Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: hpwdt: eliminate section mismatch warning
  watchdog: w83697ug_wdt: Fix set bit 0 to activate GPIO2
  watchdog: sch311x_wdt: fix printk condition
  watchdog: sch311x_wdt: Fix LDN active check
  watchdog: cpwd: Fix buffer-overflow

drivers/watchdog/cpwd.c

@@ -646,7 +646,7 @@ static int __devexit cpwd_remove(struct platform_device *op)
 	struct cpwd *p = dev_get_drvdata(&op->dev);
 	int i;
 
-	for (i = 0; i < 4; i++) {
+	for (i = 0; i < WD_NUMDEVS; i++) {
 		misc_deregister(&p->devs[i].misc);
 
 		if (!p->enabled) {

drivers/watchdog/hpwdt.c

@@ -710,7 +710,7 @@ static int __devinit hpwdt_init_nmi_decoding(struct pci_dev *dev)
 	return 0;
 }
 
-static void __devexit hpwdt_exit_nmi_decoding(void)
+static void hpwdt_exit_nmi_decoding(void)
 {
 	unregister_die_notifier(&die_notifier);
 	if (cru_rom_addr)
@@ -726,7 +726,7 @@ static int __devinit hpwdt_init_nmi_decoding(struct pci_dev *dev)
 	return 0;
 }
 
-static void __devexit hpwdt_exit_nmi_decoding(void)
+static void hpwdt_exit_nmi_decoding(void)
 {
 }
 #endif /* CONFIG_HPWDT_NMI_DECODING */

drivers/watchdog/sch311x_wdt.c

@@ -508,7 +508,7 @@ static int __init sch311x_detect(int sio_config_port, unsigned short *addr)
 	sch311x_sio_outb(sio_config_port, 0x07, 0x0a);
 
 	/* Check if Logical Device Register is currently active */
-	if (sch311x_sio_inb(sio_config_port, 0x30) && 0x01 == 0)
+	if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0)
 		printk(KERN_INFO PFX "Seems that LDN 0x0a is not active...\n");
 
 	/* Get the base address of the runtime registers */

drivers/watchdog/w83697ug_wdt.c

@@ -109,7 +109,7 @@ static int w83697ug_select_wd_register(void)
 	outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */
 	outb_p(0x30, WDT_EFER); /* select CR30 */
 	c = inb_p(WDT_EFDR);
-	outb_p(c || 0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
+	outb_p(c | 0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
 
 	return 0;
 }