sky2: don't use AER routines

Using PCIE advanced error recovery stuff creates more user problems than it's worth.
The AER stuff depends on MMCONFIG and in many configurations it just doesn't work.
Plus it doesn't add any real functionality to the driver. The sky2
driver handles its own errors fine as is.

This reverts 555382cbSigned-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/sky2.c

@@ -31,7 +31,6 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/pci.h>
-#include <linux/aer.h>
 #include <linux/ip.h>
 #include <net/ip.h>
 #include <linux/tcp.h>
@@ -2432,26 +2431,15 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 
 	if (status & Y2_IS_PCI_EXP) {
 		/* PCI-Express uncorrectable Error occurred */
-		int aer = pci_find_aer_capability(hw->pdev);
 		u32 err;
 
-		if (aer) {
-			pci_read_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS,
-					      &err);
-			pci_cleanup_aer_uncorrect_error_status(pdev);
-		} else {
-			/* Either AER not configured, or not working
-			 * because of bad MMCONFIG, so just do recover
-			 * manually.
-			 */
-			err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
-			sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
-				     0xfffffffful);
-		}
-
+		err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+		sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+			     0xfffffffful);
 		if (net_ratelimit())
 			dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
 
+		sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
 	}
 
 	if (status & Y2_HWE_L1_MASK)
@@ -2806,24 +2794,13 @@ static void sky2_reset(struct sky2_hw *hw)
 
 	cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (cap) {
-		if (pci_find_aer_capability(pdev)) {
-			/* Check for advanced error reporting */
-			pci_cleanup_aer_uncorrect_error_status(pdev);
-			pci_cleanup_aer_correct_error_status(pdev);
-		} else {
-			dev_warn(&pdev->dev,
-				"PCI Express Advanced Error Reporting"
-				" not configured or MMCONFIG problem?\n");
-
-			sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
-				     0xfffffffful);
-		}
+		sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+			     0xfffffffful);
 
 		/* If error bit is stuck on ignore it */
 		if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
 			dev_info(&pdev->dev, "ignoring stuck error report bit\n");
-
-		else if (pci_enable_pcie_error_reporting(pdev))
+		else
 			hwe_mask |= Y2_IS_PCI_EXP;
 	}