Commit 7828f096 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: addi_apci_2200: cleanup digital output subdevice

The board supported by this driver always has a digital output subdevice.
Remove the boardinfo for it and just open-code the relevant data in the
subdevice init.

Remove the SDF_GROUND and SDF_COMMON from the subdevice 'subdev_flags'.
These flags only have meaning for analog input/output subdevices. Also,
remove the SDF_READABLE flag, it is not required by output only subdevices.

Remove the subdevice 'len_chanlist' initialization. This variable only
has meaning for subdevices that support asynchronous commands.

Remove the subdevice 'io_bits' initialization. Digital output subdevices
don't use this variable.

Remove the subdevice function pointers that evaluate to NULL based on the
boardinfo data.

Move the apci2200_do_insn_bits() function from the hwdrv_apci2200.c file
into the main driver file.

For aesthetic reasons, rename the #define used for the register used to
read/write the digital outputs..
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 41542073
...@@ -46,12 +46,6 @@ You should also find the complete GPL in the COPYING file accompanying this sour ...@@ -46,12 +46,6 @@ You should also find the complete GPL in the COPYING file accompanying this sour
+----------+-----------+------------------------------------------------+ +----------+-----------+------------------------------------------------+
*/ */
/********* Definitions for APCI-2200 card *****/
/* DIGITAL INPUT-OUTPUT DEFINE */
#define APCI2200_DIGITAL_OP 4
/* TIMER COUNTER WATCHDOG DEFINES */ /* TIMER COUNTER WATCHDOG DEFINES */
#define APCI2200_WATCHDOG 0x08 #define APCI2200_WATCHDOG 0x08
...@@ -59,27 +53,6 @@ You should also find the complete GPL in the COPYING file accompanying this sour ...@@ -59,27 +53,6 @@ You should also find the complete GPL in the COPYING file accompanying this sour
#define APCI2200_WATCHDOG_RELOAD_VALUE 4 #define APCI2200_WATCHDOG_RELOAD_VALUE 4
#define APCI2200_WATCHDOG_STATUS 16 #define APCI2200_WATCHDOG_STATUS 16
static int apci2200_do_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int mask = data[0];
unsigned int bits = data[1];
s->state = inw(dev->iobase + APCI2200_DIGITAL_OP);
if (mask) {
s->state &= ~mask;
s->state |= (bits & mask);
outw(s->state, dev->iobase + APCI2200_DIGITAL_OP);
}
data[1] = s->state;
return insn->n;
}
/* /*
+----------------------------------------------------------------------------+ +----------------------------------------------------------------------------+
| Function Name : int i_APCI2200_ConfigWatchdog(struct comedi_device *dev, | Function Name : int i_APCI2200_ConfigWatchdog(struct comedi_device *dev,
......
...@@ -9,15 +9,14 @@ ...@@ -9,15 +9,14 @@
* I/O Register Map * I/O Register Map
*/ */
#define APCI2200_DI_REG 0x00 #define APCI2200_DI_REG 0x00
#define APCI2200_DO_REG 0x04
static const struct addi_board apci2200_boardtypes[] = { static const struct addi_board apci2200_boardtypes[] = {
{ {
.pc_DriverName = "apci2200", .pc_DriverName = "apci2200",
.i_VendorId = PCI_VENDOR_ID_ADDIDATA, .i_VendorId = PCI_VENDOR_ID_ADDIDATA,
.i_DeviceId = 0x1005, .i_DeviceId = 0x1005,
.i_NbrDoChannel = 16,
.i_Timer = 1, .i_Timer = 1,
.do_bits = apci2200_do_insn_bits,
.timer_config = i_APCI2200_ConfigWatchdog, .timer_config = i_APCI2200_ConfigWatchdog,
.timer_write = i_APCI2200_StartStopWriteWatchdog, .timer_write = i_APCI2200_StartStopWriteWatchdog,
.timer_read = i_APCI2200_ReadWatchdog, .timer_read = i_APCI2200_ReadWatchdog,
...@@ -34,9 +33,30 @@ static int apci2200_di_insn_bits(struct comedi_device *dev, ...@@ -34,9 +33,30 @@ static int apci2200_di_insn_bits(struct comedi_device *dev,
return insn->n; return insn->n;
} }
static int apci2200_do_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int mask = data[0];
unsigned int bits = data[1];
s->state = inw(dev->iobase + APCI2200_DO_REG);
if (mask) {
s->state &= ~mask;
s->state |= (bits & mask);
outw(s->state, dev->iobase + APCI2200_DO_REG);
}
data[1] = s->state;
return insn->n;
}
static int apci2200_reset(struct comedi_device *dev) static int apci2200_reset(struct comedi_device *dev)
{ {
outw(0x0, dev->iobase + APCI2200_DIGITAL_OP); outw(0x0, dev->iobase + APCI2200_DO_REG);
outw(0x0, dev->iobase + APCI2200_WATCHDOG + outw(0x0, dev->iobase + APCI2200_WATCHDOG +
APCI2200_WATCHDOG_ENABLEDISABLE); APCI2200_WATCHDOG_ENABLEDISABLE);
outw(0x0, dev->iobase + APCI2200_WATCHDOG + outw(0x0, dev->iobase + APCI2200_WATCHDOG +
...@@ -114,24 +134,12 @@ static int apci2200_auto_attach(struct comedi_device *dev, ...@@ -114,24 +134,12 @@ static int apci2200_auto_attach(struct comedi_device *dev,
/* Allocate and Initialise DO Subdevice Structures */ /* Allocate and Initialise DO Subdevice Structures */
s = &dev->subdevices[3]; s = &dev->subdevices[3];
if (this_board->i_NbrDoChannel) { s->type = COMEDI_SUBD_DO;
s->type = COMEDI_SUBD_DO; s->subdev_flags = SDF_WRITEABLE;
s->subdev_flags = s->n_chan = 16;
SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON; s->maxdata = 1;
s->n_chan = this_board->i_NbrDoChannel; s->range_table = &range_digital;
s->maxdata = this_board->i_DoMaxdata; s->insn_bits = apci2200_do_insn_bits;
s->len_chanlist = this_board->i_NbrDoChannel;
s->range_table = &range_digital;
s->io_bits = 0xf; /* all bits output */
/* insn_config - for digital output memory */
s->insn_config = this_board->do_config;
s->insn_write = this_board->do_write;
s->insn_bits = this_board->do_bits;
s->insn_read = this_board->do_read;
} else {
s->type = COMEDI_SUBD_UNUSED;
}
/* Allocate and Initialise Timer Subdevice Structures */ /* Allocate and Initialise Timer Subdevice Structures */
s = &dev->subdevices[4]; s = &dev->subdevices[4];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment