Commit 72f4861e authored by Stephen Hemminger's avatar Stephen Hemminger Committed by Jeff Garzik

b44: packet offset is constant

The receive buffer offset is constant in this driver.
Signed-off-by: default avatarStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent f65a7177
......@@ -15,6 +15,7 @@
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/etherdevice.h>
#include <linux/pci.h>
#include <linux/delay.h>
......@@ -68,7 +69,8 @@
(BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP))
#define NEXT_TX(N) (((N) + 1) & (B44_TX_RING_SIZE - 1))
#define RX_PKT_BUF_SZ (1536 + bp->rx_offset + 64)
#define RX_PKT_OFFSET 30
#define RX_PKT_BUF_SZ (1536 + RX_PKT_OFFSET + 64)
/* minimum number of free TX descriptors required to wake up TX process */
#define B44_TX_WAKEUP_THRESH (B44_TX_RING_SIZE / 4)
......@@ -683,10 +685,9 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
}
skb->dev = bp->dev;
skb_reserve(skb, bp->rx_offset);
rh = (struct rx_header *) skb->data;
skb_reserve(skb, RX_PKT_OFFSET);
rh = (struct rx_header *)
(skb->data - bp->rx_offset);
rh->len = 0;
rh->flags = 0;
......@@ -696,13 +697,13 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
if (src_map != NULL)
src_map->skb = NULL;
ctrl = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - bp->rx_offset));
ctrl = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - RX_PKT_OFFSET));
if (dest_idx == (B44_RX_RING_SIZE - 1))
ctrl |= DESC_CTRL_EOT;
dp = &bp->rx_ring[dest_idx];
dp->ctrl = cpu_to_le32(ctrl);
dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset);
dp->addr = cpu_to_le32((u32) mapping + RX_PKT_OFFSET + bp->dma_offset);
if (bp->flags & B44_FLAG_RX_RING_HACK)
b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma,
......@@ -781,7 +782,7 @@ static int b44_rx(struct b44 *bp, int budget)
PCI_DMA_FROMDEVICE);
rh = (struct rx_header *) skb->data;
len = le16_to_cpu(rh->len);
if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) ||
if ((len > (RX_PKT_BUF_SZ - RX_PKT_OFFSET)) ||
(rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) {
drop_it:
b44_recycle_rx(bp, cons, bp->rx_prod);
......@@ -813,8 +814,8 @@ static int b44_rx(struct b44 *bp, int budget)
pci_unmap_single(bp->pdev, map,
skb_size, PCI_DMA_FROMDEVICE);
/* Leave out rx_header */
skb_put(skb, len+bp->rx_offset);
skb_pull(skb,bp->rx_offset);
skb_put(skb, len + RX_PKT_OFFSET);
skb_pull(skb, RX_PKT_OFFSET);
} else {
struct sk_buff *copy_skb;
......@@ -826,7 +827,7 @@ static int b44_rx(struct b44 *bp, int budget)
skb_reserve(copy_skb, 2);
skb_put(copy_skb, len);
/* DMA sync done above, copy just the actual packet */
skb_copy_from_linear_data_offset(skb, bp->rx_offset,
skb_copy_from_linear_data_offset(skb, RX_PKT_OFFSET,
copy_skb->data, len);
skb = copy_skb;
}
......@@ -1393,12 +1394,12 @@ static void b44_init_hw(struct b44 *bp, int reset_kind)
bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
if (reset_kind == B44_PARTIAL_RESET) {
bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
(bp->rx_offset << DMARX_CTRL_ROSHIFT)));
(RX_PKT_OFFSET << DMARX_CTRL_ROSHIFT)));
} else {
bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
(bp->rx_offset << DMARX_CTRL_ROSHIFT)));
(RX_PKT_OFFSET << DMARX_CTRL_ROSHIFT)));
bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
bw32(bp, B44_DMARX_PTR, bp->rx_pending);
......@@ -2090,11 +2091,6 @@ static int __devinit b44_get_invariants(struct b44 *bp)
bp->phy_addr = eeprom[90] & 0x1f;
/* With this, plus the rx_header prepended to the data by the
* hardware, we'll land the ethernet header on a 2-byte boundary.
*/
bp->rx_offset = 30;
bp->imask = IMASK_DEF;
bp->core_unit = ssb_core_unit(bp);
......
......@@ -443,8 +443,6 @@ struct b44 {
#define B44_FLAG_TX_RING_HACK 0x40000000
#define B44_FLAG_WOL_ENABLE 0x80000000
u32 rx_offset;
u32 msg_enable;
struct timer_list timer;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment