Commit 7705f686 authored by Thomas Langer's avatar Thomas Langer Committed by Ralf Baechle

MIPS: lantiq: fix early printk

The code was using a 32bit write operations in the early_printk code. This
resulted in 3 zero bytes also being written to the serial port. This patch
changes the memory access to 8bit.
Signed-off-by: default avatarThomas Langer <thomas.langer@lantiq.com>
Signed-off-by: default avatarJohn Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3721/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent a8d096ef
......@@ -34,6 +34,12 @@
#define LTQ_ASC1_BASE_ADDR 0x1E100C00
#define LTQ_ASC_SIZE 0x400
/*
* during early_printk no ioremap is possible
* lets use KSEG1 instead
*/
#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
/* RCU - reset control unit */
#define LTQ_RCU_BASE_ADDR 0x1F203000
#define LTQ_RCU_SIZE 0x1000
......
......@@ -6,17 +6,16 @@
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/init.h>
#include <linux/cpu.h>
#include <lantiq.h>
#include <lantiq_soc.h>
/* no ioremap possible at this early stage, lets use KSEG1 instead */
#define LTQ_ASC_BASE KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
#define ASC_BUF 1024
#define LTQ_ASC_FSTAT ((u32 *)(LTQ_ASC_BASE + 0x0048))
#define LTQ_ASC_TBUF ((u32 *)(LTQ_ASC_BASE + 0x0020))
#define LTQ_ASC_FSTAT ((u32 *)(LTQ_EARLY_ASC + 0x0048))
#ifdef __BIG_ENDIAN
#define LTQ_ASC_TBUF ((u32 *)(LTQ_EARLY_ASC + 0x0020 + 3))
#else
#define LTQ_ASC_TBUF ((u32 *)(LTQ_EARLY_ASC + 0x0020))
#endif
#define TXMASK 0x3F00
#define TXOFFSET 8
......@@ -27,7 +26,7 @@ void prom_putchar(char c)
local_irq_save(flags);
do { } while ((ltq_r32(LTQ_ASC_FSTAT) & TXMASK) >> TXOFFSET);
if (c == '\n')
ltq_w32('\r', LTQ_ASC_TBUF);
ltq_w32(c, LTQ_ASC_TBUF);
ltq_w8('\r', LTQ_ASC_TBUF);
ltq_w8(c, LTQ_ASC_TBUF);
local_irq_restore(flags);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment