Commit 76067540 authored by Dong Aisheng's avatar Dong Aisheng Committed by Mark Brown

ASoC: mxs-saif: add record function

1. add different clkmux mode handling
SAIF can use two instances to implement full duplex (playback &
recording) and record saif may work on EXTMASTER mode which is
using other saif's BITCLK&LRCLK.

The clkmux mode could be set in pdata->init() in mach-specific code.
For generic saif driver, it only needs to know who is his master
and the master id is also provided in mach-specific code.

2. support playback and capture simutaneously however the sample
rates can not be different due to hw limitation.
Signed-off-by: default avatarDong Aisheng <b29396@freescale.com>
Acked-by: default avatarWolfram Sang <w.sang@pengutronix.de>
Acked-by: default avatarLiam Girdwood <lrg@ti.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 5d42940c
/*
* Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __SOUND_SAIF_H__
#define __SOUND_SAIF_H__
struct mxs_saif_platform_data {
int (*init) (void);
int (*get_master_id) (unsigned int saif_id);
};
#endif
......@@ -23,10 +23,12 @@
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/time.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/saif.h>
#include <mach/dma.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
......@@ -36,6 +38,24 @@
static struct mxs_saif *mxs_saif[2];
/*
* SAIF is a little different with other normal SOC DAIs on clock using.
*
* For MXS, two SAIF modules are instantiated on-chip.
* Each SAIF has a set of clock pins and can be operating in master
* mode simultaneously if they are connected to different off-chip codecs.
* Also, one of the two SAIFs can master or drive the clock pins while the
* other SAIF, in slave mode, receives clocking from the master SAIF.
* This also means that both SAIFs must operate at the same sample rate.
*
* We abstract this as each saif has a master, the master could be
* himself or other saifs. In the generic saif driver, saif does not need
* to know the different clkmux. Saif only needs to know who is his master
* and operating his master to generate the proper clock rate for him.
* The master id is provided in mach-specific layer according to different
* clkmux setting.
*/
static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq, int dir)
{
......@@ -51,6 +71,17 @@ static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
return 0;
}
/*
* Since SAIF may work on EXTMASTER mode, IOW, it's working BITCLK&LRCLK
* is provided by other SAIF, we provide a interface here to get its master
* from its master_id.
* Note that the master could be himself.
*/
static inline struct mxs_saif *mxs_saif_get_master(struct mxs_saif * saif)
{
return mxs_saif[saif->master_id];
}
/*
* Set SAIF clock and MCLK
*/
......@@ -60,8 +91,26 @@ static int mxs_saif_set_clk(struct mxs_saif *saif,
{
u32 scr;
int ret;
struct mxs_saif *master_saif;
scr = __raw_readl(saif->base + SAIF_CTRL);
dev_dbg(saif->dev, "mclk %d rate %d\n", mclk, rate);
/* Set master saif to generate proper clock */
master_saif = mxs_saif_get_master(saif);
if (!master_saif)
return -EINVAL;
dev_dbg(saif->dev, "master saif%d\n", master_saif->id);
/* Checking if can playback and capture simutaneously */
if (master_saif->ongoing && rate != master_saif->cur_rate) {
dev_err(saif->dev,
"can not change clock, master saif%d(rate %d) is ongoing\n",
master_saif->id, master_saif->cur_rate);
return -EINVAL;
}
scr = __raw_readl(master_saif->base + SAIF_CTRL);
scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE;
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
......@@ -75,27 +124,29 @@ static int mxs_saif_set_clk(struct mxs_saif *saif,
*
* If MCLK is not used, we just set saif clk to 512*fs.
*/
if (saif->mclk_in_use) {
if (master_saif->mclk_in_use) {
if (mclk % 32 == 0) {
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(saif->clk, 512 * rate);
ret = clk_set_rate(master_saif->clk, 512 * rate);
} else if (mclk % 48 == 0) {
scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(saif->clk, 384 * rate);
ret = clk_set_rate(master_saif->clk, 384 * rate);
} else {
/* SAIF MCLK should be either 32x or 48x */
return -EINVAL;
}
} else {
ret = clk_set_rate(saif->clk, 512 * rate);
ret = clk_set_rate(master_saif->clk, 512 * rate);
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
}
if (ret)
return ret;
if (!saif->mclk_in_use) {
__raw_writel(scr, saif->base + SAIF_CTRL);
master_saif->cur_rate = rate;
if (!master_saif->mclk_in_use) {
__raw_writel(scr, master_saif->base + SAIF_CTRL);
return 0;
}
......@@ -137,7 +188,7 @@ static int mxs_saif_set_clk(struct mxs_saif *saif,
return -EINVAL;
}
__raw_writel(scr, saif->base + SAIF_CTRL);
__raw_writel(scr, master_saif->base + SAIF_CTRL);
return 0;
}
......@@ -183,6 +234,7 @@ int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk,
struct mxs_saif *saif = mxs_saif[saif_id];
u32 stat;
int ret;
struct mxs_saif *master_saif;
if (!saif)
return -EINVAL;
......@@ -195,6 +247,12 @@ int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk,
__raw_writel(BM_SAIF_CTRL_CLKGATE,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
master_saif = mxs_saif_get_master(saif);
if (saif != master_saif) {
dev_err(saif->dev, "can not get mclk from a non-master saif\n");
return -EINVAL;
}
stat = __raw_readl(saif->base + SAIF_STAT);
if (stat & BM_SAIF_STAT_BUSY) {
dev_err(saif->dev, "error: busy\n");
......@@ -278,10 +336,17 @@ static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
/*
* Note: We simply just support master mode since SAIF TX can only
* work as master.
* Here the master is relative to codec side.
* Saif internally could be slave when working on EXTMASTER mode.
* We just hide this to machine driver.
*/
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
scr &= ~BM_SAIF_CTRL_SLAVE_MODE;
if (saif->id == saif->master_id)
scr &= ~BM_SAIF_CTRL_SLAVE_MODE;
else
scr |= BM_SAIF_CTRL_SLAVE_MODE;
__raw_writel(scr | scr0, saif->base + SAIF_CTRL);
break;
default:
......@@ -396,6 +461,12 @@ static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
struct mxs_saif *master_saif;
u32 delay;
master_saif = mxs_saif_get_master(saif);
if (!master_saif)
return -EINVAL;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
......@@ -403,10 +474,20 @@ static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd,
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
dev_dbg(cpu_dai->dev, "start\n");
clk_enable(saif->clk);
if (!saif->mclk_in_use)
clk_enable(master_saif->clk);
if (!master_saif->mclk_in_use)
__raw_writel(BM_SAIF_CTRL_RUN,
master_saif->base + SAIF_CTRL + MXS_SET_ADDR);
/*
* If the saif's master is not himself, we also need to enable
* itself clk for its internal basic logic to work.
*/
if (saif != master_saif) {
clk_enable(saif->clk);
__raw_writel(BM_SAIF_CTRL_RUN,
saif->base + SAIF_CTRL + MXS_SET_ADDR);
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/*
......@@ -422,20 +503,39 @@ static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd,
__raw_readl(saif->base + SAIF_DATA);
}
dev_dbg(cpu_dai->dev, "CTRL 0x%x STAT 0x%x\n",
master_saif->ongoing = 1;
dev_dbg(saif->dev, "CTRL 0x%x STAT 0x%x\n",
__raw_readl(saif->base + SAIF_CTRL),
__raw_readl(saif->base + SAIF_STAT));
dev_dbg(master_saif->dev, "CTRL 0x%x STAT 0x%x\n",
__raw_readl(master_saif->base + SAIF_CTRL),
__raw_readl(master_saif->base + SAIF_STAT));
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
dev_dbg(cpu_dai->dev, "stop\n");
clk_disable(saif->clk);
if (!saif->mclk_in_use)
/* wait a while for the current sample to complete */
delay = USEC_PER_SEC / master_saif->cur_rate;
if (!master_saif->mclk_in_use) {
__raw_writel(BM_SAIF_CTRL_RUN,
master_saif->base + SAIF_CTRL + MXS_CLR_ADDR);
udelay(delay);
}
clk_disable(master_saif->clk);
if (saif != master_saif) {
__raw_writel(BM_SAIF_CTRL_RUN,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
udelay(delay);
clk_disable(saif->clk);
}
master_saif->ongoing = 0;
break;
default:
......@@ -519,16 +619,33 @@ static int mxs_saif_probe(struct platform_device *pdev)
{
struct resource *res;
struct mxs_saif *saif;
struct mxs_saif_platform_data *pdata;
int ret = 0;
if (pdev->id >= ARRAY_SIZE(mxs_saif))
return -EINVAL;
pdata = pdev->dev.platform_data;
if (pdata && pdata->init) {
ret = pdata->init();
if (ret)
return ret;
}
saif = kzalloc(sizeof(*saif), GFP_KERNEL);
if (!saif)
return -ENOMEM;
mxs_saif[pdev->id] = saif;
saif->id = pdev->id;
saif->master_id = saif->id;
if (pdata && pdata->get_master_id) {
saif->master_id = pdata->get_master_id(saif->id);
if (saif->master_id < 0 ||
saif->master_id >= ARRAY_SIZE(mxs_saif))
return -EINVAL;
}
saif->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(saif->clk)) {
......
......@@ -118,6 +118,10 @@ struct mxs_saif {
void __iomem *base;
int irq;
struct mxs_pcm_dma_params dma_param;
unsigned int id;
unsigned int master_id;
unsigned int cur_rate;
unsigned int ongoing;
struct platform_device *soc_platform_pdev;
u32 fifo_underrun;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment