y if PPC_8xx && HUGETLB_PAGE
default n
config PPC_HAVE_PMU_SUPPORT
bool
......@@ -383,7 +381,6 @@ config PPC_PERF_CTRS
config FORCE_SMP
# Allow platforms to force SMP=y by selecting this
bool
default n
select SMP
config SMP
......@@ -424,7 +421,6 @@ config CHECK_CACHE_COHERENCY
config PPC_DOORBELL
bool
default n
endmenu
......
# SPDX-License-Identifier: GPL-2.0
config PPC_CELL
bool
default n
config PPC_CELL_COMMON
bool
......@@ -22,7 +21,6 @@ config PPC_CELL_NATIVE
select IBM_EMAC_RGMII if IBM_EMAC
select IBM_EMAC_ZMII if IBM_EMAC #test only
select IBM_EMAC_TAH if IBM_EMAC #test only
default n
config PPC_IBM_CELL_BLADE
bool "IBM Cell Blade"
......@@ -54,7 +52,6 @@ config SPU_FS
config SPU_BASE
bool
default n
select PPC_COPRO_BASE
config CBE_RAS
......
......@@ -13,7 +13,6 @@ config PPC_MAPLE
select PPC_RTAS
select MMIO_NVRAM
select ATA_NONSTANDARD if ATA
default n
help
This option enables support for the Maple 970FX Evaluation Board.
For more information, refer to <http://www.970eval.com>
......@@ -2,7 +2,6 @@
config PPC_PASEMI
depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
bool "PA Semi SoC-based platforms"
default n
select MPIC
select PCI
select PPC_UDBG_16550
......
......@@ -30,7 +30,6 @@ config OPAL_PRD
config PPC_MEMTRACE
bool "Enable removal of RAM from kernel mappings for tracing"
depends on PPC_POWERNV && MEMORY_HOTREMOVE
default n
help
Enabling this option allows for the removal of memory (RAM)
from the kernel mappings to be used for hardware tracing.
......
......@@ -49,7 +49,6 @@ config PS3_HTAB_SIZE
config PS3_DYNAMIC_DMA
depends on PPC_PS3
bool "PS3 Platform dynamic DMA page table management"
default n
help
This option will enable kernel support to take advantage of the
per device dynamic DMA page table management provided by the Cell
......@@ -89,7 +88,6 @@ config PS3_SYS_MANAGER
config PS3_REPOSITORY_WRITE
bool "PS3 Repository write support" if PS3_ADVANCED
depends on PPC_PS3
default n
help
Enables support for writing to the PS3 System Repository.
......
......@@ -28,7 +28,6 @@ config PPC_PSERIES
config PPC_SPLPAR
depends on PPC_PSERIES
bool "Support for shared-processor logical partitions"
default n
help
Enabling this option will make the kernel run more efficiently
on logically-partitioned pSeries systems which use shared
......@@ -99,7 +98,6 @@ config PPC_SMLPAR
bool "Support for shared-memory logical partitions"
depends on PPC_PSERIES
select LPARCFG
default n
help
Select this option to enable shared memory partition support.
With this option a system running in an LPAR can be given more
......
......@@ -6,19 +6,16 @@
config PPC4xx_PCI_EXPRESS
bool
depends on PCI && 4xx
default n
config PPC4xx_HSTA_MSI
bool
depends on PCI_MSI
depends on PCI && 4xx
default n
config PPC4xx_MSI
bool
depends on PCI_MSI
depends on PCI && 4xx
default n
config PPC_MSI_BITMAP
bool
......@@ -37,11 +34,9 @@ config PPC_SCOM
config SCOM_DEBUGFS
bool "Expose SCOM controllers via debugfs"
depends on PPC_SCOM && DEBUG_FS
default n
config GE_FPGA
bool
default n
config FSL_CORENET_RCPM
bool
......
# SPDX-License-Identifier: GPL-2.0
config PPC_XIVE
bool
default n
select PPC_SMP_MUXED_IPI
select HARDIRQS_SW_RESEND
config PPC_XIVE_NATIVE
bool
default n
select PPC_XIVE
depends on PPC_POWERNV
config PPC_XIVE_SPAPR
bool
default n
select PPC_XIVE
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment