Skip to content

L
linux
Commit 72cca7ba authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging 

Pull staging/IIO updates from Greg KH:
 "Here's the "big" staging/iio pull request for 4.10-rc1.

  Not as big as 4.9 was, but still just over a thousand changes. We
  almost broke even of lines added vs. removed, as the slicoss driver
  was removed (got a "clean" driver for the same hardware through the
  netdev tree), and some iio drivers were also dropped, but I think we
  ended up adding a few thousand lines to the source tree in the end.
  Other than that it's a lot of minor fixes all over the place, nothing
  major stands out at all.

  All of these have been in linux-next for a while. There will be a
  merge conflict with Al's vfs tree in the lustre code, but the
  resolution for that should be pretty simple, that too has been in
  linux-next"

* tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1002 commits)
  staging: comedi: comedidev.h: Document usage of 'detach' handler
  staging: fsl-mc: remove unnecessary info prints from bus driver
  staging: fsl-mc: add sysfs ABI doc
  staging/lustre/o2iblnd: Fix misspelled attemps->attempts
  staging/lustre/o2iblnd: Fix misspelling intialized->intialized
  staging/lustre: Convert all bare unsigned to unsigned int
  staging/lustre/socklnd: Fix whitespace problem
  staging/lustre/o2iblnd: Add missing space
  staging/lustre/lnetselftest: Fix potential integer overflow
  staging: greybus: audio_module: remove redundant OOM message
  staging: dgnc: Fix lines longer than 80 characters
  staging: dgnc: fix blank line after '{' warnings.
  staging/android: remove Sync Framework tasks from TODO
  staging/lustre/osc: Revert erroneous list_for_each_entry_safe use
  staging: slicoss: remove the staging driver
  staging: lustre: libcfs: remove lnet upcall code
  staging: lustre: remove set but unused variables
  staging: lustre: osc: set lock data for readahead lock
  staging: lustre: import: don't reconnect during connect interpret
  staging: lustre: clio: remove mtime check in vvp_io_fault_start()
  ...
parents 5266e703 3e0f9b2c
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 33601 additions and 29203 deletions
Documentation/ABI/testing/sysfs-bus-fsl-mc 0 → 100644
View file @ 72cca7ba
What: /sys/bus/fsl-mc/drivers/.../bind
Date: December 2016
Contact: stuart.yoder@nxp.com
Description:
Writing a device location to this file will cause
the driver to attempt to bind to the device found at
this location. The format for the location is Object.Id
and is the same as found in /sys/bus/fsl-mc/devices/.
For example:
# echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind
What: /sys/bus/fsl-mc/drivers/.../unbind
Date: December 2016
Contact: stuart.yoder@nxp.com
Description:
Writing a device location to this file will cause the
driver to attempt to unbind from the device found at
this location. The format for the location is Object.Id
and is the same as found in /sys/bus/fsl-mc/devices/.
For example:
# echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind
Documentation/ABI/testing/sysfs-bus-iio
View file @ 72cca7ba
......@@ -329,6 +329,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale
What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale
What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
......@@ -1579,3 +1580,20 @@ Contact: linux-iio@vger.kernel.org
Description:
Raw (unscaled no offset etc.) electric conductivity reading that
can be processed to siemens per meter.
What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw
KernelVersion: 4.9
Contact: linux-iio@vger.kernel.org
Description:
Raw counter device counts from channel Y. For quadrature
counters, multiplication by an available [Y]_scale results in
the counts of a single quadrature signal phase from channel Y.
What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw
KernelVersion: 4.9
Contact: linux-iio@vger.kernel.org
Description:
Raw counter device index value from channel Y. This attribute
provides an absolute positional reference (e.g. a pulse once per
revolution) which may be used to home positional systems as
required.
Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector 0 → 100644
View file @ 72cca7ba
What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_invert
Date: October 2016
KernelVersion: 4.9
Contact: Peter Rosin <peda@axentia.se>
Description:
The DAC is used to find the peak level of an alternating
voltage input signal by a binary search using the output
of a comparator wired to an interrupt pin. Like so:
_
| \
input +------>-------|+ \
| \
.-------. | }---.
| | | / |
| dac|-->--|- / |
| | |_/ |
| | |
| | |
| irq|------<-------'
| |
'-------'
The boolean invert attribute (0/1) should be set when the
input signal is centered around the maximum value of the
dac instead of zero. The envelope detector will search
from below in this case and will also invert the result.
The edge/level of the interrupt is also switched to its
opposite value.
What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_compare_interval
Date: October 2016
KernelVersion: 4.9
Contact: Peter Rosin <peda@axentia.se>
Description:
Number of milliseconds to wait for the comparator in each
step of the binary search for the input peak level. Needs
to relate to the frequency of the input signal.
Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 0 → 100644
View file @ 72cca7ba
What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
What: /sys/bus/iio/devices/iio:deviceX/in_count_count_mode_available
What: /sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available
What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
What: /sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available
What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
KernelVersion: 4.9
Contact: linux-iio@vger.kernel.org
Description:
Discrete set of available values for the respective counter
configuration are listed in this file.
What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
KernelVersion: 4.9
Contact: linux-iio@vger.kernel.org
Description:
Read-only attribute that indicates whether the counter for
channel Y is counting up or down.
What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
KernelVersion: 4.9
Contact: linux-iio@vger.kernel.org
Description:
Count mode for channel Y. Four count modes are available:
normal, range limit, non-recycle, and modulo-n. The preset value
for channel Y is used by the count mode where required.
Normal:
Counting is continuous in either direction.
Range Limit:
An upper or lower limit is set, mimicking limit switches
in the mechanical counterpart. The upper limit is set to
the preset value, while the lower limit is set to 0. The
counter freezes at count = preset when counting up, and
at count = 0 when counting down. At either of these
limits, the counting is resumed only when the count
direction is reversed.
Non-recycle:
Counter is disabled whenever a 24-bit count overflow or
underflow takes place. The counter is re-enabled when a
new count value is loaded to the counter via a preset
operation or write to raw.
Modulo-N:
A count boundary is set between 0 and the preset value.
The counter is reset to 0 at count = preset when
counting up, while the counter is set to the preset
value at count = 0 when counting down; the counter does
not freeze at the bundary points, but counts
continuously throughout.
What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
KernelVersion: 4.9
Contact: linux-iio@vger.kernel.org
Description:
Read-only attribute that indicates whether excessive noise is
present at the channel Y count inputs in quadrature clock mode;
irrelevant in non-quadrature clock mode.
What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset
KernelVersion: 4.9
Contact: linux-iio@vger.kernel.org
Description:
If the counter device supports preset registers, the preset
count for channel Y is provided by this attribute.
What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
KernelVersion: 4.9
Contact: linux-iio@vger.kernel.org
Description:
Configure channel Y counter for non-quadrature or quadrature
clock mode. Selecting non-quadrature clock mode will disable
synchronous load mode. In quadrature clock mode, the channel Y
scale attribute selects the encoder phase division (scale of 1
selects full-cycle, scale of 0.5 selects half-cycle, scale of
0.25 selects quarter-cycle) processed by the channel Y counter.
Non-quadrature:
The filter and decoder circuit are bypassed. Encoder A
input serves as the count input and B as the UP/DOWN
direction control input, with B = 1 selecting UP Count
mode and B = 0 selecting Down Count mode.
Quadrature:
Encoder A and B inputs are digitally filtered and
decoded for UP/DN clock.
What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
KernelVersion: 4.9
Contact: linux-iio@vger.kernel.org
Description:
Whether to set channel Y counter with channel Y preset value
when channel Y index input is active, or continuously count.
Valid attribute values are boolean.
What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
KernelVersion: 4.9
Contact: linux-iio@vger.kernel.org
Description:
Active level of channel Y index input; irrelevant in
non-synchronous load mode.
What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
KernelVersion: 4.9
Contact: linux-iio@vger.kernel.org
Description:
Configure channel Y counter for non-synchronous or synchronous
load mode. Synchronous load mode cannot be selected in
non-quadrature clock mode.
Non-synchronous:
A logic low level is the active level at this index
input. The index function (as enabled via
set_to_preset_on_index) is performed directly on the
active level of the index input.
Synchronous:
Intended for interfacing with encoder Index output in
quadrature clock mode. The active level is configured
via index_polarity. The index function (as enabled via
set_to_preset_on_index) is performed synchronously with
the quadrature clock on the active level of the index
input.
Documentation/ABI/testing/sysfs-bus-iio-cros-ec 0 → 100644
View file @ 72cca7ba
What: /sys/bus/iio/devices/iio:deviceX/calibrate
Date: July 2015
KernelVersion: 4.7
Contact: linux-iio@vger.kernel.org
Description:
Writing '1' will perform a FOC (Fast Online Calibration). The
corresponding calibration offsets can be read from *_calibbias
entries.
What: /sys/bus/iio/devices/iio:deviceX/location
Date: July 2015
KernelVersion: 4.7
Contact: linux-iio@vger.kernel.org
Description:
This attribute returns a string with the physical location where
the motion sensor is placed. For example, in a laptop a motion
sensor can be located on the base or on the lid. Current valid
values are 'base' and 'lid'.
Documentation/ABI/testing/sysfs-bus-iio-dac-dpot-dac 0 → 100644
View file @ 72cca7ba
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw_available
Date: October 2016
KernelVersion: 4.9
Contact: Peter Rosin <peda@axentia.se>
Description:
The range of available values represented as the minimum value,
the step and the maximum value, all enclosed in square brackets.
Example: [0 1 256]
Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 0 → 100644
View file @ 72cca7ba
What: /sys/bus/iio/devices/iio:deviceX/proximity_on_chip_ambient_infrared_suppression
Date: January 2011
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
From ISL29018 Data Sheet (FN6619.4, Oct 8, 2012) regarding the
infrared suppression:
Scheme 0, makes full n (4, 8, 12, 16) bits (unsigned) proximity
detection. The range of Scheme 0 proximity count is from 0 to
2^n. Logic 1 of this bit, Scheme 1, makes n-1 (3, 7, 11, 15)
bits (2's complementary) proximity_less_ambient detection. The
range of Scheme 1 proximity count is from -2^(n-1) to 2^(n-1).
The sign bit is extended for resolutions less than 16. While
Scheme 0 has wider dynamic range, Scheme 1 proximity detection
is less affected by the ambient IR noise variation.
0 Sensing IR from LED and ambient
1 Sensing IR from LED with ambient IR rejection
drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 → Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583
View file @ 72cca7ba
What: /sys/bus/iio/devices/device[n]/lux_table
What: /sys/bus/iio/devices/device[n]/in_illuminance_calibrate
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
This property gets/sets the table of coefficients
used in calculating illuminance in lux.
This property causes an internal calibration of the als gain trim
value which is later used in calculating illuminance in lux.
What: /sys/bus/iio/devices/device[n]/illuminance0_calibrate
What: /sys/bus/iio/devices/device[n]/in_illuminance_lux_table
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
This property causes an internal calibration of the als gain trim
value which is later used in calculating illuminance in lux.
This property gets/sets the table of coefficients
used in calculating illuminance in lux.
What: /sys/bus/iio/devices/device[n]/illuminance0_input_target
What: /sys/bus/iio/devices/device[n]/in_illuminance_input_target
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
......
Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531 0 → 100644
View file @ 72cca7ba
What: /sys/bus/iio/devices/iio:deviceX/out_resistance_raw_available
Date: October 2016
KernelVersion: 4.9
Contact: Peter Rosin <peda@axentia.se>
Description:
The range of available values represented as the minimum value,
the step and the maximum value, all enclosed in square brackets.
Example: [0 1 256]
Documentation/devicetree/bindings/i2c/trivial-devices.txt
View file @ 72cca7ba
......@@ -39,11 +39,13 @@ dallas,ds75 Digital Thermometer and Thermostat
dlg,da9053 DA9053: flexible system level PMIC with multicore support
dlg,da9063 DA9063: system PMIC for quad-core application processors
domintech,dmard09 DMARD09: 3-axis Accelerometer
domintech,dmard10 DMARD10: 3-axis Accelerometer
epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
fsl,mma7660 MMA7660FC: 3-Axis Orientation/Motion Detection Sensor
fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
fsl,mpl3115 MPL3115: Absolute Digital Pressure Sensor
fsl,mpr121 MPR121: Proximity Capacitive Touch Sensor Controller
......@@ -57,6 +59,7 @@ maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
mc,rv3029c2 Real Time Clock Module with I2C-Bus
mcube,mc3230 mCube 3-axis 8-bit digital accelerometer
memsic,mxc6225 MEMSIC 2-axis 8-bit digital accelerometer
microchip,mcp4531-502 Microchip 7-bit Single I2C Digital Potentiometer (5k)
microchip,mcp4531-103 Microchip 7-bit Single I2C Digital Potentiometer (10k)
microchip,mcp4531-503 Microchip 7-bit Single I2C Digital Potentiometer (50k)
......@@ -121,6 +124,9 @@ microchip,mcp4662-502 Microchip 8-bit Dual I2C Digital Potentiometer with NV Mem
microchip,mcp4662-103 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k)
microchip,mcp4662-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k)
microchip,mcp4662-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k)
miramems,da226 MiraMEMS DA226 2-axis 14-bit digital accelerometer
miramems,da280 MiraMEMS DA280 3-axis 14-bit digital accelerometer
miramems,da311 MiraMEMS DA311 3-axis 12-bit digital accelerometer
national,lm63 Temperature sensor with integrated fan control
national,lm75 I2C TEMP SENSOR
national,lm80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
......@@ -146,6 +152,7 @@ ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
sgx,vz89x SGX Sensortech VZ89X Sensors
sii,s35390a 2-wire CMOS real-time clock
silabs,si7020 Relative Humidity and Temperature Sensors
skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
st,24c256 i2c serial eeprom (24cxx)
st,m41t00 Serial real-time clock (RTC)
......
Documentation/devicetree/bindings/iio/adc/envelope-detector.txt 0 → 100644
View file @ 72cca7ba
Bindings for ADC envelope detector using a DAC and a comparator
The DAC is used to find the peak level of an alternating voltage input
signal by a binary search using the output of a comparator wired to
an interrupt pin. Like so:
_
| \
input +------>-------|+ \
| \
.-------. | }---.
| | | / |
| dac|-->--|- / |
| | |_/ |
| | |
| | |
| irq|------<-------'
| |
'-------'
Required properties:
- compatible: Should be "axentia,tse850-envelope-detector"
- io-channels: Channel node of the dac to be used for comparator input.
- io-channel-names: Should be "dac".
- interrupt specification for one client interrupt,
see ../../interrupt-controller/interrupts.txt for details.
- interrupt-names: Should be "comp".
Example:
&i2c {
dpot: mcp4651-104@28 {
compatible = "microchip,mcp4651-104";
reg = <0x28>;
#io-channel-cells = <1>;
};
};
dac: dac {
compatible = "dpot-dac";
vref-supply = <&reg_3v3>;
io-channels = <&dpot 0>;
io-channel-names = "dpot";
#io-channel-cells = <1>;
};
envelope-detector {
compatible = "axentia,tse850-envelope-detector";
io-channels = <&dac 0>;
io-channel-names = "dac";
interrupt-parent = <&gpio>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "comp";
};
Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt 0 → 100644
View file @ 72cca7ba
STMicroelectronics STM32 ADC device driver
STM32 ADC is a successive approximation analog-to-digital converter.
It has several multiplexed input channels. Conversions can be performed
in single, continuous, scan or discontinuous mode. Result of the ADC is
stored in a left-aligned or right-aligned 32-bit data register.
Conversions can be launched in software or using hardware triggers.
The analog watchdog feature allows the application to detect if the input
voltage goes beyond the user-defined, higher or lower thresholds.
Each STM32 ADC block can have up to 3 ADC instances.
Each instance supports two contexts to manage conversions, each one has its
own configurable sequence and trigger:
- regular conversion can be done in sequence, running in background
- injected conversions have higher priority, and so have the ability to
interrupt regular conversion sequence (either triggered in SW or HW).
Regular sequence is resumed, in case it has been interrupted.
Contents of a stm32 adc root node:
-----------------------------------
Required properties:
- compatible: Should be "st,stm32f4-adc-core".
- reg: Offset and length of the ADC block register set.
- interrupts: Must contain the interrupt for ADC block.
- clocks: Clock for the analog circuitry (common to all ADCs).
- clock-names: Must be "adc".
- interrupt-controller: Identifies the controller node as interrupt-parent
- vref-supply: Phandle to the vref input analog reference voltage.
- #interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
Optional properties:
- A pinctrl state named "default" for each ADC channel may be defined to set
inX ADC pins in mode of operation for analog input on external pin.
Contents of a stm32 adc child node:
-----------------------------------
An ADC block node should contain at least one subnode, representing an
ADC instance available on the machine.
Required properties:
- compatible: Should be "st,stm32f4-adc".
- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
- clocks: Input clock private to this ADC instance.
- interrupt-parent: Phandle to the parent interrupt controller.
- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or
2 for adc@200).
- st,adc-channels: List of single-ended channels muxed for this ADC.
It can have up to 16 channels, numbered from 0 to 15 (resp. for in0..in15).
- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
Documentation/devicetree/bindings/iio/iio-bindings.txt
Example:
adc: adc@40012000 {
compatible = "st,stm32f4-adc-core";
reg = <0x40012000 0x400>;
interrupts = <18>;
clocks = <&rcc 0 168>;
clock-names = "adc";
vref-supply = <&reg_vref>;
interrupt-controller;
pinctrl-names = "default";
pinctrl-0 = <&adc3_in8_pin>;
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "st,stm32f4-adc";
#io-channel-cells = <1>;
reg = <0x0>;
clocks = <&rcc 0 168>;
interrupt-parent = <&adc>;
interrupts = <0>;
st,adc-channels = <8>;
};
...
other adc child nodes follow...
};
Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt
View file @ 72cca7ba
......@@ -3,6 +3,7 @@
Required properties:
- compatible: Should be "ti,adc141s626" or "ti,adc161s626"
- reg: spi chip select number for the device
- vdda-supply: supply voltage to VDDA pin
Recommended properties:
- spi-max-frequency: Definition as per
......@@ -11,6 +12,7 @@ Recommended properties:
Example:
adc@0 {
compatible = "ti,adc161s626";
vdda-supply = <&vdda_fixed>;
reg = <0>;
spi-max-frequency = <4300000>;
};
Documentation/devicetree/bindings/iio/dac/dpot-dac.txt 0 → 100644
View file @ 72cca7ba
Bindings for DAC emulation using a digital potentiometer
It is assumed that the dpot is used as a voltage divider between the
current dpot wiper setting and the maximum resistance of the dpot. The
divided voltage is provided by a vref regulator.
.------.
.-----------. | |
| vref |--' .---.
| regulator |--. | |
'-----------' | | d |
| | p |
| | o | wiper
| | t |<---------+
| | |
| '---' dac output voltage
| |
'------+------------+
Required properties:
- compatible: Should be "dpot-dac"
- vref-supply: The regulator supplying the voltage divider.
- io-channels: Channel node of the dpot to be used for the voltage division.
- io-channel-names: Should be "dpot".
Example:
&i2c {
dpot: mcp4651-503@28 {
compatible = "microchip,mcp4651-503";
reg = <0x28>;
#io-channel-cells = <1>;
};
};
dac {
compatible = "dpot-dac";
vref-supply = <&reg_3v3>;
io-channels = <&dpot 0>;
io-channel-names = "dpot";
};
Documentation/devicetree/bindings/iio/dac/mcp4725.txt 0 → 100644
View file @ 72cca7ba
Microchip mcp4725 and mcp4726 DAC device driver
Required properties:
- compatible: Must be "microchip,mcp4725" or "microchip,mcp4726"
- reg: Should contain the DAC I2C address
- vdd-supply: Phandle to the Vdd power supply. This supply is used as a
voltage reference on mcp4725. It is used as a voltage reference on
mcp4726 if there is no vref-supply specified.
Optional properties (valid only for mcp4726):
- vref-supply: Optional phandle to the Vref power supply. Vref pin is
used as a voltage reference when this supply is specified.
- microchip,vref-buffered: Boolean to enable buffering of the external
Vref pin. This boolean is not valid without the vref-supply. Quoting
the datasheet: This is offered in cases where the reference voltage
does not have the current capability not to drop its voltage when
connected to the internal resistor ladder circuit.
Examples:
/* simple mcp4725 */
mcp4725@60 {
compatible = "microchip,mcp4725";
reg = <0x60>;
vdd-supply = <&vdac_vdd>;
};
/* mcp4726 with the buffered external reference voltage */
mcp4726@60 {
compatible = "microchip,mcp4726";
reg = <0x60>;
vdd-supply = <&vdac_vdd>;
vref-supply = <&vdac_vref>;
microchip,vref-buffered;
};
Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt 0 → 100644
View file @ 72cca7ba
Invensense MPU-3050 Gyroscope device tree bindings
Required properties:
- compatible : should be "invensense,mpu3050"
- reg : the I2C address of the sensor
Optional properties:
- interrupt-parent : should be the phandle for the interrupt controller
- interrupts : interrupt mapping for the trigger interrupt from the
internal oscillator. The following IRQ modes are supported:
IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH and
IRQ_TYPE_LEVEL_LOW. The driver should detect and configure the hardware
for the desired interrupt type.
- vdd-supply : supply regulator for the main power voltage.
- vlogic-supply : supply regulator for the signal voltage.
- mount-matrix : see iio/mount-matrix.txt
Optional subnodes:
- The MPU-3050 will pass through and forward the I2C signals from the
incoming I2C bus, alternatively drive traffic to a slave device (usually
an accelerometer) on its own initiative. Therefore is supports a subnode
i2c gate node. For details see: i2c/i2c-gate.txt
Example:
mpu3050@68 {
compatible = "invensense,mpu3050";
reg = <0x68>;
interrupt-parent = <&foo>;
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&bar>;
vlogic-supply = <&baz>;
/* External I2C interface */
i2c-gate {
#address-cells = <1>;
#size-cells = <0>;
fnord@18 {
compatible = "fnord";
reg = <0x18>;
interrupt-parent = <&foo>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
};
};
};
Documentation/devicetree/bindings/iio/humidity/hts221.txt 0 → 100644
View file @ 72cca7ba
* HTS221 STM humidity + temperature sensor
Required properties:
- compatible: should be "st,hts221"
- reg: i2c address of the sensor / spi cs line
Optional properties:
- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ. It should be configured with
flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING.
Refer to interrupt-controller/interrupts.txt for generic interrupt
client node bindings.
Example:
hts221@5f {
compatible = "st,hts221";
reg = <0x5f>;
interrupt-parent = <&gpio0>;
interrupts = <0 IRQ_TYPE_EDGE_RISING>;
};
Documentation/devicetree/bindings/iio/light/isl29018.txt 0 → 100644
View file @ 72cca7ba
* ISL 29018/29023/29035 I2C ALS, Proximity, and Infrared sensor
Required properties:
- compatible: Should be one of
"isil,isl29018"
"isil,isl29023"
"isil,isl29035"
- reg: the I2C address of the device
Optional properties:
- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
node bindings.
- vcc-supply: phandle to the regulator that provides power to the sensor.
Example:
isl29018@44 {
compatible = "isil,isl29018";
reg = <0x44>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
};
Documentation/devicetree/bindings/iio/light/tsl2583.txt 0 → 100644
View file @ 72cca7ba
* TAOS TSL 2580/2581/2583 ALS sensor
Required properties:
- compatible: Should be one of
"amstaos,tsl2580"
"amstaos,tsl2581"
"amstaos,tsl2583"
- reg: the I2C address of the device
Optional properties:
- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: the sole interrupt generated by the device
Refer to interrupt-controller/interrupts.txt for generic interrupt client
node bindings.
- vcc-supply: phandle to the regulator that provides power to the sensor.
Example:
tsl2581@29 {
compatible = "amstaos,tsl2581";
reg = <0x29>;
};
Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt 0 → 100644
View file @ 72cca7ba
* Texas Instruments LMP91000 potentiostat
http://www.ti.com/lit/ds/symlink/lmp91000.pdf
Required properties:
- compatible: should be "ti,lmp91000"
- reg: the I2C address of the device
- io-channels: the phandle of the iio provider
- ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this
needs to be set to signal that an external resistor value is being used.
Optional properties:
- ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance
amplifier. Must be 2750, 3500, 7000, 14000, 35000, 120000, or 350000 ohms.
- ti,rload-ohm: ohm value of the internal resistor load applied to the gas
sensor. Must be 10, 33, 50, or 100 (default) ohms.
Example:
lmp91000@48 {
compatible = "ti,lmp91000";
reg = <0x48>;
ti,tia-gain-ohm = <7500>;
ti,rload = <100>;
io-channels = <&adc>;
};
Documentation/devicetree/bindings/iio/st-sensors.txt
View file @ 72cca7ba
......@@ -42,6 +42,7 @@ Accelerometers:
- st,lsm303agr-accel
- st,lis2dh12-accel
- st,h3lis331dl-accel
- st,lng2dm-accel
Gyroscopes:
- st,l3g4200d-gyro
......
Documentation/devicetree/bindings/vendor-prefixes.txt
View file @ 72cca7ba
......@@ -39,6 +39,7 @@ auo AU Optronics Corporation
auvidea Auvidea GmbH
avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
axentia Axentia Technologies AB
axis Axis Communications AB
boe BOE Technology Group Co., Ltd.
bosch Bosch Sensortec GmbH
......@@ -160,16 +161,19 @@ lltc Linear Technology Corporation
lsi LSI Corp. (LSI Logic)
marvell Marvell Technology Group Ltd.
maxim Maxim Integrated Products
mcube mCube
meas Measurement Specialties
mediatek MediaTek Inc.
melexis Melexis N.V.
melfas MELFAS Inc.
memsic MEMSIC Inc.
merrii Merrii Technology Co., Ltd.
micrel Micrel Inc.
microchip Microchip Technology Inc.
microcrystal Micro Crystal AG
micron Micron Technology Inc.
minix MINIX Technology Ltd.
miramems MiraMEMS Sensing Technology Co., Ltd.
mitsubishi Mitsubishi Electric Corporation
mosaixtech Mosaix Technologies, Inc.
moxa Moxa
......
MAINTAINERS
View file @ 72cca7ba
......@@ -260,6 +260,12 @@ L: linux-gpio@vger.kernel.org
S: Maintained
F: drivers/gpio/gpio-104-idio-16.c
ACCES 104-QUAD-8 IIO DRIVER
M: William Breathitt Gray <vilhelm.gray@gmail.com>
L: linux-iio@vger.kernel.org
S: Maintained
F: drivers/iio/counter/104-quad-8.c
ACENIC DRIVER
M: Jes Sorensen <jes@trained-monkey.org>
L: linux-acenic@sunsite.dk
......@@ -803,7 +809,7 @@ S: Supported
F: drivers/iio/*/ad*
X: drivers/iio/*/adjd*
F: drivers/staging/iio/*/ad*
F: staging/iio/trigger/iio-trig-bfin-timer.c
F: drivers/staging/iio/trigger/iio-trig-bfin-timer.c
ANALOG DEVICES INC DMA DRIVERS
M: Lars-Peter Clausen <lars@metafoo.de>
......@@ -2612,6 +2618,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
S: Maintained
N: bcm2835
F: drivers/staging/vc04_services
BROADCOM BCM47XX MIPS ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
......@@ -5192,13 +5199,6 @@ F: sound/soc/fsl/fsl*
F: sound/soc/fsl/imx*
F: sound/soc/fsl/mpc8610_hpcd.c
FREESCALE QORIQ MANAGEMENT COMPLEX DRIVER
M: "J. German Rivera" <German.Rivera@freescale.com>
M: Stuart Yoder <stuart.yoder@nxp.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/staging/fsl-mc/
FREEVXFS FILESYSTEM
M: Christoph Hellwig <hch@infradead.org>
W: ftp://ftp.openlinux.org/pub/people/hch/vxfs
......@@ -6215,6 +6215,22 @@ L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/rc/iguanair.c
IIO DIGITAL POTENTIOMETER DAC
M: Peter Rosin <peda@axentia.se>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-iio-dac-dpot-dac
F: Documentation/devicetree/bindings/iio/dac/dpot-dac.txt
F: drivers/iio/dac/dpot-dac.c
IIO ENVELOPE DETECTOR
M: Peter Rosin <peda@axentia.se>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
F: Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
F: drivers/iio/adc/envelope-detector.c
IIO SUBSYSTEM AND DRIVERS
M: Jonathan Cameron <jic23@kernel.org>
R: Hartmut Knaack <knaack.h@gmx.de>
......@@ -6596,6 +6612,13 @@ S: Maintained
F: arch/x86/include/asm/pmc_core.h
F: drivers/platform/x86/intel_pmc_core*
INVENSENSE MPU-3050 GYROSCOPE DRIVER
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-iio@vger.kernel.org
S: Maintained
F: drivers/iio/gyro/mpu3050*
F: Documentation/devicetree/bindings/iio/gyroscope/inv,mpu3050.txt
IOC3 ETHERNET DRIVER
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
......@@ -7803,6 +7826,7 @@ MCP4531 MICROCHIP DIGITAL POTENTIOMETER DRIVER
M: Peter Rosin <peda@axentia.se>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531
F: drivers/iio/potentiometer/mcp4531.c
MEASUREMENT COMPUTING CIO-DAC IIO DRIVER
......@@ -10056,6 +10080,12 @@ F: fs/qnx4/
F: include/uapi/linux/qnx4_fs.h
F: include/uapi/linux/qnxtypes.h
QORIQ DPAA2 FSL-MC BUS DRIVER
M: Stuart Yoder <stuart.yoder@nxp.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/staging/fsl-mc/
QT1010 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
......@@ -11647,12 +11677,6 @@ L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/staging/sm750fb/
STAGING - SLICOSS
M: Lior Dotan <liodot@gmail.com>
M: Christopher Harrer <charrer@alacritech.com>
S: Odd Fixes
F: drivers/staging/slicoss/
STAGING - SPEAKUP CONSOLE SPEECH DRIVER
M: William Hubbs <w.d.hubbs@gmail.com>
M: Chris Brannon <chris@the-brannons.com>
......
drivers/iio/Kconfig
View file @ 72cca7ba
......@@ -73,6 +73,7 @@ source "drivers/iio/adc/Kconfig"
source "drivers/iio/amplifiers/Kconfig"
source "drivers/iio/chemical/Kconfig"
source "drivers/iio/common/Kconfig"
source "drivers/iio/counter/Kconfig"
source "drivers/iio/dac/Kconfig"
source "drivers/iio/dummy/Kconfig"
source "drivers/iio/frequency/Kconfig"
......@@ -87,6 +88,7 @@ if IIO_TRIGGER
source "drivers/iio/trigger/Kconfig"
endif #IIO_TRIGGER
source "drivers/iio/potentiometer/Kconfig"
source "drivers/iio/potentiostat/Kconfig"
source "drivers/iio/pressure/Kconfig"
source "drivers/iio/proximity/Kconfig"
source "drivers/iio/temperature/Kconfig"
......
drivers/iio/Makefile
View file @ 72cca7ba
......@@ -18,6 +18,7 @@ obj-y += amplifiers/
obj-y += buffer/
obj-y += chemical/
obj-y += common/
obj-y += counter/
obj-y += dac/
obj-y += dummy/
obj-y += gyro/
......@@ -29,6 +30,7 @@ obj-y += light/
obj-y += magnetometer/
obj-y += orientation/
obj-y += potentiometer/
obj-y += potentiostat/
obj-y += pressure/
obj-y += proximity/
obj-y += temperature/
......
drivers/iio/accel/Kconfig
View file @ 72cca7ba
......@@ -52,6 +52,26 @@ config BMC150_ACCEL_SPI
tristate
select REGMAP_SPI
config DA280
tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver"
depends on I2C
help
Say yes here to build support for the MiraMEMS DA280 3-axis 14-bit
digital accelerometer.
To compile this driver as a module, choose M here: the
module will be called da280.
config DA311
tristate "MiraMEMS DA311 3-axis 12-bit digital accelerometer driver"
depends on I2C
help
Say yes here to build support for the MiraMEMS DA311 3-axis 12-bit
digital accelerometer.
To compile this driver as a module, choose M here: the
module will be called da311.
config DMARD06
tristate "Domintech DMARD06 Digital Accelerometer Driver"
depends on OF || COMPILE_TEST
......@@ -73,6 +93,16 @@ config DMARD09
Choosing M will build the driver as a module. If so, the module
will be called dmard09.
config DMARD10
tristate "Domintech DMARD10 3-axis Accelerometer Driver"
depends on I2C
help
Say yes here to get support for the Domintech DMARD10 3-axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called dmard10.
config HID_SENSOR_ACCEL_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
......@@ -97,7 +127,8 @@ config IIO_ST_ACCEL_3AXIS
help
Say yes here to build support for STMicroelectronics accelerometers:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL.
LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
LNG2DM
This driver can also be built as a module. If so, these modules
will be created:
......@@ -273,6 +304,18 @@ config MXC6255
To compile this driver as a module, choose M here: the module will be
called mxc6255.
config SCA3000
select IIO_BUFFER
select IIO_KFIFO_BUF
depends on SPI
tristate "VTI SCA3000 series accelerometers"
help
Say Y here to build support for the VTI SCA3000 series of SPI
accelerometers. These devices use a hardware ring buffer.
To compile this driver as a module, say M here: the module will be
called sca3000.
config STK8312
tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
depends on I2C
......
drivers/iio/accel/Makefile
View file @ 72cca7ba
......@@ -8,8 +8,11 @@ obj-$(CONFIG_BMA220) += bma220_spi.o
obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
obj-$(CONFIG_DA280) += da280.o
obj-$(CONFIG_DA311) += da311.o
obj-$(CONFIG_DMARD06) += dmard06.o
obj-$(CONFIG_DMARD09) += dmard09.o
obj-$(CONFIG_DMARD10) += dmard10.o
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
obj-$(CONFIG_KXSD9) += kxsd9.o
......@@ -32,6 +35,8 @@ obj-$(CONFIG_MMA9553) += mma9553.o
obj-$(CONFIG_MXC4005) += mxc4005.o
obj-$(CONFIG_MXC6255) += mxc6255.o
obj-$(CONFIG_SCA3000) += sca3000.o
obj-$(CONFIG_STK8312) += stk8312.o
obj-$(CONFIG_STK8BA50) += stk8ba50.o
......
drivers/iio/accel/da280.c 0 → 100644
View file @ 72cca7ba
/**
* IIO driver for the MiraMEMS DA280 3-axis accelerometer and
* IIO driver for the MiraMEMS DA226 2-axis accelerometer
*
* Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/byteorder/generic.h>
#define DA280_REG_CHIP_ID 0x01
#define DA280_REG_ACC_X_LSB 0x02
#define DA280_REG_ACC_Y_LSB 0x04
#define DA280_REG_ACC_Z_LSB 0x06
#define DA280_REG_MODE_BW 0x11
#define DA280_CHIP_ID 0x13
#define DA280_MODE_ENABLE 0x1e
#define DA280_MODE_DISABLE 0x9e
enum { da226, da280 };
/*
* a value of + or -4096 corresponds to + or - 1G
* scale = 9.81 / 4096 = 0.002395019
*/
static const int da280_nscale = 2395019;
#define DA280_CHANNEL(reg, axis) { \
.type = IIO_ACCEL, \
.address = reg, \
.modified = 1, \
.channel2 = IIO_MOD_##axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
}
static const struct iio_chan_spec da280_channels[] = {
DA280_CHANNEL(DA280_REG_ACC_X_LSB, X),
DA280_CHANNEL(DA280_REG_ACC_Y_LSB, Y),
DA280_CHANNEL(DA280_REG_ACC_Z_LSB, Z),
};
struct da280_data {
struct i2c_client *client;
};
static int da280_enable(struct i2c_client *client, bool enable)
{
u8 data = enable ? DA280_MODE_ENABLE : DA280_MODE_DISABLE;
return i2c_smbus_write_byte_data(client, DA280_REG_MODE_BW, data);
}
static int da280_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct da280_data *data = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = i2c_smbus_read_word_data(data->client, chan->address);
if (ret < 0)
return ret;
/*
* Values are 14 bits, stored as 16 bits with the 2
* least significant bits always 0.
*/
*val = (short)ret >> 2;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
*val2 = da280_nscale;
return IIO_VAL_INT_PLUS_NANO;
default:
return -EINVAL;
}
}
static const struct iio_info da280_info = {
.driver_module = THIS_MODULE,
.read_raw = da280_read_raw,
};
static int da280_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct iio_dev *indio_dev;
struct da280_data *data;
ret = i2c_smbus_read_byte_data(client, DA280_REG_CHIP_ID);
if (ret != DA280_CHIP_ID)
return (ret < 0) ? ret : -ENODEV;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
data->client = client;
i2c_set_clientdata(client, indio_dev);
indio_dev->dev.parent = &client->dev;
indio_dev->info = &da280_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = da280_channels;
if (id->driver_data == da226) {
indio_dev->name = "da226";
indio_dev->num_channels = 2;
} else {
indio_dev->name = "da280";
indio_dev->num_channels = 3;
}
ret = da280_enable(client, true);
if (ret < 0)
return ret;
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "device_register failed\n");
da280_enable(client, false);
}
return ret;
}
static int da280_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
iio_device_unregister(indio_dev);
return da280_enable(client, false);
}
#ifdef CONFIG_PM_SLEEP
static int da280_suspend(struct device *dev)
{
return da280_enable(to_i2c_client(dev), false);
}
static int da280_resume(struct device *dev)
{
return da280_enable(to_i2c_client(dev), true);
}
#endif
static SIMPLE_DEV_PM_OPS(da280_pm_ops, da280_suspend, da280_resume);
static const struct i2c_device_id da280_i2c_id[] = {
{ "da226", da226 },
{ "da280", da280 },
{}
};
MODULE_DEVICE_TABLE(i2c, da280_i2c_id);
static struct i2c_driver da280_driver = {
.driver = {
.name = "da280",
.pm = &da280_pm_ops,
},
.probe = da280_probe,
.remove = da280_remove,
.id_table = da280_i2c_id,
};
module_i2c_driver(da280_driver);
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_DESCRIPTION("MiraMEMS DA280 3-Axis Accelerometer driver");
MODULE_LICENSE("GPL v2");
drivers/iio/accel/da311.c 0 → 100644
View file @ 72cca7ba
/**
* IIO driver for the MiraMEMS DA311 3-axis accelerometer
*
* Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
* Copyright (c) 2011-2013 MiraMEMS Sensing Technology Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/byteorder/generic.h>
#define DA311_CHIP_ID 0x13
/*
* Note register addressed go from 0 - 0x3f and then wrap.
* For some reason there are 2 banks with 0 - 0x3f addresses,
* rather then a single 0-0x7f bank.
*/
/* Bank 0 regs */
#define DA311_REG_BANK 0x0000
#define DA311_REG_LDO_REG 0x0006
#define DA311_REG_CHIP_ID 0x000f
#define DA311_REG_TEMP_CFG_REG 0x001f
#define DA311_REG_CTRL_REG1 0x0020
#define DA311_REG_CTRL_REG3 0x0022
#define DA311_REG_CTRL_REG4 0x0023
#define DA311_REG_CTRL_REG5 0x0024
#define DA311_REG_CTRL_REG6 0x0025
#define DA311_REG_STATUS_REG 0x0027
#define DA311_REG_OUT_X_L 0x0028
#define DA311_REG_OUT_X_H 0x0029
#define DA311_REG_OUT_Y_L 0x002a
#define DA311_REG_OUT_Y_H 0x002b
#define DA311_REG_OUT_Z_L 0x002c
#define DA311_REG_OUT_Z_H 0x002d
#define DA311_REG_INT1_CFG 0x0030
#define DA311_REG_INT1_SRC 0x0031
#define DA311_REG_INT1_THS 0x0032
#define DA311_REG_INT1_DURATION 0x0033
#define DA311_REG_INT2_CFG 0x0034
#define DA311_REG_INT2_SRC 0x0035
#define DA311_REG_INT2_THS 0x0036
#define DA311_REG_INT2_DURATION 0x0037
#define DA311_REG_CLICK_CFG 0x0038
#define DA311_REG_CLICK_SRC 0x0039
#define DA311_REG_CLICK_THS 0x003a
#define DA311_REG_TIME_LIMIT 0x003b
#define DA311_REG_TIME_LATENCY 0x003c
#define DA311_REG_TIME_WINDOW 0x003d
/* Bank 1 regs */
#define DA311_REG_SOFT_RESET 0x0105
#define DA311_REG_OTP_XOFF_L 0x0110
#define DA311_REG_OTP_XOFF_H 0x0111
#define DA311_REG_OTP_YOFF_L 0x0112
#define DA311_REG_OTP_YOFF_H 0x0113
#define DA311_REG_OTP_ZOFF_L 0x0114
#define DA311_REG_OTP_ZOFF_H 0x0115
#define DA311_REG_OTP_XSO 0x0116
#define DA311_REG_OTP_YSO 0x0117
#define DA311_REG_OTP_ZSO 0x0118
#define DA311_REG_OTP_TRIM_OSC 0x011b
#define DA311_REG_LPF_ABSOLUTE 0x011c
#define DA311_REG_TEMP_OFF1 0x0127
#define DA311_REG_TEMP_OFF2 0x0128
#define DA311_REG_TEMP_OFF3 0x0129
#define DA311_REG_OTP_TRIM_THERM_H 0x011a
/*
* a value of + or -1024 corresponds to + or - 1G
* scale = 9.81 / 1024 = 0.009580078
*/
static const int da311_nscale = 9580078;
#define DA311_CHANNEL(reg, axis) { \
.type = IIO_ACCEL, \
.address = reg, \
.modified = 1, \
.channel2 = IIO_MOD_##axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
}
static const struct iio_chan_spec da311_channels[] = {
/* | 0x80 comes from the android driver */
DA311_CHANNEL(DA311_REG_OUT_X_L | 0x80, X),
DA311_CHANNEL(DA311_REG_OUT_Y_L | 0x80, Y),
DA311_CHANNEL(DA311_REG_OUT_Z_L | 0x80, Z),
};
struct da311_data {
struct i2c_client *client;
};
static int da311_register_mask_write(struct i2c_client *client, u16 addr,
u8 mask, u8 data)
{
int ret;
u8 tmp_data = 0;
if (addr & 0xff00) {
/* Select bank 1 */
ret = i2c_smbus_write_byte_data(client, DA311_REG_BANK, 0x01);
if (ret < 0)
return ret;
}
if (mask != 0xff) {
ret = i2c_smbus_read_byte_data(client, addr);
if (ret < 0)
return ret;
tmp_data = ret;
}
tmp_data &= ~mask;
tmp_data |= data & mask;
ret = i2c_smbus_write_byte_data(client, addr & 0xff, tmp_data);
if (ret < 0)
return ret;
if (addr & 0xff00) {
/* Back to bank 0 */
ret = i2c_smbus_write_byte_data(client, DA311_REG_BANK, 0x00);
if (ret < 0)
return ret;
}
return 0;
}
/* Init sequence taken from the android driver */
static int da311_reset(struct i2c_client *client)
{
const struct {
u16 addr;
u8 mask;
u8 data;
} init_data[] = {
{ DA311_REG_TEMP_CFG_REG, 0xff, 0x08 },
{ DA311_REG_CTRL_REG5, 0xff, 0x80 },
{ DA311_REG_CTRL_REG4, 0x30, 0x00 },
{ DA311_REG_CTRL_REG1, 0xff, 0x6f },
{ DA311_REG_TEMP_CFG_REG, 0xff, 0x88 },
{ DA311_REG_LDO_REG, 0xff, 0x02 },
{ DA311_REG_OTP_TRIM_OSC, 0xff, 0x27 },
{ DA311_REG_LPF_ABSOLUTE, 0xff, 0x30 },
{ DA311_REG_TEMP_OFF1, 0xff, 0x3f },
{ DA311_REG_TEMP_OFF2, 0xff, 0xff },
{ DA311_REG_TEMP_OFF3, 0xff, 0x0f },
};
int i, ret;
/* Reset */
ret = da311_register_mask_write(client, DA311_REG_SOFT_RESET,
0xff, 0xaa);
if (ret < 0)
return ret;
for (i = 0; i < ARRAY_SIZE(init_data); i++) {
ret = da311_register_mask_write(client,
init_data[i].addr,
init_data[i].mask,
init_data[i].data);
if (ret < 0)
return ret;
}
return 0;
}
static int da311_enable(struct i2c_client *client, bool enable)
{
u8 data = enable ? 0x00 : 0x20;
return da311_register_mask_write(client, DA311_REG_TEMP_CFG_REG,
0x20, data);
}
static int da311_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct da311_data *data = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = i2c_smbus_read_word_data(data->client, chan->address);
if (ret < 0)
return ret;
/*
* Values are 12 bits, stored as 16 bits with the 4
* least significant bits always 0.
*/
*val = (short)ret >> 4;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
*val2 = da311_nscale;
return IIO_VAL_INT_PLUS_NANO;
default:
return -EINVAL;
}
}
static const struct iio_info da311_info = {
.driver_module = THIS_MODULE,
.read_raw = da311_read_raw,
};
static int da311_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct iio_dev *indio_dev;
struct da311_data *data;
ret = i2c_smbus_read_byte_data(client, DA311_REG_CHIP_ID);
if (ret != DA311_CHIP_ID)
return (ret < 0) ? ret : -ENODEV;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
data->client = client;
i2c_set_clientdata(client, indio_dev);
indio_dev->dev.parent = &client->dev;
indio_dev->info = &da311_info;
indio_dev->name = "da311";
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = da311_channels;
indio_dev->num_channels = ARRAY_SIZE(da311_channels);
ret = da311_reset(client);
if (ret < 0)
return ret;
ret = da311_enable(client, true);
if (ret < 0)
return ret;
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "device_register failed\n");
da311_enable(client, false);
}
return ret;
}
static int da311_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
iio_device_unregister(indio_dev);
return da311_enable(client, false);
}
#ifdef CONFIG_PM_SLEEP
static int da311_suspend(struct device *dev)
{
return da311_enable(to_i2c_client(dev), false);
}
static int da311_resume(struct device *dev)
{
return da311_enable(to_i2c_client(dev), true);
}
#endif
static SIMPLE_DEV_PM_OPS(da311_pm_ops, da311_suspend, da311_resume);
static const struct i2c_device_id da311_i2c_id[] = {
{"da311", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, da311_i2c_id);
static struct i2c_driver da311_driver = {
.driver = {
.name = "da311",
.pm = &da311_pm_ops,
},
.probe = da311_probe,
.remove = da311_remove,
.id_table = da311_i2c_id,
};
module_i2c_driver(da311_driver);
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_DESCRIPTION("MiraMEMS DA311 3-Axis Accelerometer driver");
MODULE_LICENSE("GPL v2");
drivers/iio/accel/dmard10.c 0 → 100644
View file @ 72cca7ba
/**
* IIO driver for the 3-axis accelerometer Domintech ARD10.
*
* Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
* Copyright (c) 2012 Domintech Technology Co., Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/byteorder/generic.h>
#define DMARD10_REG_ACTR 0x00
#define DMARD10_REG_AFEM 0x0c
#define DMARD10_REG_STADR 0x12
#define DMARD10_REG_STAINT 0x1c
#define DMARD10_REG_MISC2 0x1f
#define DMARD10_REG_PD 0x21
#define DMARD10_MODE_OFF 0x00
#define DMARD10_MODE_STANDBY 0x02
#define DMARD10_MODE_ACTIVE 0x06
#define DMARD10_MODE_READ_OTP 0x12
#define DMARD10_MODE_RESET_DATA_PATH 0x82
/* AFEN set 1, ATM[2:0]=b'000 (normal), EN_Z/Y/X/T=1 */
#define DMARD10_VALUE_AFEM_AFEN_NORMAL 0x8f
/* ODR[3:0]=b'0111 (100Hz), CCK[3:0]=b'0100 (204.8kHZ) */
#define DMARD10_VALUE_CKSEL_ODR_100_204 0x74
/* INTC[6:5]=b'00 */
#define DMARD10_VALUE_INTC 0x00
/* TAP1/TAP2 Average 2 */
#define DMARD10_VALUE_TAPNS_AVE_2 0x11
#define DMARD10_VALUE_STADR 0x55
#define DMARD10_VALUE_STAINT 0xaa
#define DMARD10_VALUE_MISC2_OSCA_EN 0x08
#define DMARD10_VALUE_PD_RST 0x52
/* Offsets into the buffer read in dmard10_read_raw() */
#define DMARD10_X_OFFSET 1
#define DMARD10_Y_OFFSET 2
#define DMARD10_Z_OFFSET 3
/*
* a value of + or -128 corresponds to + or - 1G
* scale = 9.81 / 128 = 0.076640625
*/
static const int dmard10_nscale = 76640625;
#define DMARD10_CHANNEL(reg, axis) { \
.type = IIO_ACCEL, \
.address = reg, \
.modified = 1, \
.channel2 = IIO_MOD_##axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
}
static const struct iio_chan_spec dmard10_channels[] = {
DMARD10_CHANNEL(DMARD10_X_OFFSET, X),
DMARD10_CHANNEL(DMARD10_Y_OFFSET, Y),
DMARD10_CHANNEL(DMARD10_Z_OFFSET, Z),
};
struct dmard10_data {
struct i2c_client *client;
};
/* Init sequence taken from the android driver */
static int dmard10_reset(struct i2c_client *client)
{
unsigned char buffer[7];
int ret;
/* 1. Powerdown reset */
ret = i2c_smbus_write_byte_data(client, DMARD10_REG_PD,
DMARD10_VALUE_PD_RST);
if (ret < 0)
return ret;
/*
* 2. ACTR => Standby mode => Download OTP to parameter reg =>
* Standby mode => Reset data path => Standby mode
*/
buffer[0] = DMARD10_REG_ACTR;
buffer[1] = DMARD10_MODE_STANDBY;
buffer[2] = DMARD10_MODE_READ_OTP;
buffer[3] = DMARD10_MODE_STANDBY;
buffer[4] = DMARD10_MODE_RESET_DATA_PATH;
buffer[5] = DMARD10_MODE_STANDBY;
ret = i2c_master_send(client, buffer, 6);
if (ret < 0)
return ret;
/* 3. OSCA_EN = 1, TSTO = b'000 (INT1 = normal, TEST0 = normal) */
ret = i2c_smbus_write_byte_data(client, DMARD10_REG_MISC2,
DMARD10_VALUE_MISC2_OSCA_EN);
if (ret < 0)
return ret;
/* 4. AFEN = 1 (AFE will powerdown after ADC) */
buffer[0] = DMARD10_REG_AFEM;
buffer[1] = DMARD10_VALUE_AFEM_AFEN_NORMAL;
buffer[2] = DMARD10_VALUE_CKSEL_ODR_100_204;
buffer[3] = DMARD10_VALUE_INTC;
buffer[4] = DMARD10_VALUE_TAPNS_AVE_2;
buffer[5] = 0x00; /* DLYC, no delay timing */
buffer[6] = 0x07; /* INTD=1 push-pull, INTA=1 active high, AUTOT=1 */
ret = i2c_master_send(client, buffer, 7);
if (ret < 0)
return ret;
/* 5. Activation mode */
ret = i2c_smbus_write_byte_data(client, DMARD10_REG_ACTR,
DMARD10_MODE_ACTIVE);
if (ret < 0)
return ret;
return 0;
}
/* Shutdown sequence taken from the android driver */
static int dmard10_shutdown(struct i2c_client *client)
{
unsigned char buffer[3];
buffer[0] = DMARD10_REG_ACTR;
buffer[1] = DMARD10_MODE_STANDBY;
buffer[2] = DMARD10_MODE_OFF;
return i2c_master_send(client, buffer, 3);
}
static int dmard10_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct dmard10_data *data = iio_priv(indio_dev);
__le16 buf[4];
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
/*
* Read 8 bytes starting at the REG_STADR register, trying to
* read the individual X, Y, Z registers will always read 0.
*/
ret = i2c_smbus_read_i2c_block_data(data->client,
DMARD10_REG_STADR,
sizeof(buf), (u8 *)buf);
if (ret < 0)
return ret;
ret = le16_to_cpu(buf[chan->address]);
*val = sign_extend32(ret, 12);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
*val2 = dmard10_nscale;
return IIO_VAL_INT_PLUS_NANO;
default:
return -EINVAL;
}
}
static const struct iio_info dmard10_info = {
.driver_module = THIS_MODULE,
.read_raw = dmard10_read_raw,
};
static int dmard10_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct iio_dev *indio_dev;
struct dmard10_data *data;
/* These 2 registers have special POR reset values used for id */
ret = i2c_smbus_read_byte_data(client, DMARD10_REG_STADR);
if (ret != DMARD10_VALUE_STADR)
return (ret < 0) ? ret : -ENODEV;
ret = i2c_smbus_read_byte_data(client, DMARD10_REG_STAINT);
if (ret != DMARD10_VALUE_STAINT)
return (ret < 0) ? ret : -ENODEV;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev) {
dev_err(&client->dev, "iio allocation failed!\n");
return -ENOMEM;
}
data = iio_priv(indio_dev);
data->client = client;
i2c_set_clientdata(client, indio_dev);
indio_dev->dev.parent = &client->dev;
indio_dev->info = &dmard10_info;
indio_dev->name = "dmard10";
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = dmard10_channels;
indio_dev->num_channels = ARRAY_SIZE(dmard10_channels);
ret = dmard10_reset(client);
if (ret < 0)
return ret;
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "device_register failed\n");
dmard10_shutdown(client);
}
return ret;
}
static int dmard10_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
iio_device_unregister(indio_dev);
return dmard10_shutdown(client);
}
#ifdef CONFIG_PM_SLEEP
static int dmard10_suspend(struct device *dev)
{
return dmard10_shutdown(to_i2c_client(dev));
}
static int dmard10_resume(struct device *dev)
{
return dmard10_reset(to_i2c_client(dev));
}
#endif
static SIMPLE_DEV_PM_OPS(dmard10_pm_ops, dmard10_suspend, dmard10_resume);
static const struct i2c_device_id dmard10_i2c_id[] = {
{"dmard10", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, dmard10_i2c_id);
static struct i2c_driver dmard10_driver = {
.driver = {
.name = "dmard10",
.pm = &dmard10_pm_ops,
},
.probe = dmard10_probe,
.remove = dmard10_remove,
.id_table = dmard10_i2c_id,
};
module_i2c_driver(dmard10_driver);
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_DESCRIPTION("Domintech ARD10 3-Axis Accelerometer driver");
MODULE_LICENSE("GPL v2");
drivers/iio/accel/mma7660.c
View file @ 72cca7ba
......@@ -39,7 +39,7 @@
#define MMA7660_SCALE_AVAIL "0.467142857"
const int mma7660_nscale = 467142857;
static const int mma7660_nscale = 467142857;
#define MMA7660_CHANNEL(reg, axis) { \
.type = IIO_ACCEL, \
......
drivers/iio/accel/mma8452.c
View file @ 72cca7ba
......@@ -459,12 +459,14 @@ static int mma8452_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (iio_buffer_enabled(indio_dev))
return -EBUSY;
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
mutex_lock(&data->lock);
ret = mma8452_read(data, buffer);
mutex_unlock(&data->lock);
iio_device_release_direct_mode(indio_dev);
if (ret < 0)
return ret;
......@@ -664,37 +666,46 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
struct mma8452_data *data = iio_priv(indio_dev);
int i, ret;
if (iio_buffer_enabled(indio_dev))
return -EBUSY;
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
i = mma8452_get_samp_freq_index(data, val, val2);
if (i < 0)
return i;
if (i < 0) {
ret = i;
break;
}
data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK;
data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT;
return mma8452_change_config(data, MMA8452_CTRL_REG1,
data->ctrl_reg1);
ret = mma8452_change_config(data, MMA8452_CTRL_REG1,
data->ctrl_reg1);
break;
case IIO_CHAN_INFO_SCALE:
i = mma8452_get_scale_index(data, val, val2);
if (i < 0)
return i;
if (i < 0) {
ret = i;
break;
}
data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK;
data->data_cfg |= i;
return mma8452_change_config(data, MMA8452_DATA_CFG,
data->data_cfg);
ret = mma8452_change_config(data, MMA8452_DATA_CFG,
data->data_cfg);
break;
case IIO_CHAN_INFO_CALIBBIAS:
if (val < -128 || val > 127)
return -EINVAL;
if (val < -128 || val > 127) {
ret = -EINVAL;
break;
}
return mma8452_change_config(data,
MMA8452_OFF_X + chan->scan_index,
val);
ret = mma8452_change_config(data,
MMA8452_OFF_X + chan->scan_index,
val);
break;
case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
if (val == 0 && val2 == 0) {
......@@ -703,23 +714,30 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK;
ret = mma8452_set_hp_filter_frequency(data, val, val2);
if (ret < 0)
return ret;
break;
}
return mma8452_change_config(data, MMA8452_DATA_CFG,
ret = mma8452_change_config(data, MMA8452_DATA_CFG,
data->data_cfg);
break;
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
ret = mma8452_get_odr_index(data);
for (i = 0; i < ARRAY_SIZE(mma8452_os_ratio); i++) {
if (mma8452_os_ratio[i][ret] == val)
return mma8452_set_power_mode(data, i);
if (mma8452_os_ratio[i][ret] == val) {
ret = mma8452_set_power_mode(data, i);
break;
}
}
break;
default:
return -EINVAL;
ret = -EINVAL;
break;
}
iio_device_release_direct_mode(indio_dev);
return ret;
}
static int mma8452_read_thresh(struct iio_dev *indio_dev,
......@@ -1347,20 +1365,9 @@ static int mma8452_data_rdy_trigger_set_state(struct iio_trigger *trig,
return mma8452_change_config(data, MMA8452_CTRL_REG4, reg);
}
static int mma8452_validate_device(struct iio_trigger *trig,
struct iio_dev *indio_dev)
{
struct iio_dev *indio = iio_trigger_get_drvdata(trig);
if (indio != indio_dev)
return -EINVAL;
return 0;
}
static const struct iio_trigger_ops mma8452_trigger_ops = {
.set_trigger_state = mma8452_data_rdy_trigger_set_state,
.validate_device = mma8452_validate_device,
.validate_device = iio_trigger_validate_own_device,
.owner = THIS_MODULE,
};
......
drivers/iio/accel/st_accel.h
View file @ 72cca7ba
......@@ -30,6 +30,7 @@
#define LSM303AGR_ACCEL_DEV_NAME "lsm303agr_accel"
#define LIS2DH12_ACCEL_DEV_NAME "lis2dh12_accel"
#define LIS3L02DQ_ACCEL_DEV_NAME "lis3l02dq"
#define LNG2DM_ACCEL_DEV_NAME "lng2dm"
/**
* struct st_sensors_platform_data - default accel platform data
......
drivers/iio/accel/st_accel_core.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/accel/st_accel_i2c.c
View file @ 72cca7ba
......@@ -84,6 +84,10 @@ static const struct of_device_id st_accel_of_match[] = {
.compatible = "st,lis3l02dq",
.data = LIS3L02DQ_ACCEL_DEV_NAME,
},
{
.compatible = "st,lng2dm-accel",
.data = LNG2DM_ACCEL_DEV_NAME,
},
{},
};
MODULE_DEVICE_TABLE(of, st_accel_of_match);
......@@ -135,6 +139,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
{ LSM303AGR_ACCEL_DEV_NAME },
{ LIS2DH12_ACCEL_DEV_NAME },
{ LIS3L02DQ_ACCEL_DEV_NAME },
{ LNG2DM_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
......
drivers/iio/accel/st_accel_spi.c
View file @ 72cca7ba
......@@ -60,6 +60,7 @@ static const struct spi_device_id st_accel_id_table[] = {
{ LSM303AGR_ACCEL_DEV_NAME },
{ LIS2DH12_ACCEL_DEV_NAME },
{ LIS3L02DQ_ACCEL_DEV_NAME },
{ LNG2DM_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(spi, st_accel_id_table);
......
drivers/iio/adc/Kconfig
View file @ 72cca7ba
......@@ -58,6 +58,18 @@ config AD7476
To compile this driver as a module, choose M here: the
module will be called ad7476.
config AD7766
tristate "Analog Devices AD7766/AD7767 ADC driver"
depends on SPI_MASTER
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Analog Devices AD7766, AD7766-1,
AD7766-2, AD7767, AD7767-1, AD7767-2 SPI analog to digital converters.
To compile this driver as a module, choose M here: the module will be
called ad7766.
config AD7791
tristate "Analog Devices AD7791 ADC driver"
depends on SPI
......@@ -195,6 +207,16 @@ config DA9150_GPADC
To compile this driver as a module, choose M here: the module will be
called berlin2-adc.
config ENVELOPE_DETECTOR
tristate "Envelope detector using a DAC and a comparator"
depends on OF
help
Say yes here to build support for an envelope detector using a DAC
and a comparator.
To compile this driver as a module, choose M here: the module will be
called envelope-detector.
config EXYNOS_ADC
tristate "Exynos ADC driver support"
depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
......@@ -419,6 +441,28 @@ config ROCKCHIP_SARADC
To compile this driver as a module, choose M here: the
module will be called rockchip_saradc.
config STM32_ADC_CORE
tristate "STMicroelectronics STM32 adc core"
depends on ARCH_STM32 || COMPILE_TEST
depends on OF
depends on REGULATOR
help
Select this option to enable the core driver for STMicroelectronics
STM32 analog-to-digital converter (ADC).
This driver can also be built as a module. If so, the module
will be called stm32-adc-core.
config STM32_ADC
tristate "STMicroelectronics STM32 adc"
depends on STM32_ADC_CORE
help
Say yes here to build support for STMicroelectronics stm32 Analog
to Digital Converter (ADC).
This driver can also be built as a module. If so, the module
will be called stm32-adc.
config STX104
tristate "Apex Embedded Systems STX104 driver"
depends on X86 && ISA_BUS_API
......@@ -449,6 +493,8 @@ config TI_ADC081C
config TI_ADC0832
tristate "Texas Instruments ADC0831/ADC0832/ADC0834/ADC0838"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for Texas Instruments ADC0831,
ADC0832, ADC0834, ADC0838 ADC chips.
......
drivers/iio/adc/Makefile
View file @ 72cca7ba
......@@ -9,6 +9,7 @@ obj-$(CONFIG_AD7291) += ad7291.o
obj-$(CONFIG_AD7298) += ad7298.o
obj-$(CONFIG_AD7923) += ad7923.o
obj-$(CONFIG_AD7476) += ad7476.o
obj-$(CONFIG_AD7766) += ad7766.o
obj-$(CONFIG_AD7791) += ad7791.o
obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
......@@ -20,6 +21,7 @@ obj-$(CONFIG_BCM_IPROC_ADC) += bcm_iproc_adc.o
obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
obj-$(CONFIG_ENVELOPE_DETECTOR) += envelope-detector.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
obj-$(CONFIG_FSL_MX25_ADC) += fsl-imx25-gcq.o
obj-$(CONFIG_HI8435) += hi8435.o
......@@ -41,6 +43,8 @@ obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
obj-$(CONFIG_STX104) += stx104.o
obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
obj-$(CONFIG_STM32_ADC) += stm32-adc.o
obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
obj-$(CONFIG_TI_ADC12138) += ti-adc12138.o
......
drivers/iio/adc/ad7766.c 0 → 100644
View file @ 72cca7ba
/*
* AD7766/AD7767 SPI ADC driver
*
* Copyright 2016 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
struct ad7766_chip_info {
unsigned int decimation_factor;
};
enum {
AD7766_SUPPLY_AVDD = 0,
AD7766_SUPPLY_DVDD = 1,
AD7766_SUPPLY_VREF = 2,
AD7766_NUM_SUPPLIES = 3
};
struct ad7766 {
const struct ad7766_chip_info *chip_info;
struct spi_device *spi;
struct clk *mclk;
struct gpio_desc *pd_gpio;
struct regulator_bulk_data reg[AD7766_NUM_SUPPLIES];
struct iio_trigger *trig;
struct spi_transfer xfer;
struct spi_message msg;
/*
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
* Make the buffer large enough for one 24 bit sample and one 64 bit
* aligned 64 bit timestamp.
*/
unsigned char data[ALIGN(3, sizeof(s64)) + sizeof(s64)]
____cacheline_aligned;
};
/*
* AD7766 and AD7767 variations are interface compatible, the main difference is
* analog performance. Both parts will use the same ID.
*/
enum ad7766_device_ids {
ID_AD7766,
ID_AD7766_1,
ID_AD7766_2,
};
static irqreturn_t ad7766_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct ad7766 *ad7766 = iio_priv(indio_dev);
int ret;
ret = spi_sync(ad7766->spi, &ad7766->msg);
if (ret < 0)
goto done;
iio_push_to_buffers_with_timestamp(indio_dev, ad7766->data,
pf->timestamp);
done:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static int ad7766_preenable(struct iio_dev *indio_dev)
{
struct ad7766 *ad7766 = iio_priv(indio_dev);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
if (ret < 0) {
dev_err(&ad7766->spi->dev, "Failed to enable supplies: %d\n",
ret);
return ret;
}
ret = clk_prepare_enable(ad7766->mclk);
if (ret < 0) {
dev_err(&ad7766->spi->dev, "Failed to enable MCLK: %d\n", ret);
regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
return ret;
}
if (ad7766->pd_gpio)
gpiod_set_value(ad7766->pd_gpio, 0);
return 0;
}
static int ad7766_postdisable(struct iio_dev *indio_dev)
{
struct ad7766 *ad7766 = iio_priv(indio_dev);
if (ad7766->pd_gpio)
gpiod_set_value(ad7766->pd_gpio, 1);
/*
* The PD pin is synchronous to the clock, so give it some time to
* notice the change before we disable the clock.
*/
msleep(20);
clk_disable_unprepare(ad7766->mclk);
regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
return 0;
}
static int ad7766_read_raw(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, int *val, int *val2, long info)
{
struct ad7766 *ad7766 = iio_priv(indio_dev);
struct regulator *vref = ad7766->reg[AD7766_SUPPLY_VREF].consumer;
int scale_uv;
switch (info) {
case IIO_CHAN_INFO_SCALE:
scale_uv = regulator_get_voltage(vref);
if (scale_uv < 0)
return scale_uv;
*val = scale_uv / 1000;
*val2 = chan->scan_type.realbits;
return IIO_VAL_FRACTIONAL_LOG2;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = clk_get_rate(ad7766->mclk) /
ad7766->chip_info->decimation_factor;
return IIO_VAL_INT;
}
return -EINVAL;
}
static const struct iio_chan_spec ad7766_channels[] = {
{
.type = IIO_VOLTAGE,
.indexed = 1,
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
.scan_type = {
.sign = 's',
.realbits = 24,
.storagebits = 32,
.endianness = IIO_BE,
},
},
IIO_CHAN_SOFT_TIMESTAMP(1),
};
static const struct ad7766_chip_info ad7766_chip_info[] = {
[ID_AD7766] = {
.decimation_factor = 8,
},
[ID_AD7766_1] = {
.decimation_factor = 16,
},
[ID_AD7766_2] = {
.decimation_factor = 32,
},
};
static const struct iio_buffer_setup_ops ad7766_buffer_setup_ops = {
.preenable = &ad7766_preenable,
.postenable = &iio_triggered_buffer_postenable,
.predisable = &iio_triggered_buffer_predisable,
.postdisable = &ad7766_postdisable,
};
static const struct iio_info ad7766_info = {
.driver_module = THIS_MODULE,
.read_raw = &ad7766_read_raw,
};
static irqreturn_t ad7766_irq(int irq, void *private)
{
iio_trigger_poll(private);
return IRQ_HANDLED;
}
static int ad7766_set_trigger_state(struct iio_trigger *trig, bool enable)
{
struct ad7766 *ad7766 = iio_trigger_get_drvdata(trig);
if (enable)
enable_irq(ad7766->spi->irq);
else
disable_irq(ad7766->spi->irq);
return 0;
}
static const struct iio_trigger_ops ad7766_trigger_ops = {
.owner = THIS_MODULE,
.set_trigger_state = ad7766_set_trigger_state,
.validate_device = iio_trigger_validate_own_device,
};
static int ad7766_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct iio_dev *indio_dev;
struct ad7766 *ad7766;
int ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ad7766));
if (!indio_dev)
return -ENOMEM;
ad7766 = iio_priv(indio_dev);
ad7766->chip_info = &ad7766_chip_info[id->driver_data];
ad7766->mclk = devm_clk_get(&spi->dev, "mclk");
if (IS_ERR(ad7766->mclk))
return PTR_ERR(ad7766->mclk);
ad7766->reg[AD7766_SUPPLY_AVDD].supply = "avdd";
ad7766->reg[AD7766_SUPPLY_DVDD].supply = "dvdd";
ad7766->reg[AD7766_SUPPLY_VREF].supply = "vref";
ret = devm_regulator_bulk_get(&spi->dev, ARRAY_SIZE(ad7766->reg),
ad7766->reg);
if (ret)
return ret;
ad7766->pd_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
GPIOD_OUT_HIGH);
if (IS_ERR(ad7766->pd_gpio))
return PTR_ERR(ad7766->pd_gpio);
indio_dev->dev.parent = &spi->dev;
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = ad7766_channels;
indio_dev->num_channels = ARRAY_SIZE(ad7766_channels);
indio_dev->info = &ad7766_info;
if (spi->irq > 0) {
ad7766->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
indio_dev->name, indio_dev->id);
if (!ad7766->trig)
return -ENOMEM;
ad7766->trig->ops = &ad7766_trigger_ops;
ad7766->trig->dev.parent = &spi->dev;
iio_trigger_set_drvdata(ad7766->trig, ad7766);
ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq,
IRQF_TRIGGER_FALLING, dev_name(&spi->dev),
ad7766->trig);
if (ret < 0)
return ret;
/*
* The device generates interrupts as long as it is powered up.
* Some platforms might not allow the option to power it down so
* disable the interrupt to avoid extra load on the system
*/
disable_irq(spi->irq);
ret = devm_iio_trigger_register(&spi->dev, ad7766->trig);
if (ret)
return ret;
}
spi_set_drvdata(spi, indio_dev);
ad7766->spi = spi;
/* First byte always 0 */
ad7766->xfer.rx_buf = &ad7766->data[1];
ad7766->xfer.len = 3;
spi_message_init(&ad7766->msg);
spi_message_add_tail(&ad7766->xfer, &ad7766->msg);
ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
&iio_pollfunc_store_time, &ad7766_trigger_handler,
&ad7766_buffer_setup_ops);
if (ret)
return ret;
ret = devm_iio_device_register(&spi->dev, indio_dev);
if (ret)
return ret;
return 0;
}
static const struct spi_device_id ad7766_id[] = {
{"ad7766", ID_AD7766},
{"ad7766-1", ID_AD7766_1},
{"ad7766-2", ID_AD7766_2},
{"ad7767", ID_AD7766},
{"ad7767-1", ID_AD7766_1},
{"ad7767-2", ID_AD7766_2},
{}
};
MODULE_DEVICE_TABLE(spi, ad7766_id);
static struct spi_driver ad7766_driver = {
.driver = {
.name = "ad7766",
},
.probe = ad7766_probe,
.id_table = ad7766_id,
};
module_spi_driver(ad7766_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("Analog Devices AD7766 and AD7767 ADCs driver support");
MODULE_LICENSE("GPL v2");
drivers/iio/adc/at91_adc.c
View file @ 72cca7ba
......@@ -30,6 +30,7 @@
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/pinctrl/consumer.h>
/* Registers */
#define AT91_ADC_CR 0x00 /* Control Register */
......@@ -1347,6 +1348,32 @@ static int at91_adc_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int at91_adc_suspend(struct device *dev)
{
struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev));
struct at91_adc_state *st = iio_priv(idev);
pinctrl_pm_select_sleep_state(dev);
clk_disable_unprepare(st->clk);
return 0;
}
static int at91_adc_resume(struct device *dev)
{
struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev));
struct at91_adc_state *st = iio_priv(idev);
clk_prepare_enable(st->clk);
pinctrl_pm_select_default_state(dev);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, at91_adc_resume);
static struct at91_adc_caps at91sam9260_caps = {
.calc_startup_ticks = calc_startup_ticks_9260,
.num_channels = 4,
......@@ -1441,6 +1468,7 @@ static struct platform_driver at91_adc_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = of_match_ptr(at91_adc_dt_ids),
.pm = &at91_adc_pm_ops,
},
};
......
drivers/iio/adc/envelope-detector.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/adc/max1027.c
View file @ 72cca7ba
......@@ -238,7 +238,9 @@ static int max1027_read_single_value(struct iio_dev *indio_dev,
/* Configure conversion register with the requested chan */
st->reg = MAX1027_CONV_REG | MAX1027_CHAN(chan->channel) |
MAX1027_NOSCAN | !!(chan->type == IIO_TEMP);
MAX1027_NOSCAN;
if (chan->type == IIO_TEMP)
st->reg |= MAX1027_TEMP;
ret = spi_write(st->spi, &st->reg, 1);
if (ret < 0) {
dev_err(&indio_dev->dev,
......@@ -360,17 +362,6 @@ static int max1027_set_trigger_state(struct iio_trigger *trig, bool state)
return 0;
}
static int max1027_validate_device(struct iio_trigger *trig,
struct iio_dev *indio_dev)
{
struct iio_dev *indio = iio_trigger_get_drvdata(trig);
if (indio != indio_dev)
return -EINVAL;
return 0;
}
static irqreturn_t max1027_trigger_handler(int irq, void *private)
{
struct iio_poll_func *pf = (struct iio_poll_func *)private;
......@@ -391,7 +382,7 @@ static irqreturn_t max1027_trigger_handler(int irq, void *private)
static const struct iio_trigger_ops max1027_trigger_ops = {
.owner = THIS_MODULE,
.validate_device = &max1027_validate_device,
.validate_device = &iio_trigger_validate_own_device,
.set_trigger_state = &max1027_set_trigger_state,
};
......
drivers/iio/adc/stm32-adc-core.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/adc/stm32-adc-core.h 0 → 100644
View file @ 72cca7ba
/*
* This file is part of STM32 ADC driver
*
* Copyright (C) 2016, STMicroelectronics - All Rights Reserved
* Author: Fabrice Gasnier <fabrice.gasnier@st.com>.
*
* License type: GPLv2
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __STM32_ADC_H
#define __STM32_ADC_H
/*
* STM32 - ADC global register map
* ________________________________________________________
* | Offset | Register |
* --------------------------------------------------------
* | 0x000 | Master ADC1 |
* --------------------------------------------------------
* | 0x100 | Slave ADC2 |
* --------------------------------------------------------
* | 0x200 | Slave ADC3 |
* --------------------------------------------------------
* | 0x300 | Master & Slave common regs |
* --------------------------------------------------------
*/
#define STM32_ADC_MAX_ADCS 3
#define STM32_ADCX_COMN_OFFSET 0x300
/**
* struct stm32_adc_common - stm32 ADC driver common data (for all instances)
* @base: control registers base cpu addr
* @vref_mv: vref voltage (mv)
*/
struct stm32_adc_common {
void __iomem *base;
int vref_mv;
};
#endif
drivers/iio/adc/stm32-adc.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/adc/ti-adc0832.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/adc/ti-adc161s626.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/adc/ti_am335x_adc.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/common/Kconfig
View file @ 72cca7ba
......@@ -2,6 +2,7 @@
# IIO common modules
#
source "drivers/iio/common/cros_ec_sensors/Kconfig"
source "drivers/iio/common/hid-sensors/Kconfig"
source "drivers/iio/common/ms_sensors/Kconfig"
source "drivers/iio/common/ssp_sensors/Kconfig"
......
drivers/iio/common/Makefile
View file @ 72cca7ba
......@@ -7,6 +7,7 @@
#
# When adding new entries keep the list in alphabetical order
obj-y += cros_ec_sensors/
obj-y += hid-sensors/
obj-y += ms_sensors/
obj-y += ssp_sensors/
......
drivers/iio/common/cros_ec_sensors/Kconfig 0 → 100644
View file @ 72cca7ba
#
# Chrome OS Embedded Controller managed sensors library
#
config IIO_CROS_EC_SENSORS_CORE
tristate "ChromeOS EC Sensors Core"
depends on SYSFS && MFD_CROS_EC
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Base module for the ChromeOS EC Sensors module.
Contains core functions used by other IIO CrosEC sensor
drivers.
Define common attributes and sysfs interrupt handler.
config IIO_CROS_EC_SENSORS
tristate "ChromeOS EC Contiguous Sensors"
depends on IIO_CROS_EC_SENSORS_CORE
help
Module to handle 3d contiguous sensors like
Accelerometers, Gyroscope and Magnetometer that are
presented by the ChromeOS EC Sensor hub.
Creates an IIO device for each functions.
drivers/iio/common/cros_ec_sensors/Makefile 0 → 100644
View file @ 72cca7ba
#
# Makefile for sensors seen through the ChromeOS EC sensor hub.
#
obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/common/hid-sensors/hid-sensor-attributes.c
View file @ 72cca7ba
......@@ -201,7 +201,7 @@ int hid_sensor_write_samp_freq_value(struct hid_sensor_common *st,
int ret;
if (val1 < 0 || val2 < 0)
ret = -EINVAL;
return -EINVAL;
value = val1 * pow_10(6) + val2;
if (value) {
......@@ -250,6 +250,9 @@ int hid_sensor_write_raw_hyst_value(struct hid_sensor_common *st,
s32 value;
int ret;
if (val1 < 0 || val2 < 0)
return -EINVAL;
value = convert_to_vtf_format(st->sensitivity.size,
st->sensitivity.unit_expo,
val1, val2);
......
drivers/iio/counter/104-quad-8.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/counter/Kconfig 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/counter/Makefile 0 → 100644
View file @ 72cca7ba
#
# Makefile for IIO counter devices
#
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o
drivers/iio/dac/Kconfig
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/dac/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/dac/ad5592r.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/dac/dpot-dac.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/dac/mcp4725.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/gyro/Kconfig
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/gyro/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/gyro/mpu3050-core.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/gyro/mpu3050-i2c.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/gyro/mpu3050.h 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/gyro/st_gyro_core.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/humidity/Kconfig
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/humidity/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/humidity/hdc100x.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/humidity/hts221.h 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/humidity/hts221_buffer.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/humidity/hts221_core.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/humidity/hts221_i2c.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/humidity/hts221_spi.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/humidity/si7020.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/imu/bmi160/bmi160_core.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/industrialio-buffer.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/industrialio-core.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/industrialio-trigger.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/inkern.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/light/Kconfig
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/light/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/light/ltr501.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/light/max44000.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/magnetometer/ak8974.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/magnetometer/ak8975.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/magnetometer/st_magn_core.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/potentiometer/mcp4531.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/potentiostat/Kconfig 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/potentiostat/Makefile 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/potentiostat/lmp91000.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/pressure/Kconfig
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/pressure/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/pressure/abp060mg.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/pressure/mpl3115.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/pressure/ms5611_core.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/pressure/st_pressure_core.c
View file @ 72cca7ba
This diff is collapsed.
drivers/iio/pressure/zpa2326.c
View file @ 72cca7ba
This diff is collapsed.
drivers/mfd/ti_am335x_tscadc.c
View file @ 72cca7ba
This diff is collapsed.
drivers/net/ethernet/alacritech/slicoss.c
View file @ 72cca7ba
This diff is collapsed.
drivers/platform/chrome/cros_ec_dev.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/Kconfig
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/android/TODO
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/android/ashmem.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/android/ion/ion.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/android/uapi/ion_test.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/comedi/comedi.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/comedi/comedidev.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/comedi/drivers/cb_pcidda.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/comedi/drivers/mite.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/comedi/drivers/ni_stc.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/comedi/drivers/ni_tio.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/comedi/drivers/pcl818.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/comedi/drivers/s626.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/dgnc/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/dgnc/dgnc_cls.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/dgnc/dgnc_cls.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/dgnc/dgnc_driver.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/dgnc/dgnc_driver.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/dgnc/dgnc_mgmt.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/dgnc/dgnc_neo.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/dgnc/dgnc_neo.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/dgnc/dgnc_sysfs.c deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/dgnc/dgnc_sysfs.h deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/dgnc/dgnc_tty.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/dgnc/dgnc_tty.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/dgnc/digi.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/emxx_udc/emxx_udc.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fbtft/fb_agm1264k-fl.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fbtft/fb_ili9325.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fbtft/fb_ili9481.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fbtft/fb_ili9486.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fbtft/fb_s6d02a1.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fbtft/fb_st7735r.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fbtft/fbtft-core.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fbtft/fbtft.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fbtft/fbtft_device.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fbtft/flexfb.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/Kconfig
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/dpbp.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/dpmcp-cmd.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/dpmcp.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/dpmcp.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/dpmng-cmd.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/dpmng.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/dprc-cmd.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/dprc-driver.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/dprc.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/fsl-mc-bus.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/fsl-mc-msi.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/fsl-mc-private.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/mc-io.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/bus/mc-sys.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/include/dpbp.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/include/dpmng.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/include/dprc.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/include/mc-bus.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/include/mc-cmd.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/include/mc-sys.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fsl-mc/include/mc.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/fwserial/fwserial.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/gdm724x/gdm_lte.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/gdm724x/gdm_tty.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/gdm724x/netlink_k.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/arche-apb-ctrl.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/arche-platform.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/audio_codec.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/audio_codec.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/audio_manager.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/audio_module.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/audio_topology.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/camera.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/es2.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/log.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/sdio.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/timesync.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/greybus/uart.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/gs_fpgaboot/gs_fpgaboot.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/i4l/act2000/act2000_isa.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/i4l/act2000/capi.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/i4l/act2000/module.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/i4l/icn/icn.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/i4l/icn/icn.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/i4l/pcbit/callbacks.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/i4l/pcbit/capi.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/i4l/pcbit/drv.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/i4l/pcbit/edss1.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/i4l/pcbit/layer2.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/TODO
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/accel/Kconfig
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/accel/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/accel/sca3000.h deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/iio/accel/sca3000_ring.c deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/iio/adc/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/adc/ad7192.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/adc/ad7280a.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/adc/ad7606.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/adc/ad7606_par.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/adc/ad7606_ring.c deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/iio/adc/ad7606_spi.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/adc/ad7780.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/adc/ad7816.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/addac/adt7316.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/cdc/ad7150.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/cdc/ad7152.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/cdc/ad7746.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/frequency/ad9832.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/frequency/ad9832.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/frequency/ad9834.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/light/Kconfig
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/light/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/meter/ade7758_core.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/iio/ring_hw.h deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/ks7010/ks7010_sdio.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/ks7010/ks7010_sdio.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/ks7010/ks_hostif.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/ks7010/ks_wlan.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/ks7010/ks_wlan_net.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/ks7010/michael_mic.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/ks7010/michael_mic.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lnet/libcfs/debug.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lnet/libcfs/fail.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lnet/libcfs/hash.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lnet/libcfs/module.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lnet/libcfs/prng.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lnet/lnet/api-ni.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lnet/lnet/lib-me.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lnet/lnet/lib-move.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lnet/lnet/router.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lnet/selftest/rpc.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lnet/selftest/rpc.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/include/lustre_nrs.h 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/include/lustre_nrs_fifo.h 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/include/lustre_swab.h 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/include/obd.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/include/seq_range.h 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/llite/dir.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/llite/file.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/llite/llite_close.c deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/lustre/lustre/llite/namei.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/llite/rw.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/llite/rw26.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/llite/vvp_req.c deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/lustre/lustre/llite/xattr.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/llite/xattr_security.c 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/lmv/lmv_obd.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/lov/lov_dev.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/lov/lov_ea.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/lov/lov_io.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/lov/lov_obd.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/mdc/mdc_lib.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/osc/osc_dev.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/osc/osc_io.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/ptlrpc/nrs.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/ptlrpc/pers.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/lustre/ptlrpc/sec.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/lustre/sysfs-fs-lustre
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/media/cxd2099/cxd2099.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/media/lirc/lirc_sasem.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/media/lirc/lirc_zilog.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/media/omap4iss/iss_csi2.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/media/s5p-cec/s5p_cec.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/media/st-cec/stih-cec.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/most/hdm-dim2/dim2_hdm.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/most/hdm-usb/hdm_usb.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/most/mostcore/core.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/netlogic/xlr_net.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/core/rtw_cmd.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/core/rtw_led.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/core/rtw_mlme.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/core/rtw_recv.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/core/rtw_xmit.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/hal/odm.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/hal/phy.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/hal/rf.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/hal/rf_cfg.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/hal/usb_halinit.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/include/odm.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/include/rtw_led.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/os_dep/os_intfs.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8188eu/os_dep/usb_intf.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8192e/dot11d.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8192e/rtl819x_BAProc.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8192e/rtl819x_HTProc.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8192e/rtl819x_TSProc.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8192e/rtllib_rx.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8192e/rtllib_softmac.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/osdep_service.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/rtl8712_hal.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/rtl8712_led.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/rtl871x_cmd.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/rtl871x_ioctl_set.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/rtl871x_mlme.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/rtl871x_mlme.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/rtl871x_pwrctrl.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/rtl871x_recv.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/rtl871x_security.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/rtl871x_xmit.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rtl8712/rtl871x_xmit.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/ms.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/ms.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/rtsx.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/rtsx.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/rtsx_card.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/rtsx_card.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/rtsx_chip.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/rtsx_chip.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/rtsx_scsi.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/rtsx_scsi.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/rtsx_sys.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/rtsx_transport.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/sd.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/sd.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/spi.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/xd.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/rts5208/xd.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/skein/skein_api.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/skein/threefish_block.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/slicoss/Kconfig deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/slicoss/Makefile deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/slicoss/README deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/slicoss/TODO deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/slicoss/slic.h deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/slicoss/slichw.h deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/slicoss/slicoss.c deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/sm750fb/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_chip.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_chip.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_display.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_display.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_dvi.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_help.c deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/sm750fb/ddk750_help.h deleted 100644 → 0
View file @ 5266e703
This diff is collapsed.
drivers/staging/sm750fb/ddk750_hwi2c.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_mode.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_power.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_power.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_sii164.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_swi2c.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/ddk750_swi2c.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/sm750.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/sm750.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/sm750_accel.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/sm750_accel.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/sm750_cursor.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/sm750_cursor.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/sm750fb/sm750_hw.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/TODO
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/main.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/selection.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/serialio.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/speakup_soft.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/speakup_spkout.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/speakup_txprt.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/spk_priv_keyinfo.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/spk_types.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/synth.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/thread.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/speakup/varhandlers.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/unisys/include/iochannel.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/unisys/include/visorbus.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vc04_services/Kconfig
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vc04_services/Makefile
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vc04_services/interface/vchi/TODO 0 → 100644
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vme/devices/vme_pio2.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vme/devices/vme_pio2_core.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vme/devices/vme_user.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/baseband.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/baseband.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/card.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/card.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/channel.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/channel.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/desc.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/device.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/device_cfg.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/device_main.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/dpc.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/dpc.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/key.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/key.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/mac.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/mac.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/power.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/power.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/rf.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/rf.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/rxtx.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/rxtx.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/srom.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/srom.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/tmacro.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6655/upc.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6656/baseband.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6656/card.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6656/mac.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6656/main_usb.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/vt6656/rf.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wilc1000/coreconfigurator.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wilc1000/host_interface.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wilc1000/host_interface.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wilc1000/linux_wlan.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wilc1000/wilc_debugfs.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wilc1000/wilc_sdio.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wilc1000/wilc_spi.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wilc1000/wilc_wlan.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/cfg80211.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/hfa384x.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/hfa384x_usb.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211conv.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211conv.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211hdr.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211ioctl.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211metadef.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211mgmt.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211msg.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211netdev.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211netdev.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211req.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211req.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/p80211wep.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/prism2fw.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/prism2mgmt.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/prism2mgmt.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/prism2mib.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/wlan-ng/prism2sta.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/xgifb/XGI_main.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/xgifb/XGI_main_26.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/xgifb/vb_init.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/xgifb/vb_setmode.c
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/xgifb/vb_table.h
View file @ 72cca7ba
This diff is collapsed.
drivers/staging/xgifb/vb_util.h
View file @ 72cca7ba
This diff is collapsed.
include/linux/iio/adc/ad_sigma_delta.h
View file @ 72cca7ba
This diff is collapsed.
include/linux/iio/consumer.h
View file @ 72cca7ba
This diff is collapsed.
include/linux/iio/dac/mcp4725.h
View file @ 72cca7ba
This diff is collapsed.
include/linux/iio/iio.h
View file @ 72cca7ba
This diff is collapsed.
include/linux/iio/sysfs.h
View file @ 72cca7ba
This diff is collapsed.
include/linux/iio/trigger.h
View file @ 72cca7ba
This diff is collapsed.
include/linux/iio/types.h
View file @ 72cca7ba
This diff is collapsed.
include/linux/mfd/cros_ec.h
View file @ 72cca7ba
This diff is collapsed.
include/linux/mfd/cros_ec_commands.h
View file @ 72cca7ba
This diff is collapsed.
include/linux/mfd/ti_am335x_tscadc.h
View file @ 72cca7ba
This diff is collapsed.
include/soc/bcm2835/raspberrypi-firmware.h
View file @ 72cca7ba
This diff is collapsed.
include/uapi/linux/iio/types.h
View file @ 72cca7ba
This diff is collapsed.
tools/iio/iio_generic_buffer.c
View file @ 72cca7ba
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7