Commit 76d50018 authored by Dave Martin's avatar Dave Martin Committed by Kevin Hilman

ARM: omap3: Remove hand-encoded SMC instructions

For various reasons, Linux now only officially supports being built
with tools which are new enough to understand the SMC instruction.

Replacing the hand-encoded instructions when the mnemonic also
allows for correct assembly in Thumb-2 (otherwise, the result is
random data in the middle of the code).

The Makefile already ensures that this file is built with a high
enough gcc -march= flag (armv7-a).
Signed-off-by: default avatarDave Martin <dave.martin@linaro.org>
Tested-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: default avatarJean Pihet <j-pihet@ti.com>
Signed-off-by: default avatarKevin Hilman <khilman@ti.com>
parent f96bdfa0
......@@ -133,7 +133,7 @@ ENTRY(save_secure_ram_context)
mov r6, #0xff
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
smc #1 @ call SMI monitor (smi #1)
nop
nop
nop
......@@ -408,7 +408,7 @@ skipl2dis:
adr r3, l2_inv_api_params @ r3 points to dummy parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
smc #1 @ call SMI monitor (smi #1)
/* Write to Aux control register to set some bits */
mov r0, #42 @ set service ID for PPA
mov r12, r0 @ copy secure Service ID in r12
......@@ -419,7 +419,7 @@ skipl2dis:
ldr r3, [r4, #0xBC] @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
smc #1 @ call SMI monitor (smi #1)
#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
/* Restore L2 aux control register */
......@@ -434,7 +434,7 @@ skipl2dis:
adds r3, r3, #8 @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
smc #1 @ call SMI monitor (smi #1)
#endif
b logic_l1_restore
......@@ -443,18 +443,18 @@ l2_inv_api_params:
l2_inv_gp:
/* Execute smi to invalidate L2 cache */
mov r12, #0x1 @ set up to invalidate L2
.word 0xE1600070 @ Call SMI monitor (smieq)
smc #0 @ Call SMI monitor (smieq)
/* Write to Aux control register to set some bits */
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#4]
mov r12, #0x3
.word 0xE1600070 @ Call SMI monitor (smieq)
smc #0 @ Call SMI monitor (smieq)
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#12]
mov r12, #0x2
.word 0xE1600070 @ Call SMI monitor (smieq)
smc #0 @ Call SMI monitor (smieq)
logic_l1_restore:
ldr r1, l2dis_3630
cmp r1, #0x1 @ Test if L2 re-enable needed on 3630
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment