Commit 7709c33b authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Simon Horman

ARM: shmobile: r8a7779 dtsi: Improve and correct HSPI nodes

  - Add "renesas,hspi-r8a7779" compatible value,
  - Correct reference to parent interrupt controller
    (use "interrupt-parent" instead of "interrupt-controller"),
  - Add missing "#address-cells" and "#size-cells" properties, which are
    needed when populating the SPI buses.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@linux-m68k.org>
Tested-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent a34c50d5
...@@ -256,26 +256,32 @@ sdhi3: sd@ffe4f000 { ...@@ -256,26 +256,32 @@ sdhi3: sd@ffe4f000 {
}; };
hspi0: spi@fffc7000 { hspi0: spi@fffc7000 {
compatible = "renesas,hspi"; compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc7000 0x18>; reg = <0xfffc7000 0x18>;
interrupt-controller = <&gic>; interrupt-parent = <&gic>;
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled"; status = "disabled";
}; };
hspi1: spi@fffc8000 { hspi1: spi@fffc8000 {
compatible = "renesas,hspi"; compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc8000 0x18>; reg = <0xfffc8000 0x18>;
interrupt-controller = <&gic>; interrupt-parent = <&gic>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled"; status = "disabled";
}; };
hspi2: spi@fffc6000 { hspi2: spi@fffc6000 {
compatible = "renesas,hspi"; compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc6000 0x18>; reg = <0xfffc6000 0x18>;
interrupt-controller = <&gic>; interrupt-parent = <&gic>;
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled"; status = "disabled";
}; };
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment