Merge branch 'for-4.14/drivers' into for-next

Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt

@@ -6,7 +6,7 @@ Required properties:
 - clocks: This clock defines the base clock frequency of the PWM hardware
   system, the period and the duty_cycle of the PWM signal is a multiple of
   the base period.
-- #pwm-cells: Should be 2. See pwm.txt in this directory for a description of
+- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
   the cells format.
 
 Examples:
@@ -15,7 +15,7 @@ pwm@2020c000 {
 	compatible = "brcm,bcm2835-pwm";
 	reg = <0x2020c000 0x28>;
 	clocks = <&clk_pwm>;
-	#pwm-cells = <2>;
+	#pwm-cells = <3>;
 };
 
 clocks {

Documentation/devicetree/bindings/pwm/pwm-mediatek.txt

@@ -2,6 +2,8 @@ MediaTek PWM controller
 
 Required properties:
  - compatible: should be "mediatek,<name>-pwm":
+   - "mediatek,mt2712-pwm": found on mt2712 SoC.
+   - "mediatek,mt7622-pwm": found on mt7622 SoC.
    - "mediatek,mt7623-pwm": found on mt7623 SoC.
  - reg: physical base address and length of the controller's registers.
  - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
@@ -10,7 +12,9 @@ Required properties:
  - clock-names: must contain the following:
    - "top": the top clock generator
    - "main": clock used by the PWM core
-   - "pwm1-5": the five per PWM clocks
+   - "pwm1-8": the eight per PWM clocks for mt2712
+   - "pwm1-6": the six per PWM clocks for mt7622
+   - "pwm1-5": the five per PWM clocks for mt7623
  - pinctrl-names: Must contain a "default" entry.
  - pinctrl-0: One property must exist for each entry in pinctrl-names.
    See pinctrl/pinctrl-bindings.txt for details of the property values.

Documentation/devicetree/bindings/pwm/pwm-rockchip.txt

@@ -3,10 +3,17 @@ Rockchip PWM controller
 Required properties:
  - compatible: should be "rockchip,<name>-pwm"
    "rockchip,rk2928-pwm": found on RK29XX,RK3066 and RK3188 SoCs
-   "rockchip,rk3288-pwm": found on RK3288 SoC
+   "rockchip,rk3288-pwm": found on RK3288 SOC
+   "rockchip,rv1108-pwm", "rockchip,rk3288-pwm": found on RV1108 SoC
    "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC
  - reg: physical base address and length of the controller's registers
- - clocks: phandle and clock specifier of the PWM reference clock
+ - clocks: See ../clock/clock-bindings.txt
+   - For older hardware (rk2928, rk3066, rk3188, rk3228, rk3288, rk3399):
+     - There is one clock that's used both to derive the functional clock
+       for the device and as the bus clock.
+   - For newer hardware (rk3328 and future socs): specified by name
+     - "pwm": This is used to derive the functional clock.
+     - "pclk": This is the APB bus clock.
  - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.txt in this directory
    for a description of the cell format.
 

Documentation/devicetree/bindings/pwm/pwm-tiecap.txt

@@ -6,6 +6,7 @@ Required properties:
   for am4372 - compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
   for da850  - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
   for dra746 - compatible = "ti,dra746-ecap", "ti,am3352-ecap";
+  for 66ak2g - compatible = "ti,k2g-ecap", "ti,am3352-ecap";
 - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
   the cells format. The PWM channel index ranges from 0 to 4. The only third
   cell flag supported by this binding is PWM_POLARITY_INVERTED.

Documentation/devicetree/bindings/pwm/pwm-zx.txt

+ZTE ZX PWM controller
+
+Required properties:
+ - compatible: Should be "zte,zx296718-pwm".
+ - reg: Physical base address and length of the controller's registers.
+ - clocks : The phandle and specifier referencing the controller's clocks.
+ - clock-names: "pclk" for PCLK, "wclk" for WCLK to the PWM controller.  The
+   PCLK is for register access, while WCLK is the reference clock for
+   calculating period and duty cycles.
+ - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
+   the cells format.
+
+Example:
+
+	pwm: pwm@1439000 {
+		compatible = "zte,zx296718-pwm";
+		reg = <0x1439000 0x1000>;
+		clocks = <&lsp1crm LSP1_PWM_PCLK>,
+			 <&lsp1crm LSP1_PWM_WCLK>;
+		clock-names = "pclk", "wclk";
+		#pwm-cells = <3>;
+	};

Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt

@@ -6,7 +6,6 @@ Required Properties:
     - "renesas,tpu-r8a73a4": for R8A77A4 (R-Mobile APE6) compatible PWM controller.
     - "renesas,tpu-r8a7740": for R8A7740 (R-Mobile A1) compatible PWM controller.
     - "renesas,tpu-r8a7790": for R8A7790 (R-Car H2) compatible PWM controller.
-    - "renesas,tpu-sh7372": for SH7372 (SH-Mobile AP4) compatible PWM controller.
     - "renesas,tpu": for generic R-Car TPU PWM controller.
 
   - reg: Base address and length of each memory resource used by the PWM

drivers/pwm/Kconfig

@@ -300,7 +300,7 @@ config PWM_MEDIATEK
 	  Generic PWM framework driver for Mediatek ARM SoC.
 
 	  To compile this driver as a module, choose M here: the module
-	  will be called pwm-mxs.
+	  will be called pwm-mediatek.
 
 config PWM_MXS
 	tristate "Freescale MXS PWM support"
@@ -446,7 +446,7 @@ config PWM_TEGRA
 
 config  PWM_TIECAP
 	tristate "ECAP PWM support"
-	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX
+	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE
 	help
 	  PWM driver support for the ECAP APWM controller found on AM33XX
 	  TI SOC
@@ -500,4 +500,13 @@ config PWM_VT8500
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-vt8500.
 
+config PWM_ZX
+	tristate "ZTE ZX PWM support"
+	depends on ARCH_ZX
+	help
+	  Generic PWM framework driver for ZTE ZX family SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-zx.
+
 endif

drivers/pwm/Makefile

@@ -49,3 +49,4 @@ obj-$(CONFIG_PWM_TIPWMSS)	+= pwm-tipwmss.o
 obj-$(CONFIG_PWM_TWL)		+= pwm-twl.o
 obj-$(CONFIG_PWM_TWL_LED)	+= pwm-twl-led.o
 obj-$(CONFIG_PWM_VT8500)	+= pwm-vt8500.o
+obj-$(CONFIG_PWM_ZX)		+= pwm-zx.o

drivers/pwm/pwm-bcm2835.c

@@ -167,6 +167,8 @@ static int bcm2835_pwm_probe(struct platform_device *pdev)
 	pc->chip.dev = &pdev->dev;
 	pc->chip.ops = &bcm2835_pwm_ops;
 	pc->chip.npwm = 2;
+	pc->chip.of_xlate = of_pwm_xlate_with_flags;
+	pc->chip.of_pwm_n_cells = 3;
 
 	platform_set_drvdata(pdev, pc);
 

drivers/pwm/pwm-hibvt.c

@@ -208,7 +208,7 @@ static int hibvt_pwm_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	pwm_chip->rstc = devm_reset_control_get(&pdev->dev, NULL);
+	pwm_chip->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(pwm_chip->rstc)) {
 		clk_disable_unprepare(pwm_chip->clk);
 		return PTR_ERR(pwm_chip->rstc);

drivers/pwm/pwm-mediatek.c

@@ -2,6 +2,7 @@
  * Mediatek Pulse Width Modulator driver
  *
  * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2017 Zhi Mao <zhi.mao@mediatek.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -29,6 +30,8 @@
 #define PWMDWIDTH		0x2c
 #define PWMTHRES		0x30
 
+#define PWM_CLK_DIV_MAX		7
+
 enum {
 	MTK_CLK_MAIN = 0,
 	MTK_CLK_TOP,
@@ -61,6 +64,42 @@ static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
 	return container_of(chip, struct mtk_pwm_chip, chip);
 }
 
+static int mtk_pwm_clk_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+	int ret;
+
+	ret = clk_prepare_enable(pc->clks[MTK_CLK_TOP]);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_prepare_enable(pc->clks[MTK_CLK_MAIN]);
+	if (ret < 0)
+		goto disable_clk_top;
+
+	ret = clk_prepare_enable(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	if (ret < 0)
+		goto disable_clk_main;
+
+	return 0;
+
+disable_clk_main:
+	clk_disable_unprepare(pc->clks[MTK_CLK_MAIN]);
+disable_clk_top:
+	clk_disable_unprepare(pc->clks[MTK_CLK_TOP]);
+
+	return ret;
+}
+
+static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
+
+	clk_disable_unprepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	clk_disable_unprepare(pc->clks[MTK_CLK_MAIN]);
+	clk_disable_unprepare(pc->clks[MTK_CLK_TOP]);
+}
+
 static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
 				unsigned int offset)
 {
@@ -80,6 +119,11 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
 	struct clk *clk = pc->clks[MTK_CLK_PWM1 + pwm->hwpwm];
 	u32 resolution, clkdiv = 0;
+	int ret;
+
+	ret = mtk_pwm_clk_enable(chip, pwm);
+	if (ret < 0)
+		return ret;
 
 	resolution = NSEC_PER_SEC / clk_get_rate(clk);
 
@@ -88,13 +132,18 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		clkdiv++;
 	}
 
-	if (clkdiv > 7)
+	if (clkdiv > PWM_CLK_DIV_MAX) {
+		mtk_pwm_clk_disable(chip, pwm);
+		dev_err(chip->dev, "period %d not supported\n", period_ns);
 		return -EINVAL;
+	}
 
-	mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
+	mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | clkdiv);
 	mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
 	mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
 
+	mtk_pwm_clk_disable(chip, pwm);
+
 	return 0;
 }
 
@@ -104,7 +153,7 @@ static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	u32 value;
 	int ret;
 
-	ret = clk_prepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	ret = mtk_pwm_clk_enable(chip, pwm);
 	if (ret < 0)
 		return ret;
 
@@ -124,7 +173,7 @@ static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	value &= ~BIT(pwm->hwpwm);
 	writel(value, pc->regs);
 
-	clk_unprepare(pc->clks[MTK_CLK_PWM1 + pwm->hwpwm]);
+	mtk_pwm_clk_disable(chip, pwm);
 }
 
 static const struct pwm_ops mtk_pwm_ops = {
@@ -156,14 +205,6 @@ static int mtk_pwm_probe(struct platform_device *pdev)
 			return PTR_ERR(pc->clks[i]);
 	}
 
-	ret = clk_prepare(pc->clks[MTK_CLK_TOP]);
-	if (ret < 0)
-		return ret;
-
-	ret = clk_prepare(pc->clks[MTK_CLK_MAIN]);
-	if (ret < 0)
-		goto disable_clk_top;
-
 	platform_set_drvdata(pdev, pc);
 
 	pc->chip.dev = &pdev->dev;
@@ -174,26 +215,15 @@ static int mtk_pwm_probe(struct platform_device *pdev)
 	ret = pwmchip_add(&pc->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
-		goto disable_clk_main;
+		return ret;
 	}
 
 	return 0;
-
-disable_clk_main:
-	clk_unprepare(pc->clks[MTK_CLK_MAIN]);
-disable_clk_top:
-	clk_unprepare(pc->clks[MTK_CLK_TOP]);
-
-	return ret;
 }
 
 static int mtk_pwm_remove(struct platform_device *pdev)
 {
 	struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
-	unsigned int i;
-
-	for (i = 0; i < pc->chip.npwm; i++)
-		pwm_disable(&pc->chip.pwms[i]);
 
 	return pwmchip_remove(&pc->chip);
 }

drivers/pwm/pwm-meson.c

@@ -441,7 +441,7 @@ static int meson_pwm_init_channels(struct meson_pwm *meson,
 	for (i = 0; i < meson->chip.npwm; i++) {
 		struct meson_pwm_channel *channel = &channels[i];
 
-		snprintf(name, sizeof(name), "%s#mux%u", np->full_name, i);
+		snprintf(name, sizeof(name), "%pOF#mux%u", np, i);
 
 		init.name = name;
 		init.ops = &clk_mux_ops;

drivers/pwm/pwm-pca9685.c

@@ -241,11 +241,11 @@ static inline int pca9685_pwm_gpio_probe(struct pca9685 *pca)
 }
 #endif
 
-static void pca9685_set_sleep_mode(struct pca9685 *pca, int sleep)
+static void pca9685_set_sleep_mode(struct pca9685 *pca, bool enable)
 {
 	regmap_update_bits(pca->regmap, PCA9685_MODE1,
-			   MODE1_SLEEP, sleep ? MODE1_SLEEP : 0);
-	if (!sleep) {
+			   MODE1_SLEEP, enable ? MODE1_SLEEP : 0);
+	if (!enable) {
 		/* Wait 500us for the oscillator to be back up */
 		udelay(500);
 	}
@@ -272,13 +272,13 @@ static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 			 * state is guaranteed active here.
 			 */
 			/* Put chip into sleep mode */
-			pca9685_set_sleep_mode(pca, 1);
+			pca9685_set_sleep_mode(pca, true);
 
 			/* Change the chip-wide output frequency */
 			regmap_write(pca->regmap, PCA9685_PRESCALE, prescale);
 
 			/* Wake the chip up */
-			pca9685_set_sleep_mode(pca, 0);
+			pca9685_set_sleep_mode(pca, false);
 
 			pca->period_ns = period_ns;
 		} else {
@@ -534,7 +534,7 @@ static int pca9685_pwm_runtime_suspend(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct pca9685 *pca = i2c_get_clientdata(client);
 
-	pca9685_set_sleep_mode(pca, 1);
+	pca9685_set_sleep_mode(pca, true);
 	return 0;
 }
 
@@ -543,7 +543,7 @@ static int pca9685_pwm_runtime_resume(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct pca9685 *pca = i2c_get_clientdata(client);
 
-	pca9685_set_sleep_mode(pca, 0);
+	pca9685_set_sleep_mode(pca, false);
 	return 0;
 }
 #endif

drivers/pwm/pwm-renesas-tpu.c

@@ -455,7 +455,6 @@ static const struct of_device_id tpu_of_table[] = {
 	{ .compatible = "renesas,tpu-r8a73a4", },
 	{ .compatible = "renesas,tpu-r8a7740", },
 	{ .compatible = "renesas,tpu-r8a7790", },
-	{ .compatible = "renesas,tpu-sh7372", },
 	{ .compatible = "renesas,tpu", },
 	{ },
 };

drivers/pwm/pwm-samsung.c

@@ -3,6 +3,7 @@
  * Copyright (c) 2008 Simtec Electronics
  *     Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
  * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
  *
  * PWM driver for Samsung SoCs
  *
@@ -74,6 +75,7 @@ struct samsung_pwm_channel {
  * @chip:		generic PWM chip
  * @variant:		local copy of hardware variant data
  * @inverter_mask:	inverter status for all channels - one bit per channel
+ * @disabled_mask:	disabled status for all channels - one bit per channel
  * @base:		base address of mapped PWM registers
  * @base_clk:		base clock used to drive the timers
  * @tclk0:		external clock 0 (can be ERR_PTR if not present)
@@ -83,6 +85,7 @@ struct samsung_pwm_chip {
 	struct pwm_chip chip;
 	struct samsung_pwm_variant variant;
 	u8 inverter_mask;
+	u8 disabled_mask;
 
 	void __iomem *base;
 	struct clk *base_clk;
@@ -257,6 +260,8 @@ static int pwm_samsung_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	tcon |= TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan);
 	writel(tcon, our_chip->base + REG_TCON);
 
+	our_chip->disabled_mask &= ~BIT(pwm->hwpwm);
+
 	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
 
 	return 0;
@@ -275,6 +280,8 @@ static void pwm_samsung_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	tcon &= ~TCON_AUTORELOAD(tcon_chan);
 	writel(tcon, our_chip->base + REG_TCON);
 
+	our_chip->disabled_mask |= BIT(pwm->hwpwm);
+
 	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
 }
 
@@ -297,8 +304,8 @@ static void pwm_samsung_manual_update(struct samsung_pwm_chip *chip,
 	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
 }
 
-static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
-			      int duty_ns, int period_ns)
+static int __pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
+				int duty_ns, int period_ns, bool force_period)
 {
 	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
 	struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm);
@@ -312,9 +319,6 @@ static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (period_ns > NSEC_PER_SEC)
 		return -ERANGE;
 
-	if (period_ns == chan->period_ns && duty_ns == chan->duty_ns)
-		return 0;
-
 	tcnt = readl(our_chip->base + REG_TCNTB(pwm->hwpwm));
 	oldtcmp = readl(our_chip->base + REG_TCMPB(pwm->hwpwm));
 
@@ -322,7 +326,7 @@ static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	++tcnt;
 
 	/* Check to see if we are changing the clock rate of the PWM. */
-	if (chan->period_ns != period_ns) {
+	if (chan->period_ns != period_ns || force_period) {
 		unsigned long tin_rate;
 		u32 period;
 
@@ -381,6 +385,12 @@ static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
+static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	return __pwm_samsung_config(chip, pwm, duty_ns, period_ns, false);
+}
+
 static void pwm_samsung_set_invert(struct samsung_pwm_chip *chip,
 				   unsigned int channel, bool invert)
 {
@@ -592,51 +602,41 @@ static int pwm_samsung_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int pwm_samsung_suspend(struct device *dev)
+static int pwm_samsung_resume(struct device *dev)
 {
-	struct samsung_pwm_chip *chip = dev_get_drvdata(dev);
+	struct samsung_pwm_chip *our_chip = dev_get_drvdata(dev);
+	struct pwm_chip *chip = &our_chip->chip;
 	unsigned int i;
 
-	/*
-	 * No one preserves these values during suspend so reset them.
-	 * Otherwise driver leaves PWM unconfigured if same values are
-	 * passed to pwm_config() next time.
-	 */
-	for (i = 0; i < SAMSUNG_PWM_NUM; ++i) {
-		struct pwm_device *pwm = &chip->chip.pwms[i];
+	for (i = 0; i < SAMSUNG_PWM_NUM; i++) {
+		struct pwm_device *pwm = &chip->pwms[i];
 		struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm);
 
 		if (!chan)
 			continue;
 
-		chan->period_ns = 0;
-		chan->duty_ns = 0;
-	}
-
-	return 0;
-}
+		if (our_chip->variant.output_mask & BIT(i))
+			pwm_samsung_set_invert(our_chip, i,
+					our_chip->inverter_mask & BIT(i));
 
-static int pwm_samsung_resume(struct device *dev)
-{
-	struct samsung_pwm_chip *chip = dev_get_drvdata(dev);
-	unsigned int chan;
+		if (chan->period_ns) {
+			__pwm_samsung_config(chip, pwm, chan->duty_ns,
+					     chan->period_ns, true);
+			/* needed to make PWM disable work on Odroid-XU3 */
+			pwm_samsung_manual_update(our_chip, pwm);
+		}
 
-	/*
-	 * Inverter setting must be preserved across suspend/resume
-	 * as nobody really seems to configure it more than once.
-	 */
-	for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan) {
-		if (chip->variant.output_mask & BIT(chan))
-			pwm_samsung_set_invert(chip, chan,
-					chip->inverter_mask & BIT(chan));
+		if (our_chip->disabled_mask & BIT(i))
+			pwm_samsung_disable(chip, pwm);
+		else
+			pwm_samsung_enable(chip, pwm);
 	}
 
 	return 0;
 }
 #endif
 
-static SIMPLE_DEV_PM_OPS(pwm_samsung_pm_ops, pwm_samsung_suspend,
-			 pwm_samsung_resume);
+static SIMPLE_DEV_PM_OPS(pwm_samsung_pm_ops, NULL, pwm_samsung_resume);
 
 static struct platform_driver pwm_samsung_driver = {
 	.driver		= {

drivers/pwm/pwm-tegra.c

@@ -218,7 +218,7 @@ static int tegra_pwm_probe(struct platform_device *pdev)
 	 */
 	pwm->clk_rate = clk_get_rate(pwm->clk);
 
-	pwm->rst = devm_reset_control_get(&pdev->dev, "pwm");
+	pwm->rst = devm_reset_control_get_exclusive(&pdev->dev, "pwm");
 	if (IS_ERR(pwm->rst)) {
 		ret = PTR_ERR(pwm->rst);
 		dev_err(&pdev->dev, "Reset control is not found: %d\n", ret);

drivers/pwm/pwm-tiecap.c

@@ -39,15 +39,15 @@
 #define ECCTL2_TSCTR_FREERUN	BIT(4)
 
 struct ecap_context {
-	u32	cap3;
-	u32	cap4;
-	u16	ecctl2;
+	u32 cap3;
+	u32 cap4;
+	u16 ecctl2;
 };
 
 struct ecap_pwm_chip {
-	struct pwm_chip	chip;
-	unsigned int	clk_rate;
-	void __iomem	*mmio_base;
+	struct pwm_chip chip;
+	unsigned int clk_rate;
+	void __iomem *mmio_base;
 	struct ecap_context ctx;
 };
 
@@ -64,9 +64,9 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		int duty_ns, int period_ns)
 {
 	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+	u32 period_cycles, duty_cycles;
 	unsigned long long c;
-	unsigned long period_cycles, duty_cycles;
-	unsigned int reg_val;
+	u16 value;
 
 	if (period_ns > NSEC_PER_SEC)
 		return -ERANGE;
@@ -74,7 +74,7 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	c = pc->clk_rate;
 	c = c * period_ns;
 	do_div(c, NSEC_PER_SEC);
-	period_cycles = (unsigned long)c;
+	period_cycles = (u32)c;
 
 	if (period_cycles < 1) {
 		period_cycles = 1;
@@ -83,17 +83,17 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		c = pc->clk_rate;
 		c = c * duty_ns;
 		do_div(c, NSEC_PER_SEC);
-		duty_cycles = (unsigned long)c;
+		duty_cycles = (u32)c;
 	}
 
 	pm_runtime_get_sync(pc->chip.dev);
 
-	reg_val = readw(pc->mmio_base + ECCTL2);
+	value = readw(pc->mmio_base + ECCTL2);
 
 	/* Configure APWM mode & disable sync option */
-	reg_val |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA;
+	value |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA;
 
-	writew(reg_val, pc->mmio_base + ECCTL2);
+	writew(value, pc->mmio_base + ECCTL2);
 
 	if (!pwm_is_enabled(pwm)) {
 		/* Update active registers if not running */
@@ -110,40 +110,45 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	}
 
 	if (!pwm_is_enabled(pwm)) {
-		reg_val = readw(pc->mmio_base + ECCTL2);
+		value = readw(pc->mmio_base + ECCTL2);
 		/* Disable APWM mode to put APWM output Low */
-		reg_val &= ~ECCTL2_APWM_MODE;
-		writew(reg_val, pc->mmio_base + ECCTL2);
+		value &= ~ECCTL2_APWM_MODE;
+		writew(value, pc->mmio_base + ECCTL2);
 	}
 
 	pm_runtime_put_sync(pc->chip.dev);
+
 	return 0;
 }
 
 static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
-		enum pwm_polarity polarity)
+				 enum pwm_polarity polarity)
 {
 	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
-	unsigned short reg_val;
+	u16 value;
 
 	pm_runtime_get_sync(pc->chip.dev);
-	reg_val = readw(pc->mmio_base + ECCTL2);
+
+	value = readw(pc->mmio_base + ECCTL2);
+
 	if (polarity == PWM_POLARITY_INVERSED)
 		/* Duty cycle defines LOW period of PWM */
-		reg_val |= ECCTL2_APWM_POL_LOW;
+		value |= ECCTL2_APWM_POL_LOW;
 	else
 		/* Duty cycle defines HIGH period of PWM */
-		reg_val &= ~ECCTL2_APWM_POL_LOW;
+		value &= ~ECCTL2_APWM_POL_LOW;
+
+	writew(value, pc->mmio_base + ECCTL2);
 
-	writew(reg_val, pc->mmio_base + ECCTL2);
 	pm_runtime_put_sync(pc->chip.dev);
+
 	return 0;
 }
 
 static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
-	unsigned int reg_val;
+	u16 value;
 
 	/* Leave clock enabled on enabling PWM */
 	pm_runtime_get_sync(pc->chip.dev);
@@ -152,24 +157,25 @@ static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	 * Enable 'Free run Time stamp counter mode' to start counter
 	 * and  'APWM mode' to enable APWM output
 	 */
-	reg_val = readw(pc->mmio_base + ECCTL2);
-	reg_val |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE;
-	writew(reg_val, pc->mmio_base + ECCTL2);
+	value = readw(pc->mmio_base + ECCTL2);
+	value |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE;
+	writew(value, pc->mmio_base + ECCTL2);
+
 	return 0;
 }
 
 static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
-	unsigned int reg_val;
+	u16 value;
 
 	/*
 	 * Disable 'Free run Time stamp counter mode' to stop counter
 	 * and 'APWM mode' to put APWM output to low
 	 */
-	reg_val = readw(pc->mmio_base + ECCTL2);
-	reg_val &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE);
-	writew(reg_val, pc->mmio_base + ECCTL2);
+	value = readw(pc->mmio_base + ECCTL2);
+	value &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE);
+	writew(value, pc->mmio_base + ECCTL2);
 
 	/* Disable clock on PWM disable */
 	pm_runtime_put_sync(pc->chip.dev);
@@ -184,12 +190,12 @@ static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 }
 
 static const struct pwm_ops ecap_pwm_ops = {
-	.free		= ecap_pwm_free,
-	.config		= ecap_pwm_config,
-	.set_polarity	= ecap_pwm_set_polarity,
-	.enable		= ecap_pwm_enable,
-	.disable	= ecap_pwm_disable,
-	.owner		= THIS_MODULE,
+	.free = ecap_pwm_free,
+	.config = ecap_pwm_config,
+	.set_polarity = ecap_pwm_set_polarity,
+	.enable = ecap_pwm_enable,
+	.disable = ecap_pwm_disable,
+	.owner = THIS_MODULE,
 };
 
 static const struct of_device_id ecap_of_match[] = {
@@ -202,10 +208,10 @@ MODULE_DEVICE_TABLE(of, ecap_of_match);
 static int ecap_pwm_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	int ret;
+	struct ecap_pwm_chip *pc;
 	struct resource *r;
 	struct clk *clk;
-	struct ecap_pwm_chip *pc;
+	int ret;
 
 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
 	if (!pc)
@@ -248,9 +254,9 @@ static int ecap_pwm_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	platform_set_drvdata(pdev, pc);
 	pm_runtime_enable(&pdev->dev);
 
-	platform_set_drvdata(pdev, pc);
 	return 0;
 }
 
@@ -259,6 +265,7 @@ static int ecap_pwm_remove(struct platform_device *pdev)
 	struct ecap_pwm_chip *pc = platform_get_drvdata(pdev);
 
 	pm_runtime_disable(&pdev->dev);
+
 	return pwmchip_remove(&pc->chip);
 }
 
@@ -311,14 +318,13 @@ static SIMPLE_DEV_PM_OPS(ecap_pwm_pm_ops, ecap_pwm_suspend, ecap_pwm_resume);
 
 static struct platform_driver ecap_pwm_driver = {
 	.driver = {
-		.name	= "ecap",
+		.name = "ecap",
 		.of_match_table = ecap_of_match,
-		.pm	= &ecap_pwm_pm_ops,
+		.pm = &ecap_pwm_pm_ops,
 	},
 	.probe = ecap_pwm_probe,
 	.remove = ecap_pwm_remove,
 };
-
 module_platform_driver(ecap_pwm_driver);
 
 MODULE_DESCRIPTION("ECAP PWM driver");

drivers/pwm/pwm-vt8500.c

@@ -241,6 +241,7 @@ static int vt8500_pwm_probe(struct platform_device *pdev)
 	ret = pwmchip_add(&chip->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add PWM chip\n");
+		clk_unprepare(chip->clk);
 		return ret;
 	}
 

drivers/pwm/pwm-zx.c

+/*
+ * Copyright (C) 2017 Sanechips Technology Co., Ltd.
+ * Copyright 2017 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define ZX_PWM_MODE		0x0
+#define ZX_PWM_CLKDIV_SHIFT	2
+#define ZX_PWM_CLKDIV_MASK	GENMASK(11, 2)
+#define ZX_PWM_CLKDIV(x)	(((x) << ZX_PWM_CLKDIV_SHIFT) & \
+					 ZX_PWM_CLKDIV_MASK)
+#define ZX_PWM_POLAR		BIT(1)
+#define ZX_PWM_EN		BIT(0)
+#define ZX_PWM_PERIOD		0x4
+#define ZX_PWM_DUTY		0x8
+
+#define ZX_PWM_CLKDIV_MAX	1023
+#define ZX_PWM_PERIOD_MAX	65535
+
+struct zx_pwm_chip {
+	struct pwm_chip chip;
+	struct clk *pclk;
+	struct clk *wclk;
+	void __iomem *base;
+};
+
+static inline struct zx_pwm_chip *to_zx_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct zx_pwm_chip, chip);
+}
+
+static inline u32 zx_pwm_readl(struct zx_pwm_chip *zpc, unsigned int hwpwm,
+			       unsigned int offset)
+{
+	return readl(zpc->base + (hwpwm + 1) * 0x10 + offset);
+}
+
+static inline void zx_pwm_writel(struct zx_pwm_chip *zpc, unsigned int hwpwm,
+				 unsigned int offset, u32 value)
+{
+	writel(value, zpc->base + (hwpwm + 1) * 0x10 + offset);
+}
+
+static void zx_pwm_set_mask(struct zx_pwm_chip *zpc, unsigned int hwpwm,
+			    unsigned int offset, u32 mask, u32 value)
+{
+	u32 data;
+
+	data = zx_pwm_readl(zpc, hwpwm, offset);
+	data &= ~mask;
+	data |= value & mask;
+	zx_pwm_writel(zpc, hwpwm, offset, data);
+}
+
+static void zx_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			     struct pwm_state *state)
+{
+	struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip);
+	unsigned long rate;
+	unsigned int div;
+	u32 value;
+	u64 tmp;
+
+	value = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_MODE);
+
+	if (value & ZX_PWM_POLAR)
+		state->polarity = PWM_POLARITY_NORMAL;
+	else
+		state->polarity = PWM_POLARITY_INVERSED;
+
+	if (value & ZX_PWM_EN)
+		state->enabled = true;
+	else
+		state->enabled = false;
+
+	div = (value & ZX_PWM_CLKDIV_MASK) >> ZX_PWM_CLKDIV_SHIFT;
+	rate = clk_get_rate(zpc->wclk);
+
+	tmp = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_PERIOD);
+	tmp *= div * NSEC_PER_SEC;
+	state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
+
+	tmp = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_DUTY);
+	tmp *= div * NSEC_PER_SEC;
+	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
+}
+
+static int zx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			 unsigned int duty_ns, unsigned int period_ns)
+{
+	struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip);
+	unsigned int period_cycles, duty_cycles;
+	unsigned long long c;
+	unsigned int div = 1;
+	unsigned long rate;
+
+	/* Find out the best divider */
+	rate = clk_get_rate(zpc->wclk);
+
+	while (1) {
+		c = rate / div;
+		c = c * period_ns;
+		do_div(c, NSEC_PER_SEC);
+
+		if (c < ZX_PWM_PERIOD_MAX)
+			break;
+
+		div++;
+
+		if (div > ZX_PWM_CLKDIV_MAX)
+			return -ERANGE;
+	}
+
+	/* Calculate duty cycles */
+	period_cycles = c;
+	c *= duty_ns;
+	do_div(c, period_ns);
+	duty_cycles = c;
+
+	/*
+	 * If the PWM is being enabled, we have to temporarily disable it
+	 * before configuring the registers.
+	 */
+	if (pwm_is_enabled(pwm))
+		zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_EN, 0);
+
+	/* Set up registers */
+	zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_CLKDIV_MASK,
+			ZX_PWM_CLKDIV(div));
+	zx_pwm_writel(zpc, pwm->hwpwm, ZX_PWM_PERIOD, period_cycles);
+	zx_pwm_writel(zpc, pwm->hwpwm, ZX_PWM_DUTY, duty_cycles);
+
+	/* Re-enable the PWM if needed */
+	if (pwm_is_enabled(pwm))
+		zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE,
+				ZX_PWM_EN, ZX_PWM_EN);
+
+	return 0;
+}
+
+static int zx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			struct pwm_state *state)
+{
+	struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip);
+	struct pwm_state cstate;
+	int ret;
+
+	pwm_get_state(pwm, &cstate);
+
+	if (state->polarity != cstate.polarity)
+		zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_POLAR,
+				(state->polarity == PWM_POLARITY_INVERSED) ?
+				 0 : ZX_PWM_POLAR);
+
+	if (state->period != cstate.period ||
+	    state->duty_cycle != cstate.duty_cycle) {
+		ret = zx_pwm_config(chip, pwm, state->duty_cycle,
+				    state->period);
+		if (ret)
+			return ret;
+	}
+
+	if (state->enabled != cstate.enabled) {
+		if (state->enabled) {
+			ret = clk_prepare_enable(zpc->wclk);
+			if (ret)
+				return ret;
+
+			zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE,
+					ZX_PWM_EN, ZX_PWM_EN);
+		} else {
+			zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE,
+					ZX_PWM_EN, 0);
+			clk_disable_unprepare(zpc->wclk);
+		}
+	}
+
+	return 0;
+}
+
+static const struct pwm_ops zx_pwm_ops = {
+	.apply = zx_pwm_apply,
+	.get_state = zx_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int zx_pwm_probe(struct platform_device *pdev)
+{
+	struct zx_pwm_chip *zpc;
+	struct resource *res;
+	unsigned int i;
+	int ret;
+
+	zpc = devm_kzalloc(&pdev->dev, sizeof(*zpc), GFP_KERNEL);
+	if (!zpc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	zpc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(zpc->base))
+		return PTR_ERR(zpc->base);
+
+	zpc->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(zpc->pclk))
+		return PTR_ERR(zpc->pclk);
+
+	zpc->wclk = devm_clk_get(&pdev->dev, "wclk");
+	if (IS_ERR(zpc->wclk))
+		return PTR_ERR(zpc->wclk);
+
+	ret = clk_prepare_enable(zpc->pclk);
+	if (ret)
+		return ret;
+
+	zpc->chip.dev = &pdev->dev;
+	zpc->chip.ops = &zx_pwm_ops;
+	zpc->chip.base = -1;
+	zpc->chip.npwm = 4;
+	zpc->chip.of_xlate = of_pwm_xlate_with_flags;
+	zpc->chip.of_pwm_n_cells = 3;
+
+	/*
+	 * PWM devices may be enabled by firmware, and let's disable all of
+	 * them initially to save power.
+	 */
+	for (i = 0; i < zpc->chip.npwm; i++)
+		zx_pwm_set_mask(zpc, i, ZX_PWM_MODE, ZX_PWM_EN, 0);
+
+	ret = pwmchip_add(&zpc->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, zpc);
+
+	return 0;
+}
+
+static int zx_pwm_remove(struct platform_device *pdev)
+{
+	struct zx_pwm_chip *zpc = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&zpc->chip);
+	clk_disable_unprepare(zpc->pclk);
+
+	return ret;
+}
+
+static const struct of_device_id zx_pwm_dt_ids[] = {
+	{ .compatible = "zte,zx296718-pwm", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, zx_pwm_dt_ids);
+
+static struct platform_driver zx_pwm_driver = {
+	.driver = {
+		.name = "zx-pwm",
+		.of_match_table = zx_pwm_dt_ids,
+	},
+	.probe = zx_pwm_probe,
+	.remove = zx_pwm_remove,
+};
+module_platform_driver(zx_pwm_driver);
+
+MODULE_ALIAS("platform:zx-pwm");
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("ZTE ZX PWM Driver");
+MODULE_LICENSE("GPL v2");