Commit 72f655e4 authored by Alexander Aring's avatar Alexander Aring Committed by Marcel Holtmann

ieee802154: introduce wpan_phy_supported

This patch introduce the wpan_phy_supported struct for wpan_phy. There
is currently no way to check if a transceiver can handle IEEE 802.15.4
complaint values. With this struct we can check before if the
transceiver supports these values before sending to driver layer.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Suggested-by: default avatarPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Acked-by: default avatarVarka Bhadram <varkabhadram@gmail.com>
Cc: Alan Ott <alan@signal11.us>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 32b23550
......@@ -1579,7 +1579,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
case 3:
chip = "at86rf231";
lp->data = &at86rf231_data;
lp->hw->phy->channels_supported[0] = 0x7FFF800;
lp->hw->phy->supported.channels[0] = 0x7FFF800;
lp->hw->phy->current_channel = 11;
lp->hw->phy->symbol_duration = 16;
break;
......@@ -1587,15 +1587,15 @@ at86rf230_detect_device(struct at86rf230_local *lp)
chip = "at86rf212";
lp->data = &at86rf212_data;
lp->hw->flags |= IEEE802154_HW_LBT;
lp->hw->phy->channels_supported[0] = 0x00007FF;
lp->hw->phy->channels_supported[2] = 0x00007FF;
lp->hw->phy->supported.channels[0] = 0x00007FF;
lp->hw->phy->supported.channels[2] = 0x00007FF;
lp->hw->phy->current_channel = 5;
lp->hw->phy->symbol_duration = 25;
break;
case 11:
chip = "at86rf233";
lp->data = &at86rf233_data;
lp->hw->phy->channels_supported[0] = 0x7FFF800;
lp->hw->phy->supported.channels[0] = 0x7FFF800;
lp->hw->phy->current_channel = 13;
lp->hw->phy->symbol_duration = 16;
break;
......
......@@ -653,7 +653,7 @@ static int cc2520_register(struct cc2520_private *priv)
ieee802154_random_extended_addr(&priv->hw->phy->perm_extended_addr);
/* We do support only 2.4 Ghz */
priv->hw->phy->channels_supported[0] = 0x7FFF800;
priv->hw->phy->supported.channels[0] = 0x7FFF800;
priv->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
IEEE802154_HW_AFILT;
......
......@@ -149,35 +149,35 @@ static int fakelb_add_one(struct device *dev, struct fakelb_priv *fake)
priv->hw = hw;
/* 868 MHz BPSK 802.15.4-2003 */
hw->phy->channels_supported[0] |= 1;
hw->phy->supported.channels[0] |= 1;
/* 915 MHz BPSK 802.15.4-2003 */
hw->phy->channels_supported[0] |= 0x7fe;
hw->phy->supported.channels[0] |= 0x7fe;
/* 2.4 GHz O-QPSK 802.15.4-2003 */
hw->phy->channels_supported[0] |= 0x7FFF800;
hw->phy->supported.channels[0] |= 0x7FFF800;
/* 868 MHz ASK 802.15.4-2006 */
hw->phy->channels_supported[1] |= 1;
hw->phy->supported.channels[1] |= 1;
/* 915 MHz ASK 802.15.4-2006 */
hw->phy->channels_supported[1] |= 0x7fe;
hw->phy->supported.channels[1] |= 0x7fe;
/* 868 MHz O-QPSK 802.15.4-2006 */
hw->phy->channels_supported[2] |= 1;
hw->phy->supported.channels[2] |= 1;
/* 915 MHz O-QPSK 802.15.4-2006 */
hw->phy->channels_supported[2] |= 0x7fe;
hw->phy->supported.channels[2] |= 0x7fe;
/* 2.4 GHz CSS 802.15.4a-2007 */
hw->phy->channels_supported[3] |= 0x3fff;
hw->phy->supported.channels[3] |= 0x3fff;
/* UWB Sub-gigahertz 802.15.4a-2007 */
hw->phy->channels_supported[4] |= 1;
hw->phy->supported.channels[4] |= 1;
/* UWB Low band 802.15.4a-2007 */
hw->phy->channels_supported[4] |= 0x1e;
hw->phy->supported.channels[4] |= 0x1e;
/* UWB High band 802.15.4a-2007 */
hw->phy->channels_supported[4] |= 0xffe0;
hw->phy->supported.channels[4] |= 0xffe0;
/* 750 MHz O-QPSK 802.15.4c-2009 */
hw->phy->channels_supported[5] |= 0xf;
hw->phy->supported.channels[5] |= 0xf;
/* 750 MHz MPSK 802.15.4c-2009 */
hw->phy->channels_supported[5] |= 0xf0;
hw->phy->supported.channels[5] |= 0xf0;
/* 950 MHz BPSK 802.15.4d-2009 */
hw->phy->channels_supported[6] |= 0x3ff;
hw->phy->supported.channels[6] |= 0x3ff;
/* 950 MHz GFSK 802.15.4d-2009 */
hw->phy->channels_supported[6] |= 0x3ffc00;
hw->phy->supported.channels[6] |= 0x3ffc00;
INIT_LIST_HEAD(&priv->list);
priv->fake = fake;
......
......@@ -750,7 +750,7 @@ static int mrf24j40_probe(struct spi_device *spi)
devrec->hw->priv = devrec;
devrec->hw->parent = &devrec->spi->dev;
devrec->hw->phy->channels_supported[0] = CHANNEL_MASK;
devrec->hw->phy->supported.channels[0] = CHANNEL_MASK;
devrec->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
IEEE802154_HW_AFILT;
......
......@@ -61,6 +61,10 @@ struct cfg802154_ops {
struct wpan_dev *wpan_dev, bool mode);
};
struct wpan_phy_supported {
u32 channels[IEEE802154_MAX_PAGE + 1];
};
struct wpan_phy_cca {
enum nl802154_cca_modes mode;
enum nl802154_cca_opts opt;
......@@ -84,7 +88,7 @@ struct wpan_phy {
*/
u8 current_channel;
u8 current_page;
u32 channels_supported[IEEE802154_MAX_PAGE + 1];
struct wpan_phy_supported supported;
/* current transmit_power in mBm */
s32 transmit_power;
struct wpan_phy_cca cca;
......
......@@ -56,8 +56,8 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 portid,
nla_put_u8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel))
goto nla_put_failure;
for (i = 0; i < 32; i++) {
if (phy->channels_supported[i])
buf[pages++] = phy->channels_supported[i] | (i << 27);
if (phy->supported.channels[i])
buf[pages++] = phy->supported.channels[i] | (i << 27);
}
if (pages &&
nla_put(msg, IEEE802154_ATTR_CHANNEL_PAGE_LIST,
......
......@@ -248,7 +248,7 @@ nl802154_send_wpan_phy_channels(struct cfg802154_registered_device *rdev,
for (page = 0; page <= IEEE802154_MAX_PAGE; page++) {
if (nla_put_u32(msg, NL802154_ATTR_SUPPORTED_CHANNEL,
rdev->wpan_phy.channels_supported[page]))
rdev->wpan_phy.supported.channels[page]))
return -ENOBUFS;
}
nla_nest_end(msg, nl_page);
......@@ -626,7 +626,7 @@ static int nl802154_set_channel(struct sk_buff *skb, struct genl_info *info)
/* check 802.15.4 constraints */
if (page > IEEE802154_MAX_PAGE || channel > IEEE802154_MAX_CHANNEL ||
!(rdev->wpan_phy.channels_supported[page] & BIT(channel)))
!(rdev->wpan_phy.supported.channels[page] & BIT(channel)))
return -EINVAL;
return rdev_set_channel(rdev, page, channel);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment