Commit 78e691f4 authored by Paul E. McKenney's avatar Paul E. McKenney

Merge branches 'doc.2015.01.07a', 'fixes.2015.01.15a', 'preempt.2015.01.06a',...

Merge branches 'doc.2015.01.07a', 'fixes.2015.01.15a', 'preempt.2015.01.06a', 'srcu.2015.01.06a', 'stall.2015.01.16a' and 'torture.2015.01.11a' into HEAD

doc.2015.01.07a: Documentation updates.
fixes.2015.01.15a: Miscellaneous fixes.
preempt.2015.01.06a: Changes to handling of lists of preempted tasks.
srcu.2015.01.06a: SRCU updates.
stall.2015.01.16a: RCU CPU stall-warning updates and fixes.
torture.2015.01.11a: RCU torture-test updates and fixes.
......@@ -152,6 +152,15 @@ no non-lazy callbacks ("." is printed otherwise, as shown above) and
"D" indicates that dyntick-idle processing is enabled ("." is printed
otherwise, for example, if disabled via the "nohz=" kernel boot parameter).
If the relevant grace-period kthread has been unable to run prior to
the stall warning, the following additional line is printed:
rcu_preempt kthread starved for 2023 jiffies!
Starving the grace-period kthreads of CPU time can of course result in
RCU CPU stall warnings even when all CPUs and tasks have passed through
the required quiescent states.
Multiple Warnings From One Stall
......@@ -187,6 +196,11 @@ o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the
behavior, you might need to replace some of the cond_resched()
calls with calls to cond_resched_rcu_qs().
o Anything that prevents RCU's grace-period kthreads from running.
This can result in the "All QSes seen" console-log message.
This message will include information on when the kthread last
ran and how often it should be expected to run.
o A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might
happen to preempt a low-priority task in the middle of an RCU
read-side critical section. This is especially damaging if
......
......@@ -56,14 +56,14 @@ rcuboost:
The output of "cat rcu/rcu_preempt/rcudata" looks as follows:
0!c=30455 g=30456 pq=1 qp=1 dt=126535/140000000000000/0 df=2002 of=4 ql=0/0 qs=N... b=10 ci=74572 nci=0 co=1131 ca=716
1!c=30719 g=30720 pq=1 qp=0 dt=132007/140000000000000/0 df=1874 of=10 ql=0/0 qs=N... b=10 ci=123209 nci=0 co=685 ca=982
2!c=30150 g=30151 pq=1 qp=1 dt=138537/140000000000000/0 df=1707 of=8 ql=0/0 qs=N... b=10 ci=80132 nci=0 co=1328 ca=1458
3 c=31249 g=31250 pq=1 qp=0 dt=107255/140000000000000/0 df=1749 of=6 ql=0/450 qs=NRW. b=10 ci=151700 nci=0 co=509 ca=622
4!c=29502 g=29503 pq=1 qp=1 dt=83647/140000000000000/0 df=965 of=5 ql=0/0 qs=N... b=10 ci=65643 nci=0 co=1373 ca=1521
5 c=31201 g=31202 pq=1 qp=1 dt=70422/0/0 df=535 of=7 ql=0/0 qs=.... b=10 ci=58500 nci=0 co=764 ca=698
6!c=30253 g=30254 pq=1 qp=1 dt=95363/140000000000000/0 df=780 of=5 ql=0/0 qs=N... b=10 ci=100607 nci=0 co=1414 ca=1353
7 c=31178 g=31178 pq=1 qp=0 dt=91536/0/0 df=547 of=4 ql=0/0 qs=.... b=10 ci=109819 nci=0 co=1115 ca=969
0!c=30455 g=30456 pq=1/0 qp=1 dt=126535/140000000000000/0 df=2002 of=4 ql=0/0 qs=N... b=10 ci=74572 nci=0 co=1131 ca=716
1!c=30719 g=30720 pq=1/0 qp=0 dt=132007/140000000000000/0 df=1874 of=10 ql=0/0 qs=N... b=10 ci=123209 nci=0 co=685 ca=982
2!c=30150 g=30151 pq=1/1 qp=1 dt=138537/140000000000000/0 df=1707 of=8 ql=0/0 qs=N... b=10 ci=80132 nci=0 co=1328 ca=1458
3 c=31249 g=31250 pq=1/1 qp=0 dt=107255/140000000000000/0 df=1749 of=6 ql=0/450 qs=NRW. b=10 ci=151700 nci=0 co=509 ca=622
4!c=29502 g=29503 pq=1/0 qp=1 dt=83647/140000000000000/0 df=965 of=5 ql=0/0 qs=N... b=10 ci=65643 nci=0 co=1373 ca=1521
5 c=31201 g=31202 pq=1/0 qp=1 dt=70422/0/0 df=535 of=7 ql=0/0 qs=.... b=10 ci=58500 nci=0 co=764 ca=698
6!c=30253 g=30254 pq=1/0 qp=1 dt=95363/140000000000000/0 df=780 of=5 ql=0/0 qs=N... b=10 ci=100607 nci=0 co=1414 ca=1353
7 c=31178 g=31178 pq=1/0 qp=0 dt=91536/0/0 df=547 of=4 ql=0/0 qs=.... b=10 ci=109819 nci=0 co=1115 ca=969
This file has one line per CPU, or eight for this 8-CPU system.
The fields are as follows:
......@@ -188,14 +188,14 @@ o "ca" is the number of RCU callbacks that have been adopted by this
Kernels compiled with CONFIG_RCU_BOOST=y display the following from
/debug/rcu/rcu_preempt/rcudata:
0!c=12865 g=12866 pq=1 qp=1 dt=83113/140000000000000/0 df=288 of=11 ql=0/0 qs=N... kt=0/O ktl=944 b=10 ci=60709 nci=0 co=748 ca=871
1 c=14407 g=14408 pq=1 qp=0 dt=100679/140000000000000/0 df=378 of=7 ql=0/119 qs=NRW. kt=0/W ktl=9b6 b=10 ci=109740 nci=0 co=589 ca=485
2 c=14407 g=14408 pq=1 qp=0 dt=105486/0/0 df=90 of=9 ql=0/89 qs=NRW. kt=0/W ktl=c0c b=10 ci=83113 nci=0 co=533 ca=490
3 c=14407 g=14408 pq=1 qp=0 dt=107138/0/0 df=142 of=8 ql=0/188 qs=NRW. kt=0/W ktl=b96 b=10 ci=121114 nci=0 co=426 ca=290
4 c=14405 g=14406 pq=1 qp=1 dt=50238/0/0 df=706 of=7 ql=0/0 qs=.... kt=0/W ktl=812 b=10 ci=34929 nci=0 co=643 ca=114
5!c=14168 g=14169 pq=1 qp=0 dt=45465/140000000000000/0 df=161 of=11 ql=0/0 qs=N... kt=0/O ktl=b4d b=10 ci=47712 nci=0 co=677 ca=722
6 c=14404 g=14405 pq=1 qp=0 dt=59454/0/0 df=94 of=6 ql=0/0 qs=.... kt=0/W ktl=e57 b=10 ci=55597 nci=0 co=701 ca=811
7 c=14407 g=14408 pq=1 qp=1 dt=68850/0/0 df=31 of=8 ql=0/0 qs=.... kt=0/W ktl=14bd b=10 ci=77475 nci=0 co=508 ca=1042
0!c=12865 g=12866 pq=1/0 qp=1 dt=83113/140000000000000/0 df=288 of=11 ql=0/0 qs=N... kt=0/O ktl=944 b=10 ci=60709 nci=0 co=748 ca=871
1 c=14407 g=14408 pq=1/0 qp=0 dt=100679/140000000000000/0 df=378 of=7 ql=0/119 qs=NRW. kt=0/W ktl=9b6 b=10 ci=109740 nci=0 co=589 ca=485
2 c=14407 g=14408 pq=1/0 qp=0 dt=105486/0/0 df=90 of=9 ql=0/89 qs=NRW. kt=0/W ktl=c0c b=10 ci=83113 nci=0 co=533 ca=490
3 c=14407 g=14408 pq=1/0 qp=0 dt=107138/0/0 df=142 of=8 ql=0/188 qs=NRW. kt=0/W ktl=b96 b=10 ci=121114 nci=0 co=426 ca=290
4 c=14405 g=14406 pq=1/0 qp=1 dt=50238/0/0 df=706 of=7 ql=0/0 qs=.... kt=0/W ktl=812 b=10 ci=34929 nci=0 co=643 ca=114
5!c=14168 g=14169 pq=1/0 qp=0 dt=45465/140000000000000/0 df=161 of=11 ql=0/0 qs=N... kt=0/O ktl=b4d b=10 ci=47712 nci=0 co=677 ca=722
6 c=14404 g=14405 pq=1/0 qp=0 dt=59454/0/0 df=94 of=6 ql=0/0 qs=.... kt=0/W ktl=e57 b=10 ci=55597 nci=0 co=701 ca=811
7 c=14407 g=14408 pq=1/0 qp=1 dt=68850/0/0 df=31 of=8 ql=0/0 qs=.... kt=0/W ktl=14bd b=10 ci=77475 nci=0 co=508 ca=1042
This is similar to the output discussed above, but contains the following
additional fields:
......
......@@ -23,6 +23,7 @@ config KVM
select HAVE_KVM_CPU_RELAX_INTERCEPT
select KVM_MMIO
select KVM_ARM_HOST
select SRCU
depends on ARM_VIRT_EXT && ARM_LPAE
---help---
Support hosting virtualized guest machines. You will also
......
......@@ -26,6 +26,7 @@ config KVM
select KVM_ARM_HOST
select KVM_ARM_VGIC
select KVM_ARM_TIMER
select SRCU
---help---
Support hosting virtualized guest machines.
......
......@@ -20,6 +20,7 @@ config KVM
select PREEMPT_NOTIFIERS
select ANON_INODES
select KVM_MMIO
select SRCU
---help---
Support for hosting Guest kernels.
Currently supported on MIPS32 processors.
......
......@@ -21,6 +21,7 @@ config KVM
select PREEMPT_NOTIFIERS
select ANON_INODES
select HAVE_KVM_EVENTFD
select SRCU
config KVM_BOOK3S_HANDLER
bool
......
......@@ -28,6 +28,7 @@ config KVM
select HAVE_KVM_IRQCHIP
select HAVE_KVM_IRQFD
select HAVE_KVM_IRQ_ROUTING
select SRCU
---help---
Support hosting paravirtualized guest machines using the SIE
virtualization capability on the mainframe. This should work
......
......@@ -21,6 +21,7 @@ config KVM
depends on HAVE_KVM && MODULES
select PREEMPT_NOTIFIERS
select ANON_INODES
select SRCU
---help---
Support hosting paravirtualized guest machines.
......
......@@ -138,6 +138,7 @@ config X86
select HAVE_ACPI_APEI_NMI if ACPI
select ACPI_LEGACY_TABLES_LOOKUP if ACPI
select X86_FEATURE_NAMES if PROC_FS
select SRCU
config INSTRUCTION_DECODER
def_bool y
......
......@@ -40,6 +40,7 @@ config KVM
select HAVE_KVM_MSI
select HAVE_KVM_CPU_RELAX_INTERCEPT
select KVM_VFIO
select SRCU
---help---
Support hosting fully virtualized guest machines using hardware
virtualization extensions. You will need a fairly recent
......
......@@ -13,6 +13,7 @@ config COMMON_CLK
bool
select HAVE_CLK_PREPARE
select CLKDEV_LOOKUP
select SRCU
---help---
The common clock framework is a single definition of struct
clk, useful across many platforms, as well as an
......
......@@ -2,6 +2,7 @@ menu "CPU Frequency scaling"
config CPU_FREQ
bool "CPU Frequency scaling"
select SRCU
help
CPU Frequency scaling allows you to change the clock speed of
CPUs on the fly. This is a nice method to save power, because
......
menuconfig PM_DEVFREQ
bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support"
select SRCU
help
A device may have a list of frequencies and voltages available.
devfreq, a generic DVFS framework can be registered for a device
......
......@@ -5,6 +5,7 @@
menuconfig MD
bool "Multiple devices driver support (RAID and LVM)"
depends on BLOCK
select SRCU
help
Support multiple physical spindles through a single logical device.
Required for RAID and logical volume management.
......
......@@ -197,6 +197,7 @@ config NETCONSOLE_DYNAMIC
config NETPOLL
def_bool NETCONSOLE
select SRCU
config NET_POLL_CONTROLLER
def_bool NETPOLL
......
......@@ -8,6 +8,7 @@ config BTRFS_FS
select LZO_DECOMPRESS
select RAID6_PQ
select XOR_BLOCKS
select SRCU
help
Btrfs is a general purpose copy-on-write filesystem with extents,
......
config FSNOTIFY
def_bool n
select SRCU
source "fs/notify/dnotify/Kconfig"
source "fs/notify/inotify/Kconfig"
......
......@@ -5,6 +5,7 @@
config QUOTA
bool "Quota support"
select QUOTACTL
select SRCU
help
If you say Y here, you will be able to set per user limits for disk
usage (also called disk quotas). Currently, it works for the
......
......@@ -385,7 +385,7 @@ static __always_inline void __assign_once_size(volatile void *p, void *res, int
/* Is this type a native word size -- useful for atomic operations */
#ifndef __native_word
# define __native_word(t) (sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long))
# define __native_word(t) (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long))
#endif
/* Compile time object size, -1 for unknown */
......
......@@ -524,11 +524,11 @@ static inline void hlist_add_behind_rcu(struct hlist_node *n,
* @member: the name of the hlist_node within the struct.
*/
#define hlist_for_each_entry_continue_rcu(pos, member) \
for (pos = hlist_entry_safe(rcu_dereference((pos)->member.next),\
typeof(*(pos)), member); \
for (pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu( \
&(pos)->member)), typeof(*(pos)), member); \
pos; \
pos = hlist_entry_safe(rcu_dereference((pos)->member.next),\
typeof(*(pos)), member))
pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu( \
&(pos)->member)), typeof(*(pos)), member))
/**
* hlist_for_each_entry_continue_rcu_bh - iterate over a hlist continuing after current point
......@@ -536,11 +536,11 @@ static inline void hlist_add_behind_rcu(struct hlist_node *n,
* @member: the name of the hlist_node within the struct.
*/
#define hlist_for_each_entry_continue_rcu_bh(pos, member) \
for (pos = hlist_entry_safe(rcu_dereference_bh((pos)->member.next),\
typeof(*(pos)), member); \
for (pos = hlist_entry_safe(rcu_dereference_bh(hlist_next_rcu( \
&(pos)->member)), typeof(*(pos)), member); \
pos; \
pos = hlist_entry_safe(rcu_dereference_bh((pos)->member.next),\
typeof(*(pos)), member))
pos = hlist_entry_safe(rcu_dereference_bh(hlist_next_rcu( \
&(pos)->member)), typeof(*(pos)), member))
/**
* hlist_for_each_entry_from_rcu - iterate over a hlist continuing from current point
......
......@@ -331,12 +331,13 @@ static inline void rcu_init_nohz(void)
extern struct srcu_struct tasks_rcu_exit_srcu;
#define rcu_note_voluntary_context_switch(t) \
do { \
rcu_all_qs(); \
if (ACCESS_ONCE((t)->rcu_tasks_holdout)) \
ACCESS_ONCE((t)->rcu_tasks_holdout) = false; \
} while (0)
#else /* #ifdef CONFIG_TASKS_RCU */
#define TASKS_RCU(x) do { } while (0)
#define rcu_note_voluntary_context_switch(t) do { } while (0)
#define rcu_note_voluntary_context_switch(t) rcu_all_qs()
#endif /* #else #ifdef CONFIG_TASKS_RCU */
/**
......@@ -582,11 +583,11 @@ static inline void rcu_preempt_sleep_check(void)
})
#define __rcu_dereference_check(p, c, space) \
({ \
typeof(*p) *_________p1 = (typeof(*p) *__force)ACCESS_ONCE(p); \
/* Dependency order vs. p above. */ \
typeof(*p) *________p1 = (typeof(*p) *__force)lockless_dereference(p); \
rcu_lockdep_assert(c, "suspicious rcu_dereference_check() usage"); \
rcu_dereference_sparse(p, space); \
smp_read_barrier_depends(); /* Dependency order vs. p above. */ \
((typeof(*p) __force __kernel *)(_________p1)); \
((typeof(*p) __force __kernel *)(________p1)); \
})
#define __rcu_dereference_protected(p, c, space) \
({ \
......@@ -603,10 +604,10 @@ static inline void rcu_preempt_sleep_check(void)
})
#define __rcu_dereference_index_check(p, c) \
({ \
typeof(p) _________p1 = ACCESS_ONCE(p); \
/* Dependency order vs. p above. */ \
typeof(p) _________p1 = lockless_dereference(p); \
rcu_lockdep_assert(c, \
"suspicious rcu_dereference_index_check() usage"); \
smp_read_barrier_depends(); /* Dependency order vs. p above. */ \
(_________p1); \
})
......
......@@ -92,17 +92,49 @@ static inline void rcu_virt_note_context_switch(int cpu)
}
/*
* Return the number of grace periods.
* Return the number of grace periods started.
*/
static inline long rcu_batches_completed(void)
static inline unsigned long rcu_batches_started(void)
{
return 0;
}
/*
* Return the number of bottom-half grace periods.
* Return the number of bottom-half grace periods started.
*/
static inline long rcu_batches_completed_bh(void)
static inline unsigned long rcu_batches_started_bh(void)
{
return 0;
}
/*
* Return the number of sched grace periods started.
*/
static inline unsigned long rcu_batches_started_sched(void)
{
return 0;
}
/*
* Return the number of grace periods completed.
*/
static inline unsigned long rcu_batches_completed(void)
{
return 0;
}
/*
* Return the number of bottom-half grace periods completed.
*/
static inline unsigned long rcu_batches_completed_bh(void)
{
return 0;
}
/*
* Return the number of sched grace periods completed.
*/
static inline unsigned long rcu_batches_completed_sched(void)
{
return 0;
}
......@@ -154,7 +186,10 @@ static inline bool rcu_is_watching(void)
return true;
}
#endif /* #else defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) */
static inline void rcu_all_qs(void)
{
}
#endif /* __LINUX_RCUTINY_H */
......@@ -81,9 +81,12 @@ void cond_synchronize_rcu(unsigned long oldstate);
extern unsigned long rcutorture_testseq;
extern unsigned long rcutorture_vernum;
long rcu_batches_completed(void);
long rcu_batches_completed_bh(void);
long rcu_batches_completed_sched(void);
unsigned long rcu_batches_started(void);
unsigned long rcu_batches_started_bh(void);
unsigned long rcu_batches_started_sched(void);
unsigned long rcu_batches_completed(void);
unsigned long rcu_batches_completed_bh(void);
unsigned long rcu_batches_completed_sched(void);
void show_rcu_gp_kthreads(void);
void rcu_force_quiescent_state(void);
......@@ -97,4 +100,6 @@ extern int rcu_scheduler_active __read_mostly;
bool rcu_is_watching(void);
void rcu_all_qs(void);
#endif /* __LINUX_RCUTREE_H */
......@@ -45,7 +45,7 @@ struct rcu_batch {
#define RCU_BATCH_INIT(name) { NULL, &(name.head) }
struct srcu_struct {
unsigned completed;
unsigned long completed;
struct srcu_struct_array __percpu *per_cpu_ref;
spinlock_t queue_lock; /* protect ->batch_queue, ->running */
bool running;
......@@ -102,13 +102,11 @@ void process_srcu(struct work_struct *work);
* define and init a srcu struct at build time.
* dont't call init_srcu_struct() nor cleanup_srcu_struct() on it.
*/
#define DEFINE_SRCU(name) \
#define __DEFINE_SRCU(name, is_static) \
static DEFINE_PER_CPU(struct srcu_struct_array, name##_srcu_array);\
struct srcu_struct name = __SRCU_STRUCT_INIT(name);
#define DEFINE_STATIC_SRCU(name) \
static DEFINE_PER_CPU(struct srcu_struct_array, name##_srcu_array);\
static struct srcu_struct name = __SRCU_STRUCT_INIT(name);
is_static struct srcu_struct name = __SRCU_STRUCT_INIT(name)
#define DEFINE_SRCU(name) __DEFINE_SRCU(name, /* not static */)
#define DEFINE_STATIC_SRCU(name) __DEFINE_SRCU(name, static)
/**
* call_srcu() - Queue a callback for invocation after an SRCU grace period
......@@ -135,7 +133,7 @@ int __srcu_read_lock(struct srcu_struct *sp) __acquires(sp);
void __srcu_read_unlock(struct srcu_struct *sp, int idx) __releases(sp);
void synchronize_srcu(struct srcu_struct *sp);
void synchronize_srcu_expedited(struct srcu_struct *sp);
long srcu_batches_completed(struct srcu_struct *sp);
unsigned long srcu_batches_completed(struct srcu_struct *sp);
void srcu_barrier(struct srcu_struct *sp);
#ifdef CONFIG_DEBUG_LOCK_ALLOC
......
......@@ -470,7 +470,6 @@ choice
config TREE_RCU
bool "Tree-based hierarchical RCU"
depends on !PREEMPT && SMP
select IRQ_WORK
help
This option selects the RCU implementation that is
designed for very large SMP system with hundreds or
......@@ -480,7 +479,6 @@ config TREE_RCU
config PREEMPT_RCU
bool "Preemptible tree-based hierarchical RCU"
depends on PREEMPT
select IRQ_WORK
help
This option selects the RCU implementation that is
designed for very large SMP systems with hundreds or
......@@ -501,9 +499,17 @@ config TINY_RCU
endchoice
config SRCU
bool
help
This option selects the sleepable version of RCU. This version
permits arbitrary sleeping or blocking within RCU read-side critical
sections.
config TASKS_RCU
bool "Task_based RCU implementation using voluntary context switch"
default n
select SRCU
help
This option enables a task-based RCU implementation that uses
only voluntary context switch (not preemption!), idle, and
......@@ -668,9 +674,10 @@ config RCU_BOOST
config RCU_KTHREAD_PRIO
int "Real-time priority to use for RCU worker threads"
range 1 99
depends on RCU_BOOST
default 1
range 1 99 if RCU_BOOST
range 0 99 if !RCU_BOOST
default 1 if RCU_BOOST
default 0 if !RCU_BOOST
help
This option specifies the SCHED_FIFO priority value that will be
assigned to the rcuc/n and rcub/n threads and is also the value
......@@ -1595,6 +1602,7 @@ config PERF_EVENTS
depends on HAVE_PERF_EVENTS
select ANON_INODES
select IRQ_WORK
select SRCU
help
Enable kernel support for various performance events provided
by software and hardware.
......
......@@ -58,22 +58,23 @@ static int cpu_hotplug_disabled;
static struct {
struct task_struct *active_writer;
struct mutex lock; /* Synchronizes accesses to refcount, */
/* wait queue to wake up the active_writer */
wait_queue_head_t wq;
/* verifies that no writer will get active while readers are active */
struct mutex lock;
/*
* Also blocks the new readers during
* an ongoing cpu hotplug operation.
*/
int refcount;
/* And allows lockless put_online_cpus(). */
atomic_t puts_pending;
atomic_t refcount;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
struct lockdep_map dep_map;
#endif
} cpu_hotplug = {
.active_writer = NULL,
.wq = __WAIT_QUEUE_HEAD_INITIALIZER(cpu_hotplug.wq),
.lock = __MUTEX_INITIALIZER(cpu_hotplug.lock),
.refcount = 0,
#ifdef CONFIG_DEBUG_LOCK_ALLOC
.dep_map = {.name = "cpu_hotplug.lock" },
#endif
......@@ -86,15 +87,6 @@ static struct {
#define cpuhp_lock_acquire() lock_map_acquire(&cpu_hotplug.dep_map)
#define cpuhp_lock_release() lock_map_release(&cpu_hotplug.dep_map)
static void apply_puts_pending(int max)
{
int delta;
if (atomic_read(&cpu_hotplug.puts_pending) >= max) {
delta = atomic_xchg(&cpu_hotplug.puts_pending, 0);
cpu_hotplug.refcount -= delta;
}
}
void get_online_cpus(void)
{
......@@ -103,8 +95,7 @@ void get_online_cpus(void)
return;
cpuhp_lock_acquire_read();
mutex_lock(&cpu_hotplug.lock);
apply_puts_pending(65536);
cpu_hotplug.refcount++;
atomic_inc(&cpu_hotplug.refcount);
mutex_unlock(&cpu_hotplug.lock);
}
EXPORT_SYMBOL_GPL(get_online_cpus);
......@@ -116,8 +107,7 @@ bool try_get_online_cpus(void)
if (!mutex_trylock(&cpu_hotplug.lock))
return false;
cpuhp_lock_acquire_tryread();
apply_puts_pending(65536);
cpu_hotplug.refcount++;
atomic_inc(&cpu_hotplug.refcount);
mutex_unlock(&cpu_hotplug.lock);
return true;
}
......@@ -125,20 +115,18 @@ EXPORT_SYMBOL_GPL(try_get_online_cpus);
void put_online_cpus(void)
{
int refcount;
if (cpu_hotplug.active_writer == current)
return;
if (!mutex_trylock(&cpu_hotplug.lock)) {
atomic_inc(&cpu_hotplug.puts_pending);
cpuhp_lock_release();
return;
}
if (WARN_ON(!cpu_hotplug.refcount))
cpu_hotplug.refcount++; /* try to fix things up */
refcount = atomic_dec_return(&cpu_hotplug.refcount);
if (WARN_ON(refcount < 0)) /* try to fix things up */
atomic_inc(&cpu_hotplug.refcount);
if (refcount <= 0 && waitqueue_active(&cpu_hotplug.wq))
wake_up(&cpu_hotplug.wq);
if (!--cpu_hotplug.refcount && unlikely(cpu_hotplug.active_writer))
wake_up_process(cpu_hotplug.active_writer);
mutex_unlock(&cpu_hotplug.lock);
cpuhp_lock_release();
}
......@@ -168,18 +156,20 @@ EXPORT_SYMBOL_GPL(put_online_cpus);
*/
void cpu_hotplug_begin(void)
{
cpu_hotplug.active_writer = current;
DEFINE_WAIT(wait);
cpu_hotplug.active_writer = current;
cpuhp_lock_acquire();
for (;;) {
mutex_lock(&cpu_hotplug.lock);
apply_puts_pending(1);
if (likely(!cpu_hotplug.refcount))
break;
__set_current_state(TASK_UNINTERRUPTIBLE);
prepare_to_wait(&cpu_hotplug.wq, &wait, TASK_UNINTERRUPTIBLE);
if (likely(!atomic_read(&cpu_hotplug.refcount)))
break;
mutex_unlock(&cpu_hotplug.lock);
schedule();
}
finish_wait(&cpu_hotplug.wq, &wait);
}
void cpu_hotplug_done(void)
......
......@@ -402,6 +402,7 @@ int raw_notifier_call_chain(struct raw_notifier_head *nh,
}
EXPORT_SYMBOL_GPL(raw_notifier_call_chain);
#ifdef CONFIG_SRCU
/*
* SRCU notifier chain routines. Registration and unregistration
* use a mutex, and call_chain is synchronized by SRCU (no locks).
......@@ -528,6 +529,8 @@ void srcu_init_notifier_head(struct srcu_notifier_head *nh)
}
EXPORT_SYMBOL_GPL(srcu_init_notifier_head);
#endif /* CONFIG_SRCU */
static ATOMIC_NOTIFIER_HEAD(die_chain);
int notrace notify_die(enum die_val val, const char *str,
......
......@@ -251,6 +251,7 @@ config APM_EMULATION
config PM_OPP
bool
select SRCU
---help---
SOCs have a standard set of tuples consisting of frequency and
voltage pairs that the device will support per voltage domain. This
......
obj-y += update.o srcu.o
obj-y += update.o
obj-$(CONFIG_SRCU) += srcu.o
obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
obj-$(CONFIG_TREE_RCU) += tree.o
obj-$(CONFIG_PREEMPT_RCU) += tree.o
......
......@@ -137,4 +137,10 @@ int rcu_jiffies_till_stall_check(void);
void rcu_early_boot_tests(void);
/*
* This function really isn't for public consumption, but RCU is special in
* that context switches can allow the state machine to make progress.
*/
extern void resched_cpu(int cpu);
#endif /* __LINUX_RCU_H */
......@@ -244,7 +244,8 @@ struct rcu_torture_ops {
int (*readlock)(void);
void (*read_delay)(struct torture_random_state *rrsp);
void (*readunlock)(int idx);
int (*completed)(void);
unsigned long (*started)(void);
unsigned long (*completed)(void);
void (*deferred_free)(struct rcu_torture *p);
void (*sync)(void);
void (*exp_sync)(void);
......@@ -296,11 +297,6 @@ static void rcu_torture_read_unlock(int idx) __releases(RCU)
rcu_read_unlock();
}
static int rcu_torture_completed(void)
{
return rcu_batches_completed();
}
/*
* Update callback in the pipe. This should be invoked after a grace period.
*/
......@@ -356,7 +352,7 @@ rcu_torture_cb(struct rcu_head *p)
cur_ops->deferred_free(rp);
}
static int rcu_no_completed(void)
static unsigned long rcu_no_completed(void)
{
return 0;
}
......@@ -377,7 +373,8 @@ static struct rcu_torture_ops rcu_ops = {
.readlock = rcu_torture_read_lock,
.read_delay = rcu_read_delay,
.readunlock = rcu_torture_read_unlock,
.completed = rcu_torture_completed,
.started = rcu_batches_started,
.completed = rcu_batches_completed,
.deferred_free = rcu_torture_deferred_free,
.sync = synchronize_rcu,
.exp_sync = synchronize_rcu_expedited,
......@@ -407,11 +404,6 @@ static void rcu_bh_torture_read_unlock(int idx) __releases(RCU_BH)
rcu_read_unlock_bh();
}
static int rcu_bh_torture_completed(void)
{
return rcu_batches_completed_bh();
}
static void rcu_bh_torture_deferred_free(struct rcu_torture *p)
{
call_rcu_bh(&p->rtort_rcu, rcu_torture_cb);
......@@ -423,7 +415,8 @@ static struct rcu_torture_ops rcu_bh_ops = {
.readlock = rcu_bh_torture_read_lock,
.read_delay = rcu_read_delay, /* just reuse rcu's version. */
.readunlock = rcu_bh_torture_read_unlock,
.completed = rcu_bh_torture_completed,
.started = rcu_batches_started_bh,
.completed = rcu_batches_completed_bh,
.deferred_free = rcu_bh_torture_deferred_free,
.sync = synchronize_rcu_bh,
.exp_sync = synchronize_rcu_bh_expedited,
......@@ -466,6 +459,7 @@ static struct rcu_torture_ops rcu_busted_ops = {
.readlock = rcu_torture_read_lock,
.read_delay = rcu_read_delay, /* just reuse rcu's version. */
.readunlock = rcu_torture_read_unlock,
.started = rcu_no_completed,
.completed = rcu_no_completed,
.deferred_free = rcu_busted_torture_deferred_free,
.sync = synchronize_rcu_busted,
......@@ -510,7 +504,7 @@ static void srcu_torture_read_unlock(int idx) __releases(&srcu_ctl)
srcu_read_unlock(&srcu_ctl, idx);
}
static int srcu_torture_completed(void)
static unsigned long srcu_torture_completed(void)
{
return srcu_batches_completed(&srcu_ctl);
}
......@@ -564,6 +558,7 @@ static struct rcu_torture_ops srcu_ops = {
.readlock = srcu_torture_read_lock,
.read_delay = srcu_read_delay,
.readunlock = srcu_torture_read_unlock,
.started = NULL,
.completed = srcu_torture_completed,
.deferred_free = srcu_torture_deferred_free,
.sync = srcu_torture_synchronize,
......@@ -600,7 +595,8 @@ static struct rcu_torture_ops sched_ops = {
.readlock = sched_torture_read_lock,
.read_delay = rcu_read_delay, /* just reuse rcu's version. */
.readunlock = sched_torture_read_unlock,
.completed = rcu_no_completed,
.started = rcu_batches_started_sched,
.completed = rcu_batches_completed_sched,
.deferred_free = rcu_sched_torture_deferred_free,
.sync = synchronize_sched,
.exp_sync = synchronize_sched_expedited,
......@@ -638,6 +634,7 @@ static struct rcu_torture_ops tasks_ops = {
.readlock = tasks_torture_read_lock,
.read_delay = rcu_read_delay, /* just reuse rcu's version. */
.readunlock = tasks_torture_read_unlock,
.started = rcu_no_completed,
.completed = rcu_no_completed,
.deferred_free = rcu_tasks_torture_deferred_free,
.sync = synchronize_rcu_tasks,
......@@ -1015,8 +1012,8 @@ static void rcutorture_trace_dump(void)
static void rcu_torture_timer(unsigned long unused)
{
int idx;
int completed;
int completed_end;
unsigned long started;
unsigned long completed;
static DEFINE_TORTURE_RANDOM(rand);
static DEFINE_SPINLOCK(rand_lock);
struct rcu_torture *p;
......@@ -1024,7 +1021,10 @@ static void rcu_torture_timer(unsigned long unused)
unsigned long long ts;
idx = cur_ops->readlock();
completed = cur_ops->completed();
if (cur_ops->started)
started = cur_ops->started();
else
started = cur_ops->completed();
ts = rcu_trace_clock_local();
p = rcu_dereference_check(rcu_torture_current,
rcu_read_lock_bh_held() ||
......@@ -1047,14 +1047,16 @@ static void rcu_torture_timer(unsigned long unused)
/* Should not happen, but... */
pipe_count = RCU_TORTURE_PIPE_LEN;
}
completed_end = cur_ops->completed();
completed = cur_ops->completed();
if (pipe_count > 1) {
do_trace_rcu_torture_read(cur_ops->name, &p->rtort_rcu, ts,
completed, completed_end);
started, completed);
rcutorture_trace_dump();
}
__this_cpu_inc(rcu_torture_count[pipe_count]);
completed = completed_end - completed;
completed = completed - started;
if (cur_ops->started)
completed++;
if (completed > RCU_TORTURE_PIPE_LEN) {
/* Should not happen, but... */
completed = RCU_TORTURE_PIPE_LEN;
......@@ -1073,8 +1075,8 @@ static void rcu_torture_timer(unsigned long unused)
static int
rcu_torture_reader(void *arg)
{
int completed;
int completed_end;
unsigned long started;
unsigned long completed;
int idx;
DEFINE_TORTURE_RANDOM(rand);
struct rcu_torture *p;
......@@ -1093,7 +1095,10 @@ rcu_torture_reader(void *arg)
mod_timer(&t, jiffies + 1);
}
idx = cur_ops->readlock();
completed = cur_ops->completed();
if (cur_ops->started)
started = cur_ops->started();
else
started = cur_ops->completed();
ts = rcu_trace_clock_local();
p = rcu_dereference_check(rcu_torture_current,
rcu_read_lock_bh_held() ||
......@@ -1114,14 +1119,16 @@ rcu_torture_reader(void *arg)
/* Should not happen, but... */
pipe_count = RCU_TORTURE_PIPE_LEN;
}
completed_end = cur_ops->completed();
completed = cur_ops->completed();
if (pipe_count > 1) {
do_trace_rcu_torture_read(cur_ops->name, &p->rtort_rcu,
ts, completed, completed_end);
ts, started, completed);
rcutorture_trace_dump();
}
__this_cpu_inc(rcu_torture_count[pipe_count]);
completed = completed_end - completed;
completed = completed - started;
if (cur_ops->started)
completed++;
if (completed > RCU_TORTURE_PIPE_LEN) {
/* Should not happen, but... */
completed = RCU_TORTURE_PIPE_LEN;
......@@ -1420,6 +1427,9 @@ static int rcu_torture_barrier(void *arg)
cur_ops->cb_barrier(); /* Implies smp_mb() for wait_event(). */
if (atomic_read(&barrier_cbs_invoked) != n_barrier_cbs) {
n_rcu_torture_barrier_error++;
pr_err("barrier_cbs_invoked = %d, n_barrier_cbs = %d\n",
atomic_read(&barrier_cbs_invoked),
n_barrier_cbs);
WARN_ON_ONCE(1);
}
n_barrier_successes++;
......
......@@ -546,7 +546,7 @@ EXPORT_SYMBOL_GPL(srcu_barrier);
* Report the number of batches, correlated with, but not necessarily
* precisely the same as, the number of grace periods that have elapsed.
*/
long srcu_batches_completed(struct srcu_struct *sp)
unsigned long srcu_batches_completed(struct srcu_struct *sp)
{
return sp->completed;
}
......
......@@ -47,54 +47,14 @@ static void __call_rcu(struct rcu_head *head,
void (*func)(struct rcu_head *rcu),
struct rcu_ctrlblk *rcp);
static long long rcu_dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
#include "tiny_plugin.h"
/* Common code for rcu_idle_enter() and rcu_irq_exit(), see kernel/rcu/tree.c. */
static void rcu_idle_enter_common(long long newval)
{
if (newval) {
RCU_TRACE(trace_rcu_dyntick(TPS("--="),
rcu_dynticks_nesting, newval));
rcu_dynticks_nesting = newval;
return;
}
RCU_TRACE(trace_rcu_dyntick(TPS("Start"),
rcu_dynticks_nesting, newval));
if (IS_ENABLED(CONFIG_RCU_TRACE) && !is_idle_task(current)) {
struct task_struct *idle __maybe_unused = idle_task(smp_processor_id());
RCU_TRACE(trace_rcu_dyntick(TPS("Entry error: not idle task"),
rcu_dynticks_nesting, newval));
ftrace_dump(DUMP_ALL);
WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s",
current->pid, current->comm,
idle->pid, idle->comm); /* must be idle task! */
}
rcu_sched_qs(); /* implies rcu_bh_inc() */
barrier();
rcu_dynticks_nesting = newval;
}
/*
* Enter idle, which is an extended quiescent state if we have fully
* entered that mode (i.e., if the new value of dynticks_nesting is zero).
* entered that mode.
*/
void rcu_idle_enter(void)
{
unsigned long flags;
long long newval;
local_irq_save(flags);
WARN_ON_ONCE((rcu_dynticks_nesting & DYNTICK_TASK_NEST_MASK) == 0);
if ((rcu_dynticks_nesting & DYNTICK_TASK_NEST_MASK) ==
DYNTICK_TASK_NEST_VALUE)
newval = 0;
else
newval = rcu_dynticks_nesting - DYNTICK_TASK_NEST_VALUE;
rcu_idle_enter_common(newval);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(rcu_idle_enter);
......@@ -103,55 +63,14 @@ EXPORT_SYMBOL_GPL(rcu_idle_enter);
*/
void rcu_irq_exit(void)
{
unsigned long flags;
long long newval;
local_irq_save(flags);
newval = rcu_dynticks_nesting - 1;
WARN_ON_ONCE(newval < 0);
rcu_idle_enter_common(newval);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(rcu_irq_exit);
/* Common code for rcu_idle_exit() and rcu_irq_enter(), see kernel/rcu/tree.c. */
static void rcu_idle_exit_common(long long oldval)
{
if (oldval) {
RCU_TRACE(trace_rcu_dyntick(TPS("++="),
oldval, rcu_dynticks_nesting));
return;
}
RCU_TRACE(trace_rcu_dyntick(TPS("End"), oldval, rcu_dynticks_nesting));
if (IS_ENABLED(CONFIG_RCU_TRACE) && !is_idle_task(current)) {
struct task_struct *idle __maybe_unused = idle_task(smp_processor_id());
RCU_TRACE(trace_rcu_dyntick(TPS("Exit error: not idle task"),
oldval, rcu_dynticks_nesting));
ftrace_dump(DUMP_ALL);
WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s",
current->pid, current->comm,
idle->pid, idle->comm); /* must be idle task! */
}
}
/*
* Exit idle, so that we are no longer in an extended quiescent state.
*/
void rcu_idle_exit(void)
{
unsigned long flags;
long long oldval;
local_irq_save(flags);
oldval = rcu_dynticks_nesting;
WARN_ON_ONCE(rcu_dynticks_nesting < 0);
if (rcu_dynticks_nesting & DYNTICK_TASK_NEST_MASK)
rcu_dynticks_nesting += DYNTICK_TASK_NEST_VALUE;
else
rcu_dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
rcu_idle_exit_common(oldval);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(rcu_idle_exit);
......@@ -160,15 +79,6 @@ EXPORT_SYMBOL_GPL(rcu_idle_exit);
*/
void rcu_irq_enter(void)
{
unsigned long flags;
long long oldval;
local_irq_save(flags);
oldval = rcu_dynticks_nesting;
rcu_dynticks_nesting++;
WARN_ON_ONCE(rcu_dynticks_nesting == 0);
rcu_idle_exit_common(oldval);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(rcu_irq_enter);
......@@ -179,22 +89,12 @@ EXPORT_SYMBOL_GPL(rcu_irq_enter);
*/
bool notrace __rcu_is_watching(void)
{
return rcu_dynticks_nesting;
return true;
}
EXPORT_SYMBOL(__rcu_is_watching);
#endif /* defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) */
/*
* Test whether the current CPU was interrupted from idle. Nested
* interrupts don't count, we must be running at the first interrupt
* level.
*/
static int rcu_is_cpu_rrupt_from_idle(void)
{
return rcu_dynticks_nesting <= 1;
}
/*
* Helper function for rcu_sched_qs() and rcu_bh_qs().
* Also irqs are disabled to avoid confusion due to interrupt handlers
......@@ -250,7 +150,7 @@ void rcu_bh_qs(void)
void rcu_check_callbacks(int user)
{
RCU_TRACE(check_cpu_stalls());
if (user || rcu_is_cpu_rrupt_from_idle())
if (user)
rcu_sched_qs();
else if (!in_softirq())
rcu_bh_qs();
......@@ -357,6 +257,11 @@ static void __call_rcu(struct rcu_head *head,
rcp->curtail = &head->next;
RCU_TRACE(rcp->qlen++);
local_irq_restore(flags);
if (unlikely(is_idle_task(current))) {
/* force scheduling for rcu_sched_qs() */
resched_cpu(0);
}
}
/*
......@@ -383,6 +288,8 @@ EXPORT_SYMBOL_GPL(call_rcu_bh);
void __init rcu_init(void)
{
open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
RCU_TRACE(reset_cpu_stall_ticks(&rcu_sched_ctrlblk));
RCU_TRACE(reset_cpu_stall_ticks(&rcu_bh_ctrlblk));
rcu_early_boot_tests();
}
......@@ -145,17 +145,16 @@ static void check_cpu_stall(struct rcu_ctrlblk *rcp)
rcp->ticks_this_gp++;
j = jiffies;
js = ACCESS_ONCE(rcp->jiffies_stall);
if (*rcp->curtail && ULONG_CMP_GE(j, js)) {
if (rcp->rcucblist && ULONG_CMP_GE(j, js)) {
pr_err("INFO: %s stall on CPU (%lu ticks this GP) idle=%llx (t=%lu jiffies q=%ld)\n",
rcp->name, rcp->ticks_this_gp, rcu_dynticks_nesting,
rcp->name, rcp->ticks_this_gp, DYNTICK_TASK_EXIT_IDLE,
jiffies - rcp->gp_start, rcp->qlen);
dump_stack();
}
if (*rcp->curtail && ULONG_CMP_GE(j, js))
ACCESS_ONCE(rcp->jiffies_stall) = jiffies +
3 * rcu_jiffies_till_stall_check() + 3;
else if (ULONG_CMP_GE(j, js))
} else if (ULONG_CMP_GE(j, js)) {
ACCESS_ONCE(rcp->jiffies_stall) = jiffies + rcu_jiffies_till_stall_check();
}
}
static void reset_cpu_stall_ticks(struct rcu_ctrlblk *rcp)
......
This diff is collapsed.
......@@ -27,7 +27,6 @@
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/seqlock.h>
#include <linux/irq_work.h>
/*
* Define shape of hierarchy based on NR_CPUS, CONFIG_RCU_FANOUT, and
......@@ -172,11 +171,6 @@ struct rcu_node {
/* queued on this rcu_node structure that */
/* are blocking the current grace period, */
/* there can be no such task. */
struct completion boost_completion;
/* Used to ensure that the rt_mutex used */
/* to carry out the boosting is fully */
/* released with no future boostee accesses */
/* before that rt_mutex is re-initialized. */
struct rt_mutex boost_mtx;
/* Used only for the priority-boosting */
/* side effect, not as a lock. */
......@@ -257,9 +251,12 @@ struct rcu_data {
/* in order to detect GP end. */
unsigned long gpnum; /* Highest gp number that this CPU */
/* is aware of having started. */
unsigned long rcu_qs_ctr_snap;/* Snapshot of rcu_qs_ctr to check */
/* for rcu_all_qs() invocations. */
bool passed_quiesce; /* User-mode/idle loop etc. */
bool qs_pending; /* Core waits for quiesc state. */
bool beenonline; /* CPU online at least once. */
bool gpwrap; /* Possible gpnum/completed wrap. */
struct rcu_node *mynode; /* This CPU's leaf of hierarchy */
unsigned long grpmask; /* Mask to apply to leaf qsmask. */
#ifdef CONFIG_RCU_CPU_STALL_INFO
......@@ -340,14 +337,10 @@ struct rcu_data {
#ifdef CONFIG_RCU_NOCB_CPU
struct rcu_head *nocb_head; /* CBs waiting for kthread. */
struct rcu_head **nocb_tail;
atomic_long_t nocb_q_count; /* # CBs waiting for kthread */
atomic_long_t nocb_q_count_lazy; /* (approximate). */
atomic_long_t nocb_q_count; /* # CBs waiting for nocb */
atomic_long_t nocb_q_count_lazy; /* invocation (all stages). */
struct rcu_head *nocb_follower_head; /* CBs ready to invoke. */
struct rcu_head **nocb_follower_tail;
atomic_long_t nocb_follower_count; /* # CBs ready to invoke. */
atomic_long_t nocb_follower_count_lazy; /* (approximate). */
int nocb_p_count; /* # CBs being invoked by kthread */
int nocb_p_count_lazy; /* (approximate). */
wait_queue_head_t nocb_wq; /* For nocb kthreads to sleep on. */
struct task_struct *nocb_kthread;
int nocb_defer_wakeup; /* Defer wakeup of nocb_kthread. */
......@@ -356,8 +349,6 @@ struct rcu_data {
struct rcu_head *nocb_gp_head ____cacheline_internodealigned_in_smp;
/* CBs waiting for GP. */
struct rcu_head **nocb_gp_tail;
long nocb_gp_count;
long nocb_gp_count_lazy;
bool nocb_leader_sleep; /* Is the nocb leader thread asleep? */
struct rcu_data *nocb_next_follower;
/* Next follower in wakeup chain. */
......@@ -488,10 +479,14 @@ struct rcu_state {
/* due to no GP active. */
unsigned long gp_start; /* Time at which GP started, */
/* but in jiffies. */
unsigned long gp_activity; /* Time of last GP kthread */
/* activity in jiffies. */
unsigned long jiffies_stall; /* Time at which to check */
/* for CPU stalls. */
unsigned long jiffies_resched; /* Time at which to resched */
/* a reluctant CPU. */
unsigned long n_force_qs_gpstart; /* Snapshot of n_force_qs at */
/* GP start. */
unsigned long gp_max; /* Maximum GP duration in */
/* jiffies. */
const char *name; /* Name of structure. */
......@@ -514,13 +509,6 @@ extern struct list_head rcu_struct_flavors;
#define for_each_rcu_flavor(rsp) \
list_for_each_entry((rsp), &rcu_struct_flavors, flavors)
/* Return values for rcu_preempt_offline_tasks(). */
#define RCU_OFL_TASKS_NORM_GP 0x1 /* Tasks blocking normal */
/* GP were moved to root. */
#define RCU_OFL_TASKS_EXP_GP 0x2 /* Tasks blocking expedited */
/* GP were moved to root. */
/*
* RCU implementation internal declarations:
*/
......@@ -546,27 +534,16 @@ DECLARE_PER_CPU(char, rcu_cpu_has_work);
/* Forward declarations for rcutree_plugin.h */
static void rcu_bootup_announce(void);
long rcu_batches_completed(void);
static void rcu_preempt_note_context_switch(void);
static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
unsigned long flags);
static bool rcu_preempt_has_tasks(struct rcu_node *rnp);
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
static void rcu_print_detail_task_stall(struct rcu_state *rsp);
static int rcu_print_task_stall(struct rcu_node *rnp);
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
struct rcu_node *rnp,
struct rcu_data *rdp);
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
static void rcu_preempt_check_callbacks(void);
void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu));
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PREEMPT_RCU)
static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp,
bool wake);
#endif /* #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PREEMPT_RCU) */
static void __init __rcu_init_preempt(void);
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags);
static void rcu_preempt_boost_start_gp(struct rcu_node *rnp);
......@@ -622,24 +599,15 @@ static void rcu_dynticks_task_exit(void);
#endif /* #ifndef RCU_TREE_NONCORE */
#ifdef CONFIG_RCU_TRACE
#ifdef CONFIG_RCU_NOCB_CPU
/* Sum up queue lengths for tracing. */
/* Read out queue lengths for tracing. */
static inline void rcu_nocb_q_lengths(struct rcu_data *rdp, long *ql, long *qll)
{
*ql = atomic_long_read(&rdp->nocb_q_count) +
rdp->nocb_p_count +
atomic_long_read(&rdp->nocb_follower_count) +
rdp->nocb_p_count + rdp->nocb_gp_count;
*qll = atomic_long_read(&rdp->nocb_q_count_lazy) +
rdp->nocb_p_count_lazy +
atomic_long_read(&rdp->nocb_follower_count_lazy) +
rdp->nocb_p_count_lazy + rdp->nocb_gp_count_lazy;
}
#ifdef CONFIG_RCU_NOCB_CPU
*ql = atomic_long_read(&rdp->nocb_q_count);
*qll = atomic_long_read(&rdp->nocb_q_count_lazy);
#else /* #ifdef CONFIG_RCU_NOCB_CPU */
static inline void rcu_nocb_q_lengths(struct rcu_data *rdp, long *ql, long *qll)
{
*ql = 0;
*qll = 0;
}
#endif /* #else #ifdef CONFIG_RCU_NOCB_CPU */
}
#endif /* #ifdef CONFIG_RCU_TRACE */
This diff is collapsed.
......@@ -46,6 +46,8 @@
#define RCU_TREE_NONCORE
#include "tree.h"
DECLARE_PER_CPU_SHARED_ALIGNED(unsigned long, rcu_qs_ctr);
static int r_open(struct inode *inode, struct file *file,
const struct seq_operations *op)
{
......@@ -115,11 +117,13 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp)
if (!rdp->beenonline)
return;
seq_printf(m, "%3d%cc=%ld g=%ld pq=%d qp=%d",
seq_printf(m, "%3d%cc=%ld g=%ld pq=%d/%d qp=%d",
rdp->cpu,
cpu_is_offline(rdp->cpu) ? '!' : ' ',
ulong2long(rdp->completed), ulong2long(rdp->gpnum),
rdp->passed_quiesce, rdp->qs_pending);
rdp->passed_quiesce,
rdp->rcu_qs_ctr_snap == per_cpu(rcu_qs_ctr, rdp->cpu),
rdp->qs_pending);
seq_printf(m, " dt=%d/%llx/%d df=%lu",
atomic_read(&rdp->dynticks->dynticks),
rdp->dynticks->dynticks_nesting,
......
......@@ -656,9 +656,8 @@ static void run_ksoftirqd(unsigned int cpu)
* in the task stack here.
*/
__do_softirq();
rcu_note_context_switch();
local_irq_enable();
cond_resched();
cond_resched_rcu_qs();
return;
}
local_irq_enable();
......
......@@ -1215,6 +1215,7 @@ config RCU_TORTURE_TEST
tristate "torture tests for RCU"
depends on DEBUG_KERNEL
select TORTURE_TEST
select SRCU
default n
help
This option provides a kernel module that runs torture tests
......@@ -1257,7 +1258,7 @@ config RCU_CPU_STALL_TIMEOUT
config RCU_CPU_STALL_INFO
bool "Print additional diagnostics on RCU CPU stall"
depends on (TREE_RCU || PREEMPT_RCU) && DEBUG_KERNEL
default n
default y
help
For each stalled CPU that is aware of the current RCU grace
period, print out additional per-CPU diagnostic information
......
......@@ -325,6 +325,7 @@ config VIRT_TO_BUS
config MMU_NOTIFIER
bool
select SRCU
config KSM
bool "Enable KSM for page merging"
......
......@@ -5,6 +5,7 @@ config SECURITY_TOMOYO
select SECURITYFS
select SECURITY_PATH
select SECURITY_NETWORK
select SRCU
default n
help
This selects TOMOYO Linux, pathname-based access control.
......
......@@ -24,7 +24,7 @@
ncpus=`grep '^processor' /proc/cpuinfo | wc -l`
idlecpus=`mpstat | tail -1 | \
awk -v ncpus=$ncpus '{ print ncpus * ($7 + $12) / 100 }'`
awk -v ncpus=$ncpus '{ print ncpus * ($7 + $NF) / 100 }'`
awk -v ncpus=$ncpus -v idlecpus=$idlecpus < /dev/null '
BEGIN {
cpus2use = idlecpus;
......
......@@ -30,6 +30,7 @@ else
echo Unreadable results directory: $i
exit 1
fi
. tools/testing/selftests/rcutorture/bin/functions.sh
configfile=`echo $i | sed -e 's/^.*\///'`
ngps=`grep ver: $i/console.log 2> /dev/null | tail -1 | sed -e 's/^.* ver: //' -e 's/ .*$//'`
......@@ -48,4 +49,21 @@ else
title="$title ($ngpsps per second)"
fi
echo $title
nclosecalls=`grep --binary-files=text 'torture: Reader Batch' $i/console.log | tail -1 | awk '{for (i=NF-8;i<=NF;i++) sum+=$i; } END {print sum}'`
if test -z "$nclosecalls"
then
exit 0
fi
if test "$nclosecalls" -eq 0
then
exit 0
fi
# Compute number of close calls per tenth of an hour
nclosecalls10=`awk -v nclosecalls=$nclosecalls -v dur=$dur 'BEGIN { print int(nclosecalls * 36000 / dur) }' < /dev/null`
if test $nclosecalls10 -gt 5 -a $nclosecalls -gt 1
then
print_bug $nclosecalls "Reader Batch close calls in" $(($dur/60)) minute run: $i
else
print_warning $nclosecalls "Reader Batch close calls in" $(($dur/60)) minute run: $i
fi
fi
......@@ -8,9 +8,9 @@
#
# Usage: kvm-test-1-run.sh config builddir resdir minutes qemu-args boot_args
#
# qemu-args defaults to "-nographic", along with arguments specifying the
# number of CPUs and other options generated from
# the underlying CPU architecture.
# qemu-args defaults to "-enable-kvm -soundhw pcspk -nographic", along with
# arguments specifying the number of CPUs and other
# options generated from the underlying CPU architecture.
# boot_args defaults to value returned by the per_version_boot_params
# shell function.
#
......@@ -138,7 +138,7 @@ then
fi
# Generate -smp qemu argument.
qemu_args="-nographic $qemu_args"
qemu_args="-enable-kvm -soundhw pcspk -nographic $qemu_args"
cpu_count=`configNR_CPUS.sh $config_template`
cpu_count=`configfrag_boot_cpus "$boot_args" "$config_template" "$cpu_count"`
vcpus=`identify_qemu_vcpus`
......@@ -168,6 +168,7 @@ then
touch $resdir/buildonly
exit 0
fi
echo "NOTE: $QEMU either did not run or was interactive" > $builddir/console.log
echo $QEMU $qemu_args -m 512 -kernel $resdir/bzImage -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd
( $QEMU $qemu_args -m 512 -kernel $resdir/bzImage -append "$qemu_append $boot_args"; echo $? > $resdir/qemu-retval ) &
qemu_pid=$!
......
......@@ -26,12 +26,15 @@
#
# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
T=$1
F=$1
title=$2
T=/tmp/parse-build.sh.$$
trap 'rm -rf $T' 0
mkdir $T
. functions.sh
if grep -q CC < $T
if grep -q CC < $F
then
:
else
......@@ -39,18 +42,21 @@ else
exit 1
fi
if grep -q "error:" < $T
if grep -q "error:" < $F
then
print_bug $title build errors:
grep "error:" < $T
grep "error:" < $F
exit 2
fi
exit 0
if egrep -q "rcu[^/]*\.c.*warning:|rcu.*\.h.*warning:" < $T
grep warning: < $F > $T/warnings
grep "include/linux/*rcu*\.h:" $T/warnings > $T/hwarnings
grep "kernel/rcu/[^/]*:" $T/warnings > $T/cwarnings
cat $T/hwarnings $T/cwarnings > $T/rcuwarnings
if test -s $T/rcuwarnings
then
print_warning $title build errors:
egrep "rcu[^/]*\.c.*warning:|rcu.*\.h.*warning:" < $T
cat $T/rcuwarnings
exit 2
fi
exit 0
......@@ -36,7 +36,7 @@ if grep -Pq '\x00' < $file
then
print_warning Console output contains nul bytes, old qemu still running?
fi
egrep 'Badness|WARNING:|Warn|BUG|===========|Call Trace:|Oops:' < $file | grep -v 'ODEBUG: ' | grep -v 'Warning: unable to open an initial console' > $T
egrep 'Badness|WARNING:|Warn|BUG|===========|Call Trace:|Oops:|Stall ended before state dump start' < $file | grep -v 'ODEBUG: ' | grep -v 'Warning: unable to open an initial console' > $T
if test -s $T
then
print_warning Assertion failure in $file $title
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment