drm/bridge: tc358767: fix output H/V syncs

The H and V syncs of the DP output are always set to active high. This
patch fixes the syncs by configuring them according to the videomode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.com

drivers/gpu/drm/bridge/tc358767.c

@@ -98,6 +98,8 @@
 #define DP0_STARTVAL		0x064c
 #define DP0_ACTIVEVAL		0x0650
 #define DP0_SYNCVAL		0x0654
+#define SYNCVAL_HS_POL_ACTIVE_LOW	(1 << 15)
+#define SYNCVAL_VS_POL_ACTIVE_LOW	(1 << 31)
 #define DP0_MISC		0x0658
 #define TU_SIZE_RECOMMENDED		(63) /* LSCLK cycles per TU */
 #define BPC_6				(0 << 5)
@@ -726,7 +728,9 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
 
 	tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
 
-	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0));
+	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) |
+		 ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? SYNCVAL_HS_POL_ACTIVE_LOW : 0) |
+		 ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? SYNCVAL_VS_POL_ACTIVE_LOW : 0));
 
 	tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
 		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);