Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6

Documentation/kernel-parameters.txt

@@ -1034,6 +1034,8 @@ running once the system is up.
 
 	nomce		[IA-32] Machine Check Exception
 
+	nomca		[IA-64] Disable machine check abort handling
+
 	noresidual	[PPC] Don't use residual data on PReP machines.
 
 	noresume	[SWSUSP] Disables resume and restores original swap

arch/ia64/configs/sn2_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec  2 10:33:48 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:06:38 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_CPUSETS=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -88,7 +90,7 @@ CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
@@ -126,6 +128,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -140,6 +143,7 @@ CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
 
 #
 # Firmware Drivers
@@ -166,6 +170,7 @@ CONFIG_ACPI=y
 CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
@@ -207,6 +212,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -247,6 +253,11 @@ CONFIG_IPV6=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -330,6 +341,7 @@ CONFIG_ATA_OVER_ETH=m
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -457,13 +469,7 @@ CONFIG_SCSI_SATA_VITESSE=y
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-CONFIG_SCSI_QLA22XX=y
-CONFIG_SCSI_QLA2300=y
-CONFIG_SCSI_QLA2322=y
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -545,6 +551,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
@@ -632,12 +639,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -686,8 +696,8 @@ CONFIG_AGP=y
 CONFIG_AGP_SGI_TIOCA=y
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=m
-# CONFIG_HPET is not set
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HPET is not set
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
@@ -702,6 +712,12 @@ CONFIG_MMTIMER=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -791,12 +807,14 @@ CONFIG_USB_UHCI_HCD=m
 # may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 
@@ -816,6 +834,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -902,6 +921,10 @@ CONFIG_INFINIBAND_SRP=m
 CONFIG_SGI_IOC4=y
 CONFIG_SGI_IOC3=y
 
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
@@ -931,6 +954,7 @@ CONFIG_XFS_QUOTA=y
 # CONFIG_XFS_SECURITY is not set
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -973,6 +997,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1041,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1111,19 +1137,21 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set

arch/ia64/configs/tiger_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec  2 16:06:32 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:49:18 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -88,7 +90,7 @@ CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 CONFIG_IA64_DIG=y
 # CONFIG_IA64_HP_ZX1 is not set
@@ -162,6 +164,7 @@ CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -203,6 +206,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -237,6 +241,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -326,6 +335,7 @@ CONFIG_BLK_DEV_INITRD=y
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -443,13 +453,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_QLOGIC_FC=y
 # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
 CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -572,6 +576,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -676,12 +681,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -694,6 +702,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -738,10 +747,10 @@ CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
 
 #
@@ -755,6 +764,12 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -765,6 +780,7 @@ CONFIG_MAX_RAW_DEVS=256
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -854,12 +870,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
@@ -873,6 +892,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -948,7 +968,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS)
 #
 
 #
@@ -980,6 +1000,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1021,6 +1042,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1090,6 +1112,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1157,18 +1180,20 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set

arch/ia64/kernel/fsys.S

@@ -878,8 +878,7 @@ fsyscall_table:
 	data8 0				// timer_delete
 	data8 0				// clock_settime
 	data8 fsys_clock_gettime	// clock_gettime
-	#define __NR_syscall_last	1255
 
-	.space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0
-
-	.org fsyscall_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
+	// fill in zeros for the remaining entries
+	.zero:
+	.space fsyscall_table + 8*NR_syscalls - .zero, 0

arch/ia64/kernel/ivt.S

@@ -1362,7 +1362,6 @@ END(debug_vector)
 // 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57)
 ENTRY(unaligned_access)
 	DBG_FAULT(30)
-	mov r16=cr.ipsr
 	mov r31=pr		// prepare to save predicates
 	;;
 	br.sptk.many dispatch_unaligned_handler

arch/ia64/kernel/unaligned.c

@@ -24,7 +24,7 @@
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 
-extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+extern void die_if_kernel(char *str, struct pt_regs *regs, long err);
 
 #undef DEBUG_UNALIGNED_TRAP
 
@@ -52,6 +52,15 @@ dump (const char *str, void *vp, size_t len)
 #define IA64_FIRST_ROTATING_FR	32
 #define SIGN_EXT9		0xffffffffffffff00ul
 
+/*
+ *  sysctl settable hook which tells the kernel whether to honor the
+ *  IA64_THREAD_UAC_NOPRINT prctl.  Because this is user settable, we want
+ *  to allow the super user to enable/disable this for security reasons
+ *  (i.e. don't allow attacker to fill up logs with unaligned accesses).
+ */
+int no_unaligned_warning;
+static int noprint_warning;
+
 /*
  * For M-unit:
  *
@@ -1324,8 +1333,9 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 		if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0)
 			goto force_sigbus;
 
-		if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT)
-		    && within_logging_rate_limit())
+		if (!no_unaligned_warning &&
+		    !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) &&
+		    within_logging_rate_limit())
 		{
 			char buf[200];	/* comm[] is at most 16 bytes... */
 			size_t len;
@@ -1340,7 +1350,22 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 			if (user_mode(regs))
 				tty_write_message(current->signal->tty, buf);
 			buf[len-1] = '\0';	/* drop '\r' */
-			printk(KERN_WARNING "%s", buf);	/* watch for command names containing %s */
+			/* watch for command names containing %s */
+			printk(KERN_WARNING "%s", buf);
+		} else {
+			if (no_unaligned_warning && !noprint_warning) {
+				noprint_warning = 1;
+				printk(KERN_WARNING "%s(%d) encountered an "
+				       "unaligned exception which required\n"
+				       "kernel assistance, which degrades "
+				       "the performance of the application.\n"
+				       "Unaligned exception warnings have "
+				       "been disabled by the system "
+				       "administrator\n"
+				       "echo 0 > /proc/sys/kernel/ignore-"
+				       "unaligned-usertrap to re-enable\n",
+				       current->comm, current->pid);
+			}
 		}
 	} else {
 		if (within_logging_rate_limit())

arch/ia64/pci/pci.c

@@ -579,7 +579,7 @@ pcibios_align_resource (void *data, struct resource *res,
 char * __init
 pcibios_setup (char *str)
 {
-	return NULL;
+	return str;
 }
 
 int

arch/ia64/sn/kernel/io_init.c

@@ -716,4 +716,3 @@ EXPORT_SYMBOL(sn_pci_unfixup_slot);
 EXPORT_SYMBOL(sn_pci_controller_fixup);
 EXPORT_SYMBOL(sn_bus_store_sysdata);
 EXPORT_SYMBOL(sn_bus_free_sysdata);
-EXPORT_SYMBOL(sn_pcidev_info_get);

drivers/sn/Kconfig

@@ -3,10 +3,11 @@
 #
 
 menu "SN Devices"
+	depends on SGI_SN
 
 config SGI_IOC4
 	tristate "SGI IOC4 Base IO support"
-	depends on (IA64_GENERIC || IA64_SGI_SN2) && MMTIMER
+	depends on MMTIMER
 	default m
 	---help---
 	This option enables basic support for the SGI IOC4-based Base IO
@@ -19,7 +20,6 @@ config SGI_IOC4
 
 config SGI_IOC3
 	tristate "SGI IOC3 Base IO support"
-	depends on (IA64_GENERIC || IA64_SGI_SN2)
 	default m
 	---help---
 	This option enables basic support for the SGI IOC3-based Base IO

include/asm-ia64/sn/arch.h

@@ -31,7 +31,8 @@
  * 	to ACPI3.0, this limit will be removed. The notion of "compact nodes"
  * 	should be deleted and TIOs should be included in MAX_NUMNODES.
  */
-#define MAX_COMPACT_NODES	512
+#define MAX_TIO_NODES		MAX_NUMNODES
+#define MAX_COMPACT_NODES	(MAX_NUMNODES + MAX_TIO_NODES)
 
 /*
  * Maximum number of nodes in all partitions and in all coherency domains.

include/linux/sysctl.h

@@ -147,6 +147,7 @@ enum
 	KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
 	KERN_SPIN_RETRY=70,	/* int: number of spinlock retries */
 	KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
+	KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
 };
 
 

kernel/sysctl.c

@@ -124,6 +124,10 @@ extern int sysctl_hz_timer;
 extern int acct_parm[];
 #endif
 
+#ifdef CONFIG_IA64
+extern int no_unaligned_warning;
+#endif
+
 static int parse_table(int __user *, int, void __user *, size_t __user *, void __user *, size_t,
 		       ctl_table *, void **);
 static int proc_doutsstring(ctl_table *table, int write, struct file *filp,
@@ -665,6 +669,16 @@ static ctl_table kern_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
 	},
+#endif
+#ifdef CONFIG_IA64
+	{
+		.ctl_name	= KERN_IA64_UNALIGNED,
+		.procname	= "ignore-unaligned-usertrap",
+		.data		= &no_unaligned_warning,
+		.maxlen		= sizeof (int),
+	 	.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
 #endif
 	{ .ctl_name = 0 }
 };