ipg: Move the IC Plus driver

Move the IC Plus driver into drivers/net/ethernet/icplus/ and
make the necessary Kconfig and Makefile changes.

CC: <craig_rich@sundanceti.com>
CC: <sorbica@icplus.com.tw>
CC: <jesse@icplus.com.tw>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

MAINTAINERS

@@ -3443,7 +3443,7 @@ M:	Francois Romieu <romieu@fr.zoreil.com>
 M:	Sorbica Shieh <sorbica@icplus.com.tw>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ipg.*
+F:	drivers/net/ethernet/icplus/ipg.*
 
 IPATH DRIVER
 M:	Mike Marciniszyn <infinipath@qlogic.com>

drivers/net/Kconfig

@@ -522,16 +522,6 @@ menuconfig NETDEV_1000
 
 if NETDEV_1000
 
-config IP1000
-	tristate "IP1000 Gigabit Ethernet support"
-	depends on PCI && EXPERIMENTAL
-	select MII
-	---help---
-	  This driver supports IP1000 gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called ipg.  This is recommended.
-
 endif # NETDEV_1000
 
 #

drivers/net/Makefile

@@ -5,7 +5,6 @@
 obj-$(CONFIG_MII) += mii.o
 obj-$(CONFIG_MDIO) += mdio.o
 obj-$(CONFIG_PHYLIB) += phy/
-obj-$(CONFIG_IP1000) += ipg.o
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_VMXNET3) += vmxnet3/

drivers/net/ethernet/Kconfig

@@ -31,6 +31,7 @@ source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/xscale/Kconfig"
+source "drivers/net/ethernet/icplus/Kconfig"
 
 config JME
 	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"

drivers/net/ethernet/Makefile

@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
 obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
+obj-$(CONFIG_IP1000) += icplus/
 obj-$(CONFIG_JME) += jme.o
 obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/

drivers/net/ethernet/icplus/Kconfig

+#
+# IC Plus device configuration
+#
+
+config IP1000
+	tristate "IP1000 Gigabit Ethernet support"
+	depends on PCI && EXPERIMENTAL
+	select MII
+	---help---
+	  This driver supports IP1000 gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ipg.  This is recommended.

drivers/net/ethernet/icplus/Makefile

+#
+# Makefile for the IC Plus device drivers
+#
+
+obj-$(CONFIG_IP1000) += ipg.o