Merge branch 'net-whitespace-cleanups'

Stephen Hemminger says:

====================
net whitespace cleanups

Ran script that I use to check for trailing whitespace and
blank lines at end of files across all files in net/ directory.
These are errors that checkpatch reports and git flags.

These are the resulting fixes broken up mostly by subsystem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

net/8021q/Makefile

@@ -9,4 +9,3 @@ obj-$(CONFIG_VLAN_8021Q)		+= 8021q.o
 8021q-$(CONFIG_VLAN_8021Q_GVRP)		+= vlan_gvrp.o
 8021q-$(CONFIG_VLAN_8021Q_MVRP)		+= vlan_mvrp.o
 8021q-$(CONFIG_PROC_FS)			+= vlanproc.o
-

net/Kconfig

@@ -12,7 +12,7 @@ menuconfig NET
 	  The reason is that some programs need kernel networking support even
 	  when running on a stand-alone machine that isn't connected to any
 	  other computer.
-	  
+
 	  If you are upgrading from an older kernel, you
 	  should consider updating your networking tools too because changes
 	  in the kernel and the tools often go hand in hand. The tools are

net/atm/mpoa_proc.c

@@ -307,9 +307,3 @@ void mpc_proc_clean(void)
 }
 
 #endif /* CONFIG_PROC_FS */
-
-
-
-
-
-

net/ax25/ax25_addr.c

@@ -304,4 +304,3 @@ void ax25_digi_invert(const ax25_digi *in, ax25_digi *out)
 		}
 	}
 }
-

net/ax25/ax25_ds_in.c

@@ -299,4 +299,3 @@ int ax25_ds_frame_in(ax25_cb *ax25, struct sk_buff *skb, int type)
 
 	return queued;
 }
-

net/ax25/ax25_ds_subr.c

@@ -205,4 +205,3 @@ void ax25_dama_off(ax25_cb *ax25)
 	ax25->condition &= ~AX25_COND_DAMA_MODE;
 	ax25_dev_dama_off(ax25->ax25_dev);
 }
-

net/ax25/ax25_ip.c

@@ -249,4 +249,3 @@ const struct header_ops ax25_header_ops = {
 
 EXPORT_SYMBOL(ax25_header_ops);
 EXPORT_SYMBOL(ax25_ip_xmit);
-

net/ax25/ax25_out.c

@@ -394,4 +394,3 @@ int ax25_check_iframes_acked(ax25_cb *ax25, unsigned short nr)
 	}
 	return 0;
 }
-

net/bpfilter/Kconfig

@@ -13,4 +13,3 @@ config BPFILTER_UMH
 	help
 	  This builds bpfilter kernel module with embedded user mode helper
 endif
-

net/core/neighbour.c

@@ -3274,4 +3274,3 @@ static int __init neigh_init(void)
 }
 
 subsys_initcall(neigh_init);
-

net/decnet/Kconfig

@@ -40,4 +40,3 @@ config DECNET_ROUTER
 	  to work.
 
 	  See <file:Documentation/networking/decnet.txt> for more information.
-

net/decnet/Makefile

@@ -8,4 +8,3 @@ decnet-$(CONFIG_DECNET_ROUTER) += dn_fib.o dn_rules.o dn_table.o
 decnet-y += sysctl_net_decnet.o
 
 obj-$(CONFIG_NETFILTER) += netfilter/
-

net/decnet/TODO

@@ -16,14 +16,14 @@ Steve's quick list of things that need finishing off:
 
  o Verify errors etc. against POSIX 1003.1g (draft)
 
- o Using send/recvmsg() to get at connect/disconnect data (POSIX 1003.1g) 
+ o Using send/recvmsg() to get at connect/disconnect data (POSIX 1003.1g)
    [maybe this should be done at socket level... the control data in the
     send/recvmsg() calls should simply be a vector of set/getsockopt()
     calls]
 
  o check MSG_CTRUNC is set where it should be.
 
- o Find all the commonality between DECnet and IPv4 routing code and extract 
+ o Find all the commonality between DECnet and IPv4 routing code and extract
    it into a small library of routines. [probably a project for 2.7.xx]
 
  o Add perfect socket hashing - an idea suggested by Paul Koning. Currently
@@ -38,4 +38,3 @@ Steve's quick list of things that need finishing off:
  o DECnet sendpages() function
 
  o AIO for DECnet
-

net/decnet/dn_fib.c

@@ -797,5 +797,3 @@ void __init dn_fib_init(void)
 	rtnl_register_module(THIS_MODULE, PF_DECnet, RTM_DELROUTE,
 			     dn_fib_rtm_delroute, NULL, 0);
 }
-
-

net/decnet/dn_nsp_in.c

@@ -912,4 +912,3 @@ int dn_nsp_backlog_rcv(struct sock *sk, struct sk_buff *skb)
 
 	return NET_RX_SUCCESS;
 }
-

net/decnet/dn_nsp_out.c

@@ -701,4 +701,3 @@ void dn_nsp_send_conninit(struct sock *sk, unsigned char msgflg)
 
 	dn_nsp_send(skb);
 }
-

net/decnet/dn_route.c

@@ -1925,4 +1925,3 @@ void __exit dn_route_cleanup(void)
 	remove_proc_entry("decnet_cache", init_net.proc_net);
 	dst_entries_destroy(&dn_dst_ops);
 }
-

net/decnet/dn_rules.c

@@ -256,5 +256,3 @@ void __exit dn_fib_rules_cleanup(void)
 	rtnl_unlock();
 	rcu_barrier();
 }
-
-

net/decnet/netfilter/Makefile

@@ -3,4 +3,3 @@
 #
 
 obj-$(CONFIG_DECNET_NF_GRABULATOR) += dn_rtmsg.o
-

net/decnet/netfilter/dn_rtmsg.c

@@ -158,4 +158,3 @@ MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_DNRTMSG);
 
 module_init(dn_rtmsg_init);
 module_exit(dn_rtmsg_fini);
-

net/dns_resolver/dns_key.c

@@ -320,4 +320,3 @@ static void __exit exit_dns_resolver(void)
 module_init(init_dns_resolver)
 module_exit(exit_dns_resolver)
 MODULE_LICENSE("GPL");
-

net/ieee802154/core.c

@@ -400,4 +400,3 @@ module_exit(wpan_phy_class_exit);
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("IEEE 802.15.4 configuration interface");
 MODULE_AUTHOR("Dmitry Eremin-Solenikov");
-

net/ieee802154/nl_policy.c

@@ -75,4 +75,3 @@ const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
 	[IEEE802154_ATTR_LLSEC_DEV_OVERRIDE] = { .type = NLA_U8, },
 	[IEEE802154_ATTR_LLSEC_DEV_KEY_MODE] = { .type = NLA_U8, },
 };
-

net/ipv4/Kconfig

@@ -430,7 +430,7 @@ config INET_DIAG
 	  Support for INET (TCP, DCCP, etc) socket monitoring interface used by
 	  native Linux tools such as ss. ss is included in iproute2, currently
 	  downloadable at:
-	  
+
 	    http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2
 
 	  If unsure, say Y.
@@ -600,7 +600,7 @@ config TCP_CONG_VENO
 	distinguishing to circumvent the difficult judgment of the packet loss
 	type. TCP Veno cuts down less congestion window in response to random
 	loss packets.
-	See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186> 
+	See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186>
 
 config TCP_CONG_YEAH
 	tristate "YeAH TCP"

net/ipv4/Makefile

@@ -43,7 +43,7 @@ obj-$(CONFIG_INET_XFRM_MODE_TRANSPORT) += xfrm4_mode_transport.o
 obj-$(CONFIG_INET_XFRM_MODE_TUNNEL) += xfrm4_mode_tunnel.o
 obj-$(CONFIG_IP_PNP) += ipconfig.o
 obj-$(CONFIG_NETFILTER)	+= netfilter.o netfilter/
-obj-$(CONFIG_INET_DIAG) += inet_diag.o 
+obj-$(CONFIG_INET_DIAG) += inet_diag.o
 obj-$(CONFIG_INET_TCP_DIAG) += tcp_diag.o
 obj-$(CONFIG_INET_UDP_DIAG) += udp_diag.o
 obj-$(CONFIG_INET_RAW_DIAG) += raw_diag.o

net/ipv4/bpfilter/Makefile

 obj-$(CONFIG_BPFILTER) += sockopt.o
-

net/ipv6/Kconfig

@@ -15,7 +15,7 @@ menuconfig IPV6
 	  Documentation/networking/ipv6.txt and read the HOWTO at
 	  <http://www.tldp.org/HOWTO/Linux+IPv6-HOWTO/>
 
-	  To compile this protocol support as a module, choose M here: the 
+	  To compile this protocol support as a module, choose M here: the
 	  module will be called ipv6.
 
 if IPV6

net/ipv6/ila/ila_common.c

@@ -153,4 +153,3 @@ void ila_update_ipv6_locator(struct sk_buff *skb, struct ila_params *p,
 	/* Now change destination address */
 	iaddr->loc = p->locator;
 }
-

net/ipv6/ila/ila_xlat.c

@@ -663,4 +663,3 @@ static int ila_xlat_addr(struct sk_buff *skb, bool sir2ila)
 
 	return 0;
 }
-

net/iucv/af_iucv.c

@@ -2515,4 +2515,3 @@ MODULE_DESCRIPTION("IUCV Sockets ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_NETPROTO(PF_IUCV);
-

net/kcm/Kconfig

@@ -8,4 +8,3 @@ config AF_KCM
 	  KCM (Kernel Connection Multiplexor) sockets provide a method
 	  for multiplexing messages of a message based application
 	  protocol over kernel connectons (e.g. TCP connections).
-

net/kcm/kcmsock.c

@@ -2104,4 +2104,3 @@ module_exit(kcm_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_NETPROTO(PF_KCM);
-

net/l2tp/l2tp_core.c

@@ -1795,4 +1795,3 @@ MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
 MODULE_DESCRIPTION("L2TP core");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(L2TP_DRV_VERSION);
-

net/llc/Kconfig

@@ -6,5 +6,5 @@ config LLC2
 	tristate "ANSI/IEEE 802.2 LLC type 2 Support"
 	select LLC
 	help
-	  This is a Logical Link Layer type 2, connection oriented support. 
+	  This is a Logical Link Layer type 2, connection oriented support.
 	  Select this if you want to have support for PF_LLC sockets.

net/llc/Makefile

@@ -4,7 +4,7 @@
 # Copyright (c) 1997 by Procom Technology,Inc.
 #		2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
 #
-# This program can be redistributed or modified under the terms of the 
+# This program can be redistributed or modified under the terms of the
 # GNU General Public License as published by the Free Software Foundation.
 # This program is distributed without any warranty or implied warranty
 # of merchantability or fitness for a particular purpose.

net/llc/llc_if.c

@@ -151,4 +151,3 @@ int llc_send_disc(struct sock *sk)
 	sock_put(sk);
 	return rc;
 }
-

net/mac80211/rc80211_minstrel.c

@@ -751,4 +751,3 @@ rc80211_minstrel_exit(void)
 {
 	ieee80211_rate_control_unregister(&mac80211_minstrel);
 }
-

net/mpls/mpls_iptunnel.c

@@ -224,7 +224,7 @@ static int mpls_fill_encap_info(struct sk_buff *skb,
 				struct lwtunnel_state *lwtstate)
 {
 	struct mpls_iptunnel_encap *tun_encap_info;
-	
+
 	tun_encap_info = mpls_lwtunnel_encap(lwtstate);
 
 	if (nla_put_labels(skb, MPLS_IPTUNNEL_DST, tun_encap_info->labels,

net/rds/Kconfig

@@ -24,4 +24,3 @@ config RDS_DEBUG
         bool "RDS debugging messages"
 	depends on RDS
         default n
-

net/rds/Makefile

@@ -15,4 +15,3 @@ rds_tcp-y :=		tcp.o tcp_connect.o tcp_listen.o tcp_recv.o \
 			tcp_send.o tcp_stats.o
 
 ccflags-$(CONFIG_RDS_DEBUG)	:=	-DRDS_DEBUG
-

net/rds/ib.c

@@ -568,4 +568,3 @@ int rds_ib_init(void)
 }
 
 MODULE_LICENSE("GPL");
-

net/rds/message.c

@@ -514,4 +514,3 @@ void rds_message_unmapped(struct rds_message *rm)
 	wake_up_interruptible(&rm->m_flush_wait);
 }
 EXPORT_SYMBOL_GPL(rds_message_unmapped);
-

net/rds/rdma_transport.c

@@ -281,4 +281,3 @@ module_exit(rds_rdma_exit);
 MODULE_AUTHOR("Oracle Corporation <rds-devel@oss.oracle.com>");
 MODULE_DESCRIPTION("RDS: IB transport");
 MODULE_LICENSE("Dual BSD/GPL");
-

net/rds/tcp.c

@@ -717,4 +717,3 @@ module_init(rds_tcp_init);
 MODULE_AUTHOR("Oracle Corporation <rds-devel@oss.oracle.com>");
 MODULE_DESCRIPTION("RDS: TCP transport");
 MODULE_LICENSE("Dual BSD/GPL");
-

net/rds/transport.c

@@ -159,4 +159,3 @@ unsigned int rds_trans_stats_info_copy(struct rds_info_iterator *iter,
 
 	return total;
 }
-

net/sched/Kconfig

 #
 # Traffic control configuration.
-# 
+#
 
 menuconfig NET_SCHED
 	bool "QoS and/or fair queueing"
@@ -706,7 +706,7 @@ config NET_CLS_ACT
 
 config NET_ACT_POLICE
 	tristate "Traffic Policing"
-        depends on NET_CLS_ACT 
+        depends on NET_CLS_ACT
         ---help---
 	  Say Y here if you want to do traffic policing, i.e. strict
 	  bandwidth limiting. This action replaces the existing policing

net/sched/Makefile

@@ -33,7 +33,7 @@ obj-$(CONFIG_NET_SCH_HTB)	+= sch_htb.o
 obj-$(CONFIG_NET_SCH_HFSC)	+= sch_hfsc.o
 obj-$(CONFIG_NET_SCH_RED)	+= sch_red.o
 obj-$(CONFIG_NET_SCH_GRED)	+= sch_gred.o
-obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o 
+obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o
 obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
 obj-$(CONFIG_NET_SCH_SFB)	+= sch_sfb.o
 obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o

net/sched/act_connmark.c

@@ -252,4 +252,3 @@ module_exit(connmark_cleanup_module);
 MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
 MODULE_DESCRIPTION("Connection tracking mark restoring");
 MODULE_LICENSE("GPL");
-

net/sched/act_pedit.c

@@ -516,4 +516,3 @@ static void __exit pedit_cleanup_module(void)
 
 module_init(pedit_init_module);
 module_exit(pedit_cleanup_module);
-

net/sched/cls_basic.c

@@ -324,4 +324,3 @@ static void __exit exit_basic(void)
 module_init(init_basic)
 module_exit(exit_basic)
 MODULE_LICENSE("GPL");
-

net/sctp/Kconfig

@@ -41,8 +41,8 @@ config SCTP_DBG_OBJCNT
 	bool "SCTP: Debug object counts"
 	depends on PROC_FS
 	help
-	  If you say Y, this will enable debugging support for counting the 
-	  type of objects that are currently allocated.  This is useful for 
+	  If you say Y, this will enable debugging support for counting the
+	  type of objects that are currently allocated.  This is useful for
 	  identifying memory leaks. This debug information can be viewed by
 	  'cat /proc/net/sctp/sctp_dbg_objcnt'
 

net/sctp/sm_sideeffect.c

@@ -1827,4 +1827,3 @@ static int sctp_cmd_interpreter(enum sctp_event event_type,
 	error = -ENOMEM;
 	goto out;
 }
-

net/wimax/Makefile

@@ -11,5 +11,3 @@ wimax-y :=		\
 	stack.o
 
 wimax-$(CONFIG_DEBUG_FS) += debugfs.o
-
-

net/wimax/debugfs.c

@@ -76,5 +76,3 @@ void wimax_debugfs_rm(struct wimax_dev *wimax_dev)
 {
 	debugfs_remove_recursive(wimax_dev->debugfs_dentry);
 }
-
-

net/wimax/op-msg.c

@@ -404,4 +404,3 @@ int wimax_gnl_doit_msg_from_user(struct sk_buff *skb, struct genl_info *info)
 	d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result);
 	return result;
 }
-

net/wimax/stack.c

@@ -630,4 +630,3 @@ module_exit(wimax_subsys_exit);
 MODULE_AUTHOR("Intel Corporation <linux-wimax@intel.com>");
 MODULE_DESCRIPTION("Linux WiMAX stack");
 MODULE_LICENSE("GPL");
-

net/x25/Kconfig

@@ -31,5 +31,3 @@ config X25
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called x25. If unsure, say N.
-
-

net/x25/x25_subr.c

@@ -381,4 +381,3 @@ void x25_check_rbuf(struct sock *sk)
 		x25_stop_timer(sk);
 	}
 }
-

net/xfrm/Kconfig

@@ -87,4 +87,3 @@ config NET_KEY_MIGRATE
 	  <draft-sugimoto-mip6-pfkey-migrate>.
 
 	  If unsure, say N.
-

net/xfrm/xfrm_user.c

@@ -3280,4 +3280,3 @@ module_init(xfrm_user_init);
 module_exit(xfrm_user_exit);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_XFRM);
-