Merge tag 'spi-fix-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A small collection of driver specific fixes, the fsl-espi and bcm-qspi
  changes in particular have been causing breakage for users"

* tag 'spi-fix-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: bcm-qspi: Fix probe regression on iProc platforms
  spi: fsl-dspi: fix use-after-free in remove path
  spi: fsl-espi: Only process interrupts for expected events
  spi: bcm2835: Make polling_limit_us static
  spi: spi-fsl-dspi: use XSPI mode instead of DMA for DPAA2 SoCs

drivers/spi/spi-bcm-qspi.c

@@ -1295,7 +1295,7 @@ static const struct of_device_id bcm_qspi_of_match[] = {
 	},
 	{
 		.compatible = "brcm,spi-bcm-qspi",
-		.data = &bcm_qspi_rev_data,
+		.data = &bcm_qspi_no_rev_data,
 	},
 	{
 		.compatible = "brcm,spi-bcm7216-qspi",

drivers/spi/spi-bcm2835.c

@@ -75,7 +75,7 @@
 #define DRV_NAME	"spi-bcm2835"
 
 /* define polling limits */
-unsigned int polling_limit_us = 30;
+static unsigned int polling_limit_us = 30;
 module_param(polling_limit_us, uint, 0664);
 MODULE_PARM_DESC(polling_limit_us,
 		 "time in us to run a transfer in polling mode\n");

drivers/spi/spi-fsl-dspi.c

@@ -174,17 +174,17 @@ static const struct fsl_dspi_devtype_data devtype_data[] = {
 		.fifo_size		= 16,
 	},
 	[LS2080A] = {
-		.trans_mode		= DSPI_DMA_MODE,
+		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 4,
 	},
 	[LS2085A] = {
-		.trans_mode		= DSPI_DMA_MODE,
+		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 4,
 	},
 	[LX2160A] = {
-		.trans_mode		= DSPI_DMA_MODE,
+		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 4,
 	},
@@ -1273,11 +1273,14 @@ static int dspi_probe(struct platform_device *pdev)
 	void __iomem *base;
 	bool big_endian;
 
-	ctlr = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
+	dspi = devm_kzalloc(&pdev->dev, sizeof(*dspi), GFP_KERNEL);
+	if (!dspi)
+		return -ENOMEM;
+
+	ctlr = spi_alloc_master(&pdev->dev, 0);
 	if (!ctlr)
 		return -ENOMEM;
 
-	dspi = spi_controller_get_devdata(ctlr);
 	dspi->pdev = pdev;
 	dspi->ctlr = ctlr;
 
@@ -1414,7 +1417,7 @@ static int dspi_probe(struct platform_device *pdev)
 	if (dspi->devtype_data->trans_mode != DSPI_DMA_MODE)
 		ctlr->ptp_sts_supported = true;
 
-	platform_set_drvdata(pdev, ctlr);
+	platform_set_drvdata(pdev, dspi);
 
 	ret = spi_register_controller(ctlr);
 	if (ret != 0) {
@@ -1437,8 +1440,7 @@ static int dspi_probe(struct platform_device *pdev)
 
 static int dspi_remove(struct platform_device *pdev)
 {
-	struct spi_controller *ctlr = platform_get_drvdata(pdev);
-	struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
+	struct fsl_dspi *dspi = platform_get_drvdata(pdev);
 
 	/* Disconnect from the SPI framework */
 	spi_unregister_controller(dspi->ctlr);

drivers/spi/spi-fsl-espi.c

@@ -564,13 +564,14 @@ static void fsl_espi_cpu_irq(struct fsl_espi *espi, u32 events)
 static irqreturn_t fsl_espi_irq(s32 irq, void *context_data)
 {
 	struct fsl_espi *espi = context_data;
-	u32 events;
+	u32 events, mask;
 
 	spin_lock(&espi->lock);
 
 	/* Get interrupt events(tx/rx) */
 	events = fsl_espi_read_reg(espi, ESPI_SPIE);
-	if (!events) {
+	mask = fsl_espi_read_reg(espi, ESPI_SPIM);
+	if (!(events & mask)) {
 		spin_unlock(&espi->lock);
 		return IRQ_NONE;
 	}