ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974

vreg_boost is Qualcomm platform specific and is also used in hammerhead
device.

Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-soc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts

@@ -257,23 +257,6 @@ l24 {
 			};
 		};
 	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-     };
 };
 
 &soc {
@@ -446,11 +429,6 @@ charger@1000 {
 		};
 
 		gpios@c000 {
-			boost_bypass_n_pin: boost-bypass {
-				pins = "gpio21";
-				function = "normal";
-			};
-
 			gpio_keys_pin_a: gpio-keys-active {
 				pins = "gpio2", "gpio3", "gpio4", "gpio5";
 				function = "normal";

arch/arm/boot/dts/qcom-msm8974.dtsi

@@ -2,6 +2,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "skeleton.dtsi"
 
 / {
@@ -728,6 +729,22 @@ pm8941-regulators {
 		};
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
 	vreg_vph_pwr: vreg-vph-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "vph-pwr";

arch/arm/boot/dts/qcom-pm8941.dtsi

@@ -88,6 +88,11 @@ pm8941_gpios: gpios@c000 {
 				     <0 0xe1 0 IRQ_TYPE_NONE>,
 				     <0 0xe2 0 IRQ_TYPE_NONE>,
 				     <0 0xe3 0 IRQ_TYPE_NONE>;
+
+			boost_bypass_n_pin: boost-bypass {
+				pins = "gpio21";
+				function = "normal";
+			};
 		};
 
 		pm8941_mpps: mpps@a000 {