Commit 78b93b04 authored by Colin Ian King's avatar Colin Ian King Committed by Mark Brown

ASoC: codecs: ad193x: make two arrays static const, makes object smaller

Don't populate the arrays on the stack but instead make them
static const. Makes the object code smaller by 37 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  16253	   7200	      0	  23453	   5b9d	sound/soc/codecs/ad193x.o

After:
   text	   data	    bss	    dec	    hex	filename
  16056	   7360	      0	  23416	   5b78	sound/soc/codecs/ad193x.o

(gcc version 9.2.1, amd64)
Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190906161404.1440-1-colin.king@canonical.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent ebe02a5b
...@@ -416,7 +416,7 @@ static struct snd_soc_dai_driver ad193x_no_adc_dai = { ...@@ -416,7 +416,7 @@ static struct snd_soc_dai_driver ad193x_no_adc_dai = {
/* codec register values to set after reset */ /* codec register values to set after reset */
static void ad193x_reg_default_init(struct ad193x_priv *ad193x) static void ad193x_reg_default_init(struct ad193x_priv *ad193x)
{ {
const struct reg_sequence reg_init[] = { static const struct reg_sequence reg_init[] = {
{ 0, 0x99 }, /* PLL_CLK_CTRL0: pll input: mclki/xi 12.288Mhz */ { 0, 0x99 }, /* PLL_CLK_CTRL0: pll input: mclki/xi 12.288Mhz */
{ 1, 0x04 }, /* PLL_CLK_CTRL1: no on-chip Vref */ { 1, 0x04 }, /* PLL_CLK_CTRL1: no on-chip Vref */
{ 2, 0x40 }, /* DAC_CTRL0: TDM mode */ { 2, 0x40 }, /* DAC_CTRL0: TDM mode */
...@@ -432,7 +432,7 @@ static void ad193x_reg_default_init(struct ad193x_priv *ad193x) ...@@ -432,7 +432,7 @@ static void ad193x_reg_default_init(struct ad193x_priv *ad193x)
{ 12, 0x00 }, /* DAC_L4_VOL: no attenuation */ { 12, 0x00 }, /* DAC_L4_VOL: no attenuation */
{ 13, 0x00 }, /* DAC_R4_VOL: no attenuation */ { 13, 0x00 }, /* DAC_R4_VOL: no attenuation */
}; };
const struct reg_sequence reg_adc_init[] = { static const struct reg_sequence reg_adc_init[] = {
{ 14, 0x03 }, /* ADC_CTRL0: high-pass filter enable */ { 14, 0x03 }, /* ADC_CTRL0: high-pass filter enable */
{ 15, 0x43 }, /* ADC_CTRL1: sata delay=1, adc aux mode */ { 15, 0x43 }, /* ADC_CTRL1: sata delay=1, adc aux mode */
{ 16, 0x00 }, /* ADC_CTRL2: reset */ { 16, 0x00 }, /* ADC_CTRL2: reset */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment