Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A collection of fixes for ARM platforms.  Most are fixes for DTS
  files, mostly from DT conversion on OMAP which is still finding a few
  issues here and there.

  There's a couple of small stale code removal patches that we usually
  queue for the next release instead, but they seemed harmless enough to
  bring in now.

  Also, a fix for backlight on some PXA platforms, and a cache
  configuration fix for Tegra, etc"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
  MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
  ARM: tegra: only run PL310 init on systems with one
  ARM: tegra: Add head numbers to display controllers
  ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
  ARM: tegra: fix RTC0 alias for Cardhu
  ARM: dove: dt: revert PMU interrupt controller node
  Documentation: dt: OMAP: Update Overo/Tobi
  ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
  ARM: dts: omap3-tobi: Use the correct vendor prefix
  ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
  ARM: OMAP2+: Remove legacy macros for zoom platforms
  ARM: OMAP2+: Remove MACH_NOKIA_N800
  ARM: dts: N900: add missing compatible property
  ARM: dts: N9/N950: fix boot hang with 3.14-rc1
  ARM: OMAP1: nokia770: enable tahvo-usb
  ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
  ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
  ARM: dts: omap3-gta04: Fix mmc1 properties.
  ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
  ARM: OMAP2+: add missing ARCH_HAS_OPP
  ...

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -91,7 +91,7 @@ Boards:
   compatible = "ti,omap3-beagle", "ti,omap3"
 
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
-  compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
 
 - OMAP4 SDP : Software Development Board
   compatible = "ti,omap4-sdp", "ti,omap4430"

MAINTAINERS

@@ -1860,6 +1860,7 @@ F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
 M:	Christian Daudt <bcm@fixthebug.org>
+M:	Matt Porter <mporter@linaro.org>
 L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://git.github.com/broadcom/bcm11351
 S:	Maintained

arch/arm/boot/dts/Makefile

@@ -209,7 +209,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-n900.dtb \
 	omap3-n9.dtb \
 	omap3-n950.dtb \
-	omap3-tobi.dtb \
+	omap3-overo-tobi.dtb \
+	omap3-overo-storm-tobi.dtb \
 	omap3-gta04.dtb \
 	omap3-igep0020.dtb \
 	omap3-igep0030.dtb \

arch/arm/boot/dts/am335x-evmsk.dts

@@ -121,7 +121,7 @@ sound {
 		ti,model = "AM335x-EVMSK";
 		ti,audio-codec = <&tlv320aic3106>;
 		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24576000>;
+		ti,codec-clock-rate = <24000000>;
 		ti,audio-routing =
 			"Headphone Jack",       "HPLOUT",
 			"Headphone Jack",       "HPROUT";
@@ -256,6 +256,12 @@ davinci_mdio_sleep: davinci_mdio_sleep {
 		>;
 	};
 
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
 			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
@@ -456,6 +462,9 @@ &mmc1 {
 	status = "okay";
 	vmmc-supply = <&vmmc_reg>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
 &sham {

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -23,6 +23,7 @@ aliases {
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
+		eth3 = &eth3;
 	};
 
 	cpus {
@@ -291,7 +292,7 @@ gpio2: gpio@18180 {
 				interrupts = <91>;
 			};
 
-			ethernet@34000 {
+			eth3: ethernet@34000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x34000 0x4000>;
 				interrupts = <14>;

arch/arm/boot/dts/dove.dtsi

@@ -379,15 +379,6 @@ gate_clk: clock-gating-ctrl@d0038 {
 				#clock-cells = <1>;
 			};
 
-			pmu_intc: pmu-interrupt-ctrl@d0050 {
-				compatible = "marvell,dove-pmu-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd0050 0x8>;
-				interrupts = <33>;
-				marvell,#interrupts = <7>;
-			};
-
 			pinctrl: pin-ctrl@d0200 {
 				compatible = "marvell,dove-pinctrl";
 				reg = <0xd0200 0x10>;
@@ -610,8 +601,6 @@ gpio1: gpio-ctrl@d0420 {
 			rtc: real-time-clock@d8500 {
 				compatible = "marvell,orion-rtc";
 				reg = <0xd8500 0x20>;
-				interrupt-parent = <&pmu_intc>;
-				interrupts = <5>;
 			};
 
 			gpio2: gpio-ctrl@e8400 {

arch/arm/boot/dts/omap3-gta04.dts

@@ -32,7 +32,7 @@ gpio-keys {
 		aux-button {
 			label = "aux";
 			linux,code = <169>;
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			gpio-key,wakeup;
 		};
 	};
@@ -92,6 +92,8 @@ &i2c2 {
 	bmp085@77 {
 		compatible = "bosch,bmp085";
 		reg = <0x77>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 	};
 
 	/* leds */
@@ -141,8 +143,8 @@ &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
 	bus-width = <4>;
+	ti,non-removable;
 };
 
 &mmc2 {

arch/arm/boot/dts/omap3-n9.dts

@@ -14,5 +14,5 @@
 
 / {
 	model = "Nokia N9";
-	compatible = "nokia,omap3-n9", "ti,omap3";
+	compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
 };

arch/arm/boot/dts/omap3-n900.dts

 /*
  * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
- * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 (or later) as
@@ -13,7 +13,7 @@
 
 / {
 	model = "Nokia N900";
-	compatible = "nokia,omap3-n900", "ti,omap3";
+	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
 
 	cpus {
 		cpu@0 {

arch/arm/boot/dts/omap3-n950.dts

@@ -14,5 +14,5 @@
 
 / {
 	model = "Nokia N950";
-	compatible = "nokia,omap3-n950", "ti,omap3";
+	compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
 };

arch/arm/boot/dts/omap3-overo-storm-tobi.dts

+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+

arch/arm/boot/dts/omap3-tobi.dts → arch/arm/boot/dts/omap3-overo-tobi-common.dtsi

@@ -13,9 +13,6 @@
 #include "omap3-overo.dtsi"
 
 / {
-	model = "TI OMAP3 Gumstix Overo on Tobi";
-	compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
-
 	leds {
 		compatible = "gpio-leds";
 		heartbeat {

arch/arm/boot/dts/omap3-overo-tobi.dts

+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Tobi";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+

arch/arm/boot/dts/omap3-overo.dtsi

@@ -9,9 +9,6 @@
 /*
  * The Gumstix Overo must be combined with an expansion board.
  */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
 
 / {
 	pwmleds {

arch/arm/boot/dts/tegra114.dtsi

@@ -57,6 +57,8 @@ dc@54200000 {
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
+			nvidia,head = <0>;
+
 			rgb {
 				status = "disabled";
 			};
@@ -72,6 +74,8 @@ dc@54240000 {
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
+			nvidia,head = <1>;
+
 			rgb {
 				status = "disabled";
 			};

arch/arm/boot/dts/tegra20.dtsi

@@ -94,6 +94,8 @@ dc@54200000 {
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
+			nvidia,head = <0>;
+
 			rgb {
 				status = "disabled";
 			};
@@ -109,6 +111,8 @@ dc@54240000 {
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
+			nvidia,head = <1>;
+
 			rgb {
 				status = "disabled";
 			};

arch/arm/boot/dts/tegra30-cardhu.dtsi

@@ -28,7 +28,7 @@ / {
 	compatible = "nvidia,cardhu", "nvidia,tegra30";
 
 	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc0 = "/i2c@7000d000/tps65911@2d";
 		rtc1 = "/rtc@7000e000";
 	};
 

arch/arm/boot/dts/tegra30.dtsi

@@ -170,6 +170,8 @@ dc@54200000 {
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
+			nvidia,head = <0>;
+
 			rgb {
 				status = "disabled";
 			};
@@ -185,6 +187,8 @@ dc@54240000 {
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
+			nvidia,head = <1>;
+
 			rgb {
 				status = "disabled";
 			};

arch/arm/mach-imx/Makefile

@@ -101,11 +101,9 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 
-ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
 # i.MX6SL reuses i.MX6Q code
 obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
-endif
 
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o

arch/arm/mach-imx/common.h

@@ -144,13 +144,11 @@ void imx6q_set_chicken_bit(void);
 void imx_cpu_die(unsigned int cpu);
 int imx_cpu_kill(unsigned int cpu);
 
-#ifdef CONFIG_PM
 void imx6q_pm_init(void);
 void imx6q_pm_set_ccm_base(void __iomem *base);
+#ifdef CONFIG_PM
 void imx5_pm_init(void);
 #else
-static inline void imx6q_pm_init(void) {}
-static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
 static inline void imx5_pm_init(void) {}
 #endif
 

arch/arm/mach-omap1/board-nokia770.c

@@ -156,6 +156,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 16,
 	.pins[0]	= 6,
+	.extcon		= "tahvo-usb",
 };
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)

arch/arm/mach-omap2/Kconfig

@@ -50,6 +50,7 @@ config SOC_OMAP5
 	bool "TI OMAP5"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
@@ -63,6 +64,7 @@ config SOC_AM33XX
 	bool "TI AM33XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select CPU_V7
 	select MULTI_IRQ_HANDLER
@@ -72,6 +74,7 @@ config SOC_AM43XX
 	depends on ARCH_MULTI_V7
 	select CPU_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select MULTI_IRQ_HANDLER
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
@@ -80,6 +83,7 @@ config SOC_DRA7XX
 	bool "TI DRA7XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
@@ -268,9 +272,6 @@ config MACH_OMAP_3430SDP
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_NOKIA_N800
-       bool
-
 config MACH_NOKIA_N810
        bool
 
@@ -281,7 +282,6 @@ config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
 	depends on SOC_OMAP2420
 	default y
-	select MACH_NOKIA_N800
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 	select OMAP_PACKAGE_ZAC

arch/arm/mach-omap2/gpmc.c

@@ -1339,7 +1339,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
 		of_property_read_bool(np, "gpmc,time-para-granularity");
 }
 
-#ifdef CONFIG_MTD_NAND
+#if IS_ENABLED(CONFIG_MTD_NAND)
 
 static const char * const nand_xfer_types[] = {
 	[NAND_OMAP_PREFETCH_POLLED]		= "prefetch-polled",
@@ -1429,7 +1429,7 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
 }
 #endif
 
-#ifdef CONFIG_MTD_ONENAND
+#if IS_ENABLED(CONFIG_MTD_ONENAND)
 static int gpmc_probe_onenand_child(struct platform_device *pdev,
 				 struct device_node *child)
 {

arch/arm/mach-omap2/io.c

@@ -179,15 +179,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 		.length		= L4_EMU_34XX_SIZE,
 		.type		= MT_DEVICE
 	},
-#if defined(CONFIG_DEBUG_LL) &&							\
-	(defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
-	{
-		.virtual	= ZOOM_UART_VIRT,
-		.pfn		= __phys_to_pfn(ZOOM_UART_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	},
-#endif
 };
 #endif
 

arch/arm/mach-pxa/mioa701.c

@@ -38,6 +38,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/reboot.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/max1586.h>
 #include <linux/slab.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -714,6 +715,10 @@ static struct gpio global_gpios[] = {
 	{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
 };
 
+static struct regulator_consumer_supply fixed_5v0_consumers[] = {
+	REGULATOR_SUPPLY("power", "pwm-backlight"),
+};
+
 static void __init mioa701_machine_init(void)
 {
 	int rc;
@@ -753,6 +758,10 @@ static void __init mioa701_machine_init(void)
 	pxa_set_i2c_info(&i2c_pdata);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
+
+	regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
+				     ARRAY_SIZE(fixed_5v0_consumers),
+				     5000000);
 }
 
 static void mioa701_machine_exit(void)

arch/arm/mach-tegra/tegra.c

@@ -73,10 +73,20 @@ u32 tegra_uart_config[3] = {
 static void __init tegra_init_cache(void)
 {
 #ifdef CONFIG_CACHE_L2X0
+	static const struct of_device_id pl310_ids[] __initconst = {
+		{ .compatible = "arm,pl310-cache",  },
+		{}
+	};
+
+	struct device_node *np;
 	int ret;
 	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
 	u32 aux_ctrl, cache_type;
 
+	np = of_find_matching_node(NULL, pl310_ids);
+	if (!np)
+		return;
+
 	cache_type = readl(p + L2X0_CACHE_TYPE);
 	aux_ctrl = (cache_type & 0x700) << (17-8);
 	aux_ctrl |= 0x7C400001;