Commit 77f3381a authored by Hans de Goede's avatar Hans de Goede Committed by Wolfram Sang

i2c: i2c-designware-platdrv: Cleanup setting of the adapter number

i2c-designware-platdrv assumes that if the pdev has an apci-companion
it should use a dynamic adapter-nr and otherwise it will use pdev->id
as adapter-nr.

Before this commit the setting of the adapter.nr was somewhat convoluted,
in the acpi_companion case it was set from dw_i2c_acpi_configure, in the
non acpi_companion case it was set from dw_i2c_set_fifo_size based on
tx_fifo_depth not being set yet indicating that dw_i2c_acpi_configure was
not executed.

This cleans this up, directly setting the adapter-nr from
dw_i2c_plat_probe for both cases.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent bf263c35
......@@ -86,7 +86,6 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
struct i2c_timings *t = &dev->timings;
u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
dev->adapter.nr = -1;
dev->tx_fifo_depth = 32;
dev->rx_fifo_depth = 32;
......@@ -219,7 +218,7 @@ static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
dev->mode = DW_IC_SLAVE;
}
static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id)
static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev)
{
u32 param, tx_fifo_depth, rx_fifo_depth;
......@@ -233,7 +232,6 @@ static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id)
if (!dev->tx_fifo_depth) {
dev->tx_fifo_depth = tx_fifo_depth;
dev->rx_fifo_depth = rx_fifo_depth;
dev->adapter.nr = id;
} else if (tx_fifo_depth >= 2) {
dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth,
tx_fifo_depth);
......@@ -358,13 +356,17 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
div_u64(clk_khz * t->sda_hold_ns + 500000, 1000000);
}
dw_i2c_set_fifo_size(dev, pdev->id);
dw_i2c_set_fifo_size(dev);
adap = &dev->adapter;
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_DEPRECATED;
ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
adap->dev.of_node = pdev->dev.of_node;
if (has_acpi_companion(&pdev->dev))
adap->nr = -1;
else
adap->nr = pdev->id;
dev_pm_set_driver_flags(&pdev->dev,
DPM_FLAG_SMART_PREPARE |
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment