m68knommu: move the 528x platform code into the common ColdFire code directory

All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

arch/m68k/Makefile

@@ -115,7 +115,6 @@ core-$(CONFIG_M68000)		+= arch/m68k/platform/68328/
 core-$(CONFIG_M68EZ328)		+= arch/m68k/platform/68EZ328/
 core-$(CONFIG_M68VZ328)		+= arch/m68k/platform/68VZ328/
 core-$(CONFIG_COLDFIRE)		+= arch/m68k/platform/coldfire/
-core-$(CONFIG_M528x)		+= arch/m68k/platform/528x/
 core-$(CONFIG_M5307)		+= arch/m68k/platform/5307/
 core-$(CONFIG_M532x)		+= arch/m68k/platform/532x/
 core-$(CONFIG_M5407)		+= arch/m68k/platform/5407/

arch/m68k/platform/528x/Makefile

-#
-# Makefile for the linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o
-

arch/m68k/platform/coldfire/Makefile

@@ -22,7 +22,7 @@ obj-$(CONFIG_M523x)	+= m523x.o pit.o dma_timer.o intc-2.o reset.o
 obj-$(CONFIG_M5249)	+= m5249.o timers.o intc.o intc-5249.o reset.o
 obj-$(CONFIG_M527x)	+= m527x.o pit.o intc-2.o reset.o
 obj-$(CONFIG_M5272)	+= m5272.o intc-5272.o timers.o
-obj-$(CONFIG_M528x)	+= pit.o intc-2.o reset.o
+obj-$(CONFIG_M528x)	+= m528x.o pit.o intc-2.o reset.o
 obj-$(CONFIG_M5307)	+= timers.o intc.o reset.o
 obj-$(CONFIG_M532x)	+= timers.o intc-simr.o reset.o
 obj-$(CONFIG_M5407)	+= timers.o intc.o reset.o