Merge branches 'for-4.16/hid-quirks-cleanup/asus',...

Merge branches 'for-4.16/hid-quirks-cleanup/asus', 'for-4.16/hid-quirks-cleanup/elecom', 'for-4.16/hid-quirks-cleanup/ish', 'for-4.16/hid-quirks-cleanup/multitouch', 'for-4.16/hid-quirks-cleanup/pixart', 'for-4.16/hid-quirks-cleanup/rmi', 'for-4.16/hid-quirks-cleanup/sony' and 'for-4.16/hid-quirks-cleanup/toshiba' into for-linus

Pull assorted device driver fixes (ASUS, Elecom, Intel-ISH, Multitouch, PixArt, RMI,
Sony and Toshiba) based on top the hid-quirks revamp.

Documentation/input/multi-touch-protocol.rst

@@ -269,10 +269,11 @@ ABS_MT_ORIENTATION
     The orientation of the touching ellipse. The value should describe a signed
     quarter of a revolution clockwise around the touch center. The signed value
     range is arbitrary, but zero should be returned for an ellipse aligned with
-    the Y axis of the surface, a negative value when the ellipse is turned to
-    the left, and a positive value when the ellipse is turned to the
-    right. When completely aligned with the X axis, the range max should be
-    returned.
+    the Y axis (north) of the surface, a negative value when the ellipse is
+    turned to the left, and a positive value when the ellipse is turned to the
+    right. When aligned with the X axis in the positive direction, the range
+    max should be returned; when aligned with the X axis in the negative
+    direction, the range -max should be returned.
 
     Touch ellipsis are symmetrical by default. For devices capable of true 360
     degree orientation, the reported orientation must exceed the range max to

drivers/hid/Kconfig

@@ -280,6 +280,7 @@ config HID_ELECOM
 	---help---
 	Support for ELECOM devices:
 	  - BM084 Bluetooth Mouse
+	  - EX-G Trackball (Wired and wireless)
 	  - DEFT Trackball (Wired and wireless)
 	  - HUGE Trackball (Wired and wireless)
 

drivers/hid/hid-asus.c

@@ -26,6 +26,7 @@
  * any later version.
  */
 
+#include <linux/dmi.h>
 #include <linux/hid.h>
 #include <linux/module.h>
 #include <linux/input/mt.h>
@@ -119,6 +120,24 @@ static const struct asus_touchpad_info asus_t100ta_tp = {
 	.max_contacts = 5,
 };
 
+static const struct asus_touchpad_info asus_t100ha_tp = {
+	.max_x = 2640,
+	.max_y = 1320,
+	.res_x = 30, /* units/mm */
+	.res_y = 29, /* units/mm */
+	.contact_size = 5,
+	.max_contacts = 5,
+};
+
+static const struct asus_touchpad_info asus_t200ta_tp = {
+	.max_x = 3120,
+	.max_y = 1716,
+	.res_x = 30, /* units/mm */
+	.res_y = 28, /* units/mm */
+	.contact_size = 5,
+	.max_contacts = 5,
+};
+
 static const struct asus_touchpad_info asus_t100chi_tp = {
 	.max_x = 2640,
 	.max_y = 1320,
@@ -606,7 +625,17 @@ static int asus_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 		if (intf->altsetting->desc.bInterfaceNumber == T100_TPAD_INTF) {
 			drvdata->quirks = QUIRK_SKIP_INPUT_MAPPING;
-			drvdata->tp = &asus_t100ta_tp;
+			/*
+			 * The T100HA uses the same USB-ids as the T100TAF and
+			 * the T200TA uses the same USB-ids as the T100TA, while
+			 * both have different max x/y values as the T100TA[F].
+			 */
+			if (dmi_match(DMI_PRODUCT_NAME, "T100HAN"))
+				drvdata->tp = &asus_t100ha_tp;
+			else if (dmi_match(DMI_PRODUCT_NAME, "T200TA"))
+				drvdata->tp = &asus_t200ta_tp;
+			else
+				drvdata->tp = &asus_t100ta_tp;
 		}
 	}
 
@@ -686,9 +715,10 @@ static __u8 *asus_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		hid_info(hdev, "Fixing up Asus notebook report descriptor\n");
 		rdesc[55] = 0xdd;
 	}
-	/* For the T100TA keyboard dock */
+	/* For the T100TA/T200TA keyboard dock */
 	if (drvdata->quirks & QUIRK_T100_KEYBOARD &&
-		 *rsize == 76 && rdesc[73] == 0x81 && rdesc[74] == 0x01) {
+		 (*rsize == 76 || *rsize == 101) &&
+		 rdesc[73] == 0x81 && rdesc[74] == 0x01) {
 		hid_info(hdev, "Fixing up Asus T100 keyb report descriptor\n");
 		rdesc[74] &= ~HID_MAIN_ITEM_CONSTANT;
 	}
@@ -751,7 +781,10 @@ static const struct hid_device_id asus_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
 		USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3), QUIRK_G752_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
-		USB_DEVICE_ID_ASUSTEK_T100_KEYBOARD),
+		USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD),
+	  QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
+		USB_DEVICE_ID_ASUSTEK_T100TAF_KEYBOARD),
 	  QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_ASUS_AK1D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_ASUS_MD_5110) },

drivers/hid/hid-elecom.c

 /*
- *  HID driver for ELECOM devices.
+ *  HID driver for ELECOM devices:
+ *  - BM084 Bluetooth Mouse
+ *  - EX-G Trackball (Wired and wireless)
+ *  - DEFT Trackball (Wired and wireless)
+ *  - HUGE Trackball (Wired and wireless)
+ *
  *  Copyright (c) 2010 Richard Nauber <Richard.Nauber@gmail.com>
  *  Copyright (c) 2016 Yuxuan Shui <yshuiv7@gmail.com>
  *  Copyright (c) 2017 Diego Elio Pettenò <flameeyes@flameeyes.eu>
  *  Copyright (c) 2017 Alex Manoussakis <amanou@gnu.org>
+ *  Copyright (c) 2017 Tomasz Kramkowski <tk@the-tk.com>
  */
 
 /*
@@ -19,6 +25,34 @@
 
 #include "hid-ids.h"
 
+/*
+ * Certain ELECOM mice misreport their button count meaning that they only work
+ * correctly with the ELECOM mouse assistant software which is unavailable for
+ * Linux. A four extra INPUT reports and a FEATURE report are described by the
+ * report descriptor but it does not appear that these enable software to
+ * control what the extra buttons map to. The only simple and straightforward
+ * solution seems to involve fixing up the report descriptor.
+ *
+ * Report descriptor format:
+ * Positions 13, 15, 21 and 31 store the button bit count, button usage minimum,
+ * button usage maximum and padding bit count respectively.
+ */
+#define MOUSE_BUTTONS_MAX 8
+static void mouse_button_fixup(struct hid_device *hdev,
+			       __u8 *rdesc, unsigned int rsize,
+			       int nbuttons)
+{
+	if (rsize < 32 || rdesc[12] != 0x95 ||
+	    rdesc[14] != 0x75 || rdesc[15] != 0x01 ||
+	    rdesc[20] != 0x29 || rdesc[30] != 0x75)
+		return;
+	hid_info(hdev, "Fixing up Elecom mouse button count\n");
+	nbuttons = clamp(nbuttons, 0, MOUSE_BUTTONS_MAX);
+	rdesc[13] = nbuttons;
+	rdesc[21] = nbuttons;
+	rdesc[31] = MOUSE_BUTTONS_MAX - nbuttons;
+}
+
 static __u8 *elecom_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int *rsize)
 {
@@ -31,45 +65,15 @@ static __u8 *elecom_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 			rdesc[47] = 0x00;
 		}
 		break;
+	case USB_DEVICE_ID_ELECOM_EX_G_WIRED:
+	case USB_DEVICE_ID_ELECOM_EX_G_WIRELESS:
+		mouse_button_fixup(hdev, rdesc, *rsize, 6);
+		break;
 	case USB_DEVICE_ID_ELECOM_DEFT_WIRED:
 	case USB_DEVICE_ID_ELECOM_DEFT_WIRELESS:
 	case USB_DEVICE_ID_ELECOM_HUGE_WIRED:
 	case USB_DEVICE_ID_ELECOM_HUGE_WIRELESS:
-		/* The DEFT/HUGE trackball has eight buttons, but its descriptor
-		 * only reports five, disabling the three Fn buttons on the top
-		 * of the mouse.
-		 *
-		 * Apply the following diff to the descriptor:
-		 *
-		 * Collection (Physical),              Collection (Physical),
-		 *     Report ID (1),                      Report ID (1),
-		 *     Report Count (5),           ->      Report Count (8),
-		 *     Report Size (1),                    Report Size (1),
-		 *     Usage Page (Button),                Usage Page (Button),
-		 *     Usage Minimum (01h),                Usage Minimum (01h),
-		 *     Usage Maximum (05h),        ->      Usage Maximum (08h),
-		 *     Logical Minimum (0),                Logical Minimum (0),
-		 *     Logical Maximum (1),                Logical Maximum (1),
-		 *     Input (Variable),                   Input (Variable),
-		 *     Report Count (1),           ->      Report Count (0),
-		 *     Report Size (3),                    Report Size (3),
-		 *     Input (Constant),                   Input (Constant),
-		 *     Report Size (16),                   Report Size (16),
-		 *     Report Count (2),                   Report Count (2),
-		 *     Usage Page (Desktop),               Usage Page (Desktop),
-		 *     Usage (X),                          Usage (X),
-		 *     Usage (Y),                          Usage (Y),
-		 *     Logical Minimum (-32768),           Logical Minimum (-32768),
-		 *     Logical Maximum (32767),            Logical Maximum (32767),
-		 *     Input (Variable, Relative),         Input (Variable, Relative),
-		 * End Collection,                     End Collection,
-		 */
-		if (*rsize == 213 && rdesc[13] == 5 && rdesc[21] == 5) {
-			hid_info(hdev, "Fixing up Elecom DEFT/HUGE Fn buttons\n");
-			rdesc[13] = 8; /* Button/Variable Report Count */
-			rdesc[21] = 8; /* Button/Variable Usage Maximum */
-			rdesc[29] = 0; /* Button/Constant Report Count */
-		}
+		mouse_button_fixup(hdev, rdesc, *rsize, 8);
 		break;
 	}
 	return rdesc;
@@ -77,6 +81,8 @@ static __u8 *elecom_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 
 static const struct hid_device_id elecom_devices[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_EX_G_WIRED) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_EX_G_WIRELESS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_DEFT_WIRED) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_DEFT_WIRELESS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_HUGE_WIRED) },

drivers/hid/hid-ids.h

@@ -178,7 +178,8 @@
 #define USB_VENDOR_ID_ASUSTEK		0x0b05
 #define USB_DEVICE_ID_ASUSTEK_LCM	0x1726
 #define USB_DEVICE_ID_ASUSTEK_LCM2	0x175b
-#define USB_DEVICE_ID_ASUSTEK_T100_KEYBOARD	0x17e0
+#define USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD	0x17e0
+#define USB_DEVICE_ID_ASUSTEK_T100TAF_KEYBOARD	0x1807
 #define USB_DEVICE_ID_ASUSTEK_T100CHI_KEYBOARD	0x8502
 #define USB_DEVICE_ID_ASUSTEK_T304_KEYBOARD	0x184a
 #define USB_DEVICE_ID_ASUSTEK_I2C_KEYBOARD	0x8585
@@ -370,6 +371,8 @@
 
 #define USB_VENDOR_ID_ELECOM		0x056e
 #define USB_DEVICE_ID_ELECOM_BM084	0x0061
+#define USB_DEVICE_ID_ELECOM_EX_G_WIRED	0x00fb
+#define USB_DEVICE_ID_ELECOM_EX_G_WIRELESS	0x00fc
 #define USB_DEVICE_ID_ELECOM_DEFT_WIRED	0x00fe
 #define USB_DEVICE_ID_ELECOM_DEFT_WIRELESS	0x00ff
 #define USB_DEVICE_ID_ELECOM_HUGE_WIRED	0x010c
@@ -535,6 +538,7 @@
 #define USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0A4A	0x0a4a
 #define USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0B4A	0x0b4a
 #define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE		0x134a
+#define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_094A	0x094a
 
 #define USB_VENDOR_ID_HUION		0x256c
 #define USB_DEVICE_ID_HUION_TABLET	0x006e
@@ -1156,6 +1160,7 @@
 #define USB_VENDOR_ID_PRIMAX	0x0461
 #define USB_DEVICE_ID_PRIMAX_MOUSE_4D22	0x4d22
 #define USB_DEVICE_ID_PRIMAX_KEYBOARD	0x4e05
+#define USB_DEVICE_ID_PRIMAX_REZEL	0x4e72
 
 
 #define USB_VENDOR_ID_RISO_KAGAKU	0x1294	/* Riso Kagaku Corp. */

drivers/hid/hid-multitouch.c

@@ -85,11 +85,12 @@ MODULE_LICENSE("GPL");
 #define MT_IO_FLAGS_PENDING_SLOTS	2
 
 struct mt_slot {
-	__s32 x, y, cx, cy, p, w, h;
+	__s32 x, y, cx, cy, p, w, h, a;
 	__s32 contactid;	/* the device ContactID assigned to this slot */
 	bool touch_state;	/* is the touch valid? */
 	bool inrange_state;	/* is the finger in proximity of the sensor? */
 	bool confidence_state;  /* is the touch made by a finger? */
+	bool has_azimuth;       /* the contact reports azimuth */
 };
 
 struct mt_class {
@@ -119,6 +120,10 @@ struct mt_device {
 	unsigned long mt_io_flags;	/* mt flags (MT_IO_FLAGS_*) */
 	int cc_index;	/* contact count field index in the report */
 	int cc_value_index;	/* contact count value index in the field */
+	int scantime_index;	/* scantime field index in the report */
+	int scantime_val_index;	/* scantime value index in the field */
+	int prev_scantime;	/* scantime reported in the previous packet */
+	int left_button_state;	/* left button state */
 	unsigned last_slot_field;	/* the last field of a slot */
 	unsigned mt_report_id;	/* the report ID of the multitouch device */
 	unsigned long initial_quirks;	/* initial quirks state */
@@ -582,8 +587,15 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 			if (!(cls->quirks & MT_QUIRK_NO_AREA)) {
 				set_abs(hi->input, ABS_MT_TOUCH_MINOR, field,
 					cls->sn_height);
-				input_set_abs_params(hi->input,
-					ABS_MT_ORIENTATION, 0, 1, 0, 0);
+
+				/*
+				 * Only set ABS_MT_ORIENTATION if it is not
+				 * already set by the HID_DG_AZIMUTH usage.
+				 */
+				if (!test_bit(ABS_MT_ORIENTATION,
+						hi->input->absbit))
+					input_set_abs_params(hi->input,
+						ABS_MT_ORIENTATION, 0, 1, 0, 0);
 			}
 			mt_store_field(usage, td, hi);
 			return 1;
@@ -599,6 +611,12 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 				EV_MSC, MSC_TIMESTAMP);
 			input_set_capability(hi->input, EV_MSC, MSC_TIMESTAMP);
 			mt_store_field(usage, td, hi);
+			/* Ignore if indexes are out of bounds. */
+			if (field->index >= field->report->maxfield ||
+			    usage->usage_index >= field->report_count)
+				return 1;
+			td->scantime_index = field->index;
+			td->scantime_val_index = usage->usage_index;
 			return 1;
 		case HID_DG_CONTACTCOUNT:
 			/* Ignore if indexes are out of bounds. */
@@ -608,6 +626,21 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 			td->cc_index = field->index;
 			td->cc_value_index = usage->usage_index;
 			return 1;
+		case HID_DG_AZIMUTH:
+			hid_map_usage(hi, usage, bit, max,
+				EV_ABS, ABS_MT_ORIENTATION);
+			/*
+			 * Azimuth has the range of [0, MAX) representing a full
+			 * revolution. Set ABS_MT_ORIENTATION to a quarter of
+			 * MAX according the definition of ABS_MT_ORIENTATION
+			 */
+			input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
+				-field->logical_maximum / 4,
+				field->logical_maximum / 4,
+				cls->sn_move ?
+				field->logical_maximum / cls->sn_move : 0, 0);
+			mt_store_field(usage, td, hi);
+			return 1;
 		case HID_DG_CONTACTMAX:
 			/* we don't set td->last_slot_field as contactcount and
 			 * contact max are global to the report */
@@ -700,6 +733,10 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input)
 			int wide = (s->w > s->h);
 			int major = max(s->w, s->h);
 			int minor = min(s->w, s->h);
+			int orientation = wide;
+
+			if (s->has_azimuth)
+				orientation = s->a;
 
 			/*
 			 * divided by two to match visual scale of touch
@@ -716,7 +753,8 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input)
 			input_event(input, EV_ABS, ABS_MT_TOOL_Y, s->cy);
 			input_event(input, EV_ABS, ABS_MT_DISTANCE,
 				!s->touch_state);
-			input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
+			input_event(input, EV_ABS, ABS_MT_ORIENTATION,
+				orientation);
 			input_event(input, EV_ABS, ABS_MT_PRESSURE, s->p);
 			input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
 			input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
@@ -734,10 +772,16 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input)
  */
 static void mt_sync_frame(struct mt_device *td, struct input_dev *input)
 {
+	__s32 cls = td->mtclass.name;
+
+	if (cls == MT_CLS_WIN_8 || cls == MT_CLS_WIN_8_DUAL)
+		input_event(input, EV_KEY, BTN_LEFT, td->left_button_state);
+
 	input_mt_sync_frame(input);
 	input_event(input, EV_MSC, MSC_TIMESTAMP, td->timestamp);
 	input_sync(input);
 	td->num_received = 0;
+	td->left_button_state = 0;
 	if (test_bit(MT_IO_FLAGS_ACTIVE_SLOTS, &td->mt_io_flags))
 		set_bit(MT_IO_FLAGS_PENDING_SLOTS, &td->mt_io_flags);
 	else
@@ -778,9 +822,11 @@ static int mt_touch_event(struct hid_device *hid, struct hid_field *field,
 }
 
 static void mt_process_mt_event(struct hid_device *hid, struct hid_field *field,
-				struct hid_usage *usage, __s32 value)
+				struct hid_usage *usage, __s32 value,
+				bool first_packet)
 {
 	struct mt_device *td = hid_get_drvdata(hid);
+	__s32 cls = td->mtclass.name;
 	__s32 quirks = td->mtclass.quirks;
 	struct input_dev *input = field->hidinput->input;
 
@@ -832,11 +878,49 @@ static void mt_process_mt_event(struct hid_device *hid, struct hid_field *field,
 			break;
 		case HID_DG_CONTACTCOUNT:
 			break;
+		case HID_DG_AZIMUTH:
+			/*
+			 * Azimuth is counter-clockwise and ranges from [0, MAX)
+			 * (a full revolution). Convert it to clockwise ranging
+			 * [-MAX/2, MAX/2].
+			 *
+			 * Note that ABS_MT_ORIENTATION require us to report
+			 * the limit of [-MAX/4, MAX/4], but the value can go
+			 * out of range to [-MAX/2, MAX/2] to report an upside
+			 * down ellipsis.
+			 */
+			if (value > field->logical_maximum / 2)
+				value -= field->logical_maximum;
+			td->curdata.a = -value;
+			td->curdata.has_azimuth = true;
+			break;
 		case HID_DG_TOUCH:
 			/* do nothing */
 			break;
 
 		default:
+			/*
+			 * For Win8 PTP touchpads we should only look at
+			 * non finger/touch events in the first_packet of
+			 * a (possible) multi-packet frame.
+			 */
+			if ((cls == MT_CLS_WIN_8 || cls == MT_CLS_WIN_8_DUAL) &&
+			    !first_packet)
+				return;
+
+			/*
+			 * For Win8 PTP touchpads we map both the clickpad click
+			 * and any "external" left buttons to BTN_LEFT if a
+			 * device claims to have both we need to report 1 for
+			 * BTN_LEFT if either is pressed, so we or all values
+			 * together and report the result in mt_sync_frame().
+			 */
+			if ((cls == MT_CLS_WIN_8 || cls == MT_CLS_WIN_8_DUAL) &&
+			    usage->type == EV_KEY && usage->code == BTN_LEFT) {
+				td->left_button_state |= value;
+				return;
+			}
+
 			if (usage->type)
 				input_event(input, usage->type, usage->code,
 						value);
@@ -855,9 +939,11 @@ static void mt_process_mt_event(struct hid_device *hid, struct hid_field *field,
 static void mt_touch_report(struct hid_device *hid, struct hid_report *report)
 {
 	struct mt_device *td = hid_get_drvdata(hid);
+	__s32 cls = td->mtclass.name;
 	struct hid_field *field;
+	bool first_packet;
 	unsigned count;
-	int r, n;
+	int r, n, scantime = 0;
 
 	/* sticky fingers release in progress, abort */
 	if (test_and_set_bit(MT_IO_FLAGS_RUNNING, &td->mt_io_flags))
@@ -867,13 +953,31 @@ static void mt_touch_report(struct hid_device *hid, struct hid_report *report)
 	 * Includes multi-packet support where subsequent
 	 * packets are sent with zero contactcount.
 	 */
+	if (td->scantime_index >= 0) {
+		field = report->field[td->scantime_index];
+		scantime = field->value[td->scantime_val_index];
+	}
 	if (td->cc_index >= 0) {
 		struct hid_field *field = report->field[td->cc_index];
 		int value = field->value[td->cc_value_index];
-		if (value)
+
+		/*
+		 * For Win8 PTPs the first packet (td->num_received == 0) may
+		 * have a contactcount of 0 if there only is a button event.
+		 * We double check that this is not a continuation packet
+		 * of a possible multi-packet frame be checking that the
+		 * timestamp has changed.
+		 */
+		if ((cls == MT_CLS_WIN_8 || cls == MT_CLS_WIN_8_DUAL) &&
+		    td->num_received == 0 && td->prev_scantime != scantime)
+			td->num_expected = value;
+		/* A non 0 contact count always indicates a first packet */
+		else if (value)
 			td->num_expected = value;
 	}
+	td->prev_scantime = scantime;
 
+	first_packet = td->num_received == 0;
 	for (r = 0; r < report->maxfield; r++) {
 		field = report->field[r];
 		count = field->report_count;
@@ -883,7 +987,7 @@ static void mt_touch_report(struct hid_device *hid, struct hid_report *report)
 
 		for (n = 0; n < count; n++)
 			mt_process_mt_event(hid, field, &field->usage[n],
-					field->value[n]);
+					    field->value[n], first_packet);
 	}
 
 	if (td->num_received >= td->num_expected)
@@ -1329,6 +1433,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	td->maxcontact_report_id = -1;
 	td->inputmode_value = MT_INPUTMODE_TOUCHSCREEN;
 	td->cc_index = -1;
+	td->scantime_index = -1;
 	td->mt_report_id = -1;
 	hid_set_drvdata(hdev, td);
 
@@ -1649,14 +1754,6 @@ static const struct hid_device_id mt_devices[] = {
 		MT_USB_DEVICE(USB_VENDOR_ID_TURBOX,
 			USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) },
 
-	/* Panasonic panels */
-	{ .driver_data = MT_CLS_PANASONIC,
-		MT_USB_DEVICE(USB_VENDOR_ID_PANASONIC,
-			USB_DEVICE_ID_PANABOARD_UBT780) },
-	{ .driver_data = MT_CLS_PANASONIC,
-		MT_USB_DEVICE(USB_VENDOR_ID_PANASONIC,
-			USB_DEVICE_ID_PANABOARD_UBT880) },
-
 	/* Novatek Panel */
 	{ .driver_data = MT_CLS_NSMU,
 		MT_USB_DEVICE(USB_VENDOR_ID_NOVATEK,
@@ -1667,6 +1764,14 @@ static const struct hid_device_id mt_devices[] = {
 		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
 			USB_VENDOR_ID_NTRIG, 0x1b05) },
 
+	/* Panasonic panels */
+	{ .driver_data = MT_CLS_PANASONIC,
+		MT_USB_DEVICE(USB_VENDOR_ID_PANASONIC,
+			USB_DEVICE_ID_PANABOARD_UBT780) },
+	{ .driver_data = MT_CLS_PANASONIC,
+		MT_USB_DEVICE(USB_VENDOR_ID_PANASONIC,
+			USB_DEVICE_ID_PANABOARD_UBT880) },
+
 	/* PixArt optical touch screen */
 	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
 		MT_USB_DEVICE(USB_VENDOR_ID_PIXART,

drivers/hid/hid-quirks.c

@@ -90,6 +90,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0A4A), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0B4A), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_094A), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM, USB_DEVICE_ID_IDEACOM_IDC6680), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_INNOMEDIA, USB_DEVICE_ID_INNEX_GENESIS_ATARI), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X), HID_QUIRK_MULTI_INPUT },
@@ -284,7 +285,6 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_T100_KEYBOARD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_JESS, USB_DEVICE_ID_ASUS_MD_5112) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_ASUS_MD_5110) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_T100CHI_KEYBOARD) },
@@ -335,6 +335,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
 #endif
 #if IS_ENABLED(CONFIG_HID_ELECOM)
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_EX_G_WIRED) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_EX_G_WIRELESS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_DEFT_WIRED) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_DEFT_WIRELESS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_HUGE_WIRED) },
@@ -561,6 +563,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 #if IS_ENABLED(CONFIG_HID_RMI)
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_REZEL) },
 #endif
 #if IS_ENABLED(CONFIG_HID_ROCCAT)
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ARVO) },
@@ -730,7 +733,6 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0400) },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0401) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
@@ -998,6 +1000,17 @@ bool hid_ignore(struct hid_device *hdev)
 		    strncmp(hdev->name, "www.masterkit.ru MA901", 22) == 0)
 			return true;
 		break;
+	case USB_VENDOR_ID_ELAN:
+		/*
+		 * Many Elan devices have a product id of 0x0401 and are handled
+		 * by the elan_i2c input driver. But the ACPI HID ELAN0800 dev
+		 * is not (and cannot be) handled by that driver ->
+		 * Ignore all 0x0401 devs except for the ELAN0800 dev.
+		 */
+		if (hdev->product == 0x0401 &&
+		    strncmp(hdev->name, "ELAN0800", 8) != 0)
+			return true;
+		break;
 	}
 
 	if (hdev->type == HID_TYPE_USBMOUSE &&

drivers/hid/hid-rmi.c

@@ -731,6 +731,7 @@ static const struct hid_device_id rmi_id[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14),
 		.driver_data = RMI_DEVICE_HAS_PHYS_BUTTONS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_REZEL) },
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) },
 	{ }
 };

drivers/hid/hid-sony.c

@@ -473,6 +473,7 @@ struct motion_output_report_02 {
 #define DS4_FEATURE_REPORT_0x02_SIZE 37
 #define DS4_FEATURE_REPORT_0x05_SIZE 41
 #define DS4_FEATURE_REPORT_0x81_SIZE 7
+#define DS4_FEATURE_REPORT_0xA3_SIZE 49
 #define DS4_INPUT_REPORT_0x11_SIZE 78
 #define DS4_OUTPUT_REPORT_0x05_SIZE 32
 #define DS4_OUTPUT_REPORT_0x11_SIZE 78
@@ -544,6 +545,8 @@ struct sony_sc {
 	struct power_supply *battery;
 	struct power_supply_desc battery_desc;
 	int device_id;
+	unsigned fw_version;
+	unsigned hw_version;
 	u8 *output_report_dmabuf;
 
 #ifdef CONFIG_SONY_FF
@@ -627,6 +630,29 @@ static ssize_t ds4_store_poll_interval(struct device *dev,
 static DEVICE_ATTR(bt_poll_interval, 0644, ds4_show_poll_interval,
 		ds4_store_poll_interval);
 
+static ssize_t sony_show_firmware_version(struct device *dev,
+				struct device_attribute
+				*attr, char *buf)
+{
+	struct hid_device *hdev = to_hid_device(dev);
+	struct sony_sc *sc = hid_get_drvdata(hdev);
+
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n", sc->fw_version);
+}
+
+static DEVICE_ATTR(firmware_version, 0444, sony_show_firmware_version, NULL);
+
+static ssize_t sony_show_hardware_version(struct device *dev,
+				struct device_attribute
+				*attr, char *buf)
+{
+	struct hid_device *hdev = to_hid_device(dev);
+	struct sony_sc *sc = hid_get_drvdata(hdev);
+
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n", sc->hw_version);
+}
+
+static DEVICE_ATTR(hardware_version, 0444, sony_show_hardware_version, NULL);
 
 static u8 *motion_fixup(struct hid_device *hdev, u8 *rdesc,
 			     unsigned int *rsize)
@@ -1646,6 +1672,31 @@ static void dualshock4_calibration_work(struct work_struct *work)
 	spin_unlock_irqrestore(&sc->lock, flags);
 }
 
+static int dualshock4_get_version_info(struct sony_sc *sc)
+{
+	u8 *buf;
+	int ret;
+
+	buf = kmalloc(DS4_FEATURE_REPORT_0xA3_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = hid_hw_raw_request(sc->hdev, 0xA3, buf,
+				 DS4_FEATURE_REPORT_0xA3_SIZE,
+				 HID_FEATURE_REPORT,
+				 HID_REQ_GET_REPORT);
+	if (ret < 0) {
+		kfree(buf);
+		return ret;
+	}
+
+	sc->hw_version = get_unaligned_le16(&buf[35]);
+	sc->fw_version = get_unaligned_le16(&buf[41]);
+
+	kfree(buf);
+	return 0;
+}
+
 static void sixaxis_set_leds_from_id(struct sony_sc *sc)
 {
 	static const u8 sixaxis_leds[10][4] = {
@@ -2619,6 +2670,28 @@ static int sony_input_configured(struct hid_device *hdev,
 			goto err_stop;
 		}
 
+		ret = dualshock4_get_version_info(sc);
+		if (ret < 0) {
+			hid_err(sc->hdev, "Failed to get version data from Dualshock 4\n");
+			goto err_stop;
+		}
+
+		ret = device_create_file(&sc->hdev->dev, &dev_attr_firmware_version);
+		if (ret) {
+			/* Make zero for cleanup reasons of sysfs entries. */
+			sc->fw_version = 0;
+			sc->hw_version = 0;
+			hid_err(sc->hdev, "can't create sysfs firmware_version attribute err: %d\n", ret);
+			goto err_stop;
+		}
+
+		ret = device_create_file(&sc->hdev->dev, &dev_attr_hardware_version);
+		if (ret) {
+			sc->hw_version = 0;
+			hid_err(sc->hdev, "can't create sysfs hardware_version attribute err: %d\n", ret);
+			goto err_stop;
+		}
+
 		/*
 		 * The Dualshock 4 touchpad supports 2 touches and has a
 		 * resolution of 1920x942 (44.86 dots/mm).
@@ -2695,6 +2768,10 @@ static int sony_input_configured(struct hid_device *hdev,
 	 */
 	if (sc->ds4_bt_poll_interval)
 		device_remove_file(&sc->hdev->dev, &dev_attr_bt_poll_interval);
+	if (sc->fw_version)
+		device_remove_file(&sc->hdev->dev, &dev_attr_firmware_version);
+	if (sc->hw_version)
+		device_remove_file(&sc->hdev->dev, &dev_attr_hardware_version);
 	if (sc->quirks & SONY_LED_SUPPORT)
 		sony_leds_remove(sc);
 	if (sc->quirks & SONY_BATTERY_SUPPORT)
@@ -2796,6 +2873,12 @@ static void sony_remove(struct hid_device *hdev)
 	if (sc->quirks & DUALSHOCK4_CONTROLLER_BT)
 		device_remove_file(&sc->hdev->dev, &dev_attr_bt_poll_interval);
 
+	if (sc->fw_version)
+		device_remove_file(&sc->hdev->dev, &dev_attr_firmware_version);
+
+	if (sc->hw_version)
+		device_remove_file(&sc->hdev->dev, &dev_attr_hardware_version);
+
 	sony_cancel_work_sync(sc);
 
 	kfree(sc->output_report_dmabuf);

drivers/hid/intel-ish-hid/ipc/hw-ish.h

@@ -28,6 +28,7 @@
 #define SPT_Ax_DEVICE_ID	0x9D35
 #define CNL_Ax_DEVICE_ID	0x9DFC
 #define GLK_Ax_DEVICE_ID	0x31A2
+#define CNL_H_DEVICE_ID		0xA37C
 
 #define	REVISION_ID_CHT_A0	0x6
 #define	REVISION_ID_CHT_Ax_SI	0x0

drivers/hid/intel-ish-hid/ipc/pci-ish.c

@@ -37,6 +37,7 @@ static const struct pci_device_id ish_pci_tbl[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, SPT_Ax_DEVICE_ID)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CNL_Ax_DEVICE_ID)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, GLK_Ax_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CNL_H_DEVICE_ID)},
 	{0, }
 };
 MODULE_DEVICE_TABLE(pci, ish_pci_tbl);

include/linux/hid.h

@@ -281,6 +281,7 @@ struct hid_item {
 
 #define HID_DG_DEVICECONFIG	0x000d000e
 #define HID_DG_DEVICESETTINGS	0x000d0023
+#define HID_DG_AZIMUTH		0x000d003f
 #define HID_DG_CONFIDENCE	0x000d0047
 #define HID_DG_WIDTH		0x000d0048
 #define HID_DG_HEIGHT		0x000d0049