Commit 7a56b81c authored by Ralf Ramsauer's avatar Ralf Ramsauer Committed by Borislav Petkov

x86/jailhouse: Only enable platform UARTs if available

ACPI tables aren't available if Linux runs as guest of the hypervisor
Jailhouse. This makes the 8250 driver probe for all platform UARTs as it
assumes that all UARTs are present in case of !ACPI. Jailhouse will stop
execution of Linux guest due to port access violation.

So far, these access violations were solved by tuning the 8250.nr_uarts
cmdline parameter, but this has limitations: Only consecutive platform
UARTs can be mapped to Linux, and only in the sequence 0x3f8, 0x2f8,
0x3e8, 0x2e8.

Beginning from setup_data version 2, Jailhouse will place information of
available platform UARTs in setup_data. This allows for selective
activation of platform UARTs.

Query setup_data version and only activate available UARTS. This
patch comes with backward compatibility, and will still support older
setup_data versions. In case of older setup_data versions, Linux falls
back to the old behaviour.
Signed-off-by: default avatarRalf Ramsauer <ralf.ramsauer@oth-regensburg.de>
Signed-off-by: default avatarBorislav Petkov <bp@suse.de>
Reviewed-by: default avatarJan Kiszka <jan.kiszka@siemens.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: jailhouse-dev@googlegroups.com
Cc: Juergen Gross <jgross@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191010102102.421035-3-ralf.ramsauer@oth-regensburg.de
parent 0935e5f7
......@@ -152,6 +152,9 @@ struct jailhouse_setup_data {
__u8 standard_ioapic;
__u8 cpu_ids[255];
} __attribute__((packed)) v1;
struct {
__u32 flags;
} __attribute__((packed)) v2;
} __attribute__((packed));
/* The so-called "zeropage" */
......
......@@ -11,6 +11,7 @@
#include <linux/acpi_pmtmr.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/serial_8250.h>
#include <asm/apic.h>
#include <asm/cpu.h>
#include <asm/hypervisor.h>
......@@ -21,11 +22,24 @@
#include <asm/setup.h>
#include <asm/jailhouse_para.h>
static __initdata struct jailhouse_setup_data setup_data;
static struct jailhouse_setup_data setup_data;
#define SETUP_DATA_V1_LEN (sizeof(setup_data.hdr) + sizeof(setup_data.v1))
#define SETUP_DATA_V2_LEN (SETUP_DATA_V1_LEN + sizeof(setup_data.v2))
static unsigned int precalibrated_tsc_khz;
static void jailhouse_setup_irq(unsigned int irq)
{
struct mpc_intsrc mp_irq = {
.type = MP_INTSRC,
.irqtype = mp_INT,
.irqflag = MP_IRQPOL_ACTIVE_HIGH | MP_IRQTRIG_EDGE,
.srcbusirq = irq,
.dstirq = irq,
};
mp_save_irq(&mp_irq);
}
static uint32_t jailhouse_cpuid_base(void)
{
if (boot_cpu_data.cpuid_level < 0 ||
......@@ -79,11 +93,6 @@ static void __init jailhouse_get_smp_config(unsigned int early)
.type = IOAPIC_DOMAIN_STRICT,
.ops = &mp_ioapic_irqdomain_ops,
};
struct mpc_intsrc mp_irq = {
.type = MP_INTSRC,
.irqtype = mp_INT,
.irqflag = MP_IRQPOL_ACTIVE_HIGH | MP_IRQTRIG_EDGE,
};
unsigned int cpu;
jailhouse_x2apic_init();
......@@ -100,12 +109,12 @@ static void __init jailhouse_get_smp_config(unsigned int early)
if (setup_data.v1.standard_ioapic) {
mp_register_ioapic(0, 0xfec00000, gsi_top, &ioapic_cfg);
/* Register 1:1 mapping for legacy UART IRQs 3 and 4 */
mp_irq.srcbusirq = mp_irq.dstirq = 3;
mp_save_irq(&mp_irq);
mp_irq.srcbusirq = mp_irq.dstirq = 4;
mp_save_irq(&mp_irq);
if (IS_ENABLED(CONFIG_SERIAL_8250) &&
setup_data.hdr.version < 2) {
/* Register 1:1 mapping for legacy UART IRQs 3 and 4 */
jailhouse_setup_irq(3);
jailhouse_setup_irq(4);
}
}
}
......@@ -138,6 +147,53 @@ static int __init jailhouse_pci_arch_init(void)
return 0;
}
#ifdef CONFIG_SERIAL_8250
static inline bool jailhouse_uart_enabled(unsigned int uart_nr)
{
return setup_data.v2.flags & BIT(uart_nr);
}
static void jailhouse_serial_fixup(int port, struct uart_port *up,
u32 *capabilities)
{
static const u16 pcuart_base[] = {0x3f8, 0x2f8, 0x3e8, 0x2e8};
unsigned int n;
for (n = 0; n < ARRAY_SIZE(pcuart_base); n++) {
if (pcuart_base[n] != up->iobase)
continue;
if (jailhouse_uart_enabled(n)) {
pr_info("Enabling UART%u (port 0x%lx)\n", n,
up->iobase);
jailhouse_setup_irq(up->irq);
} else {
/* Deactivate UART if access isn't allowed */
up->iobase = 0;
}
break;
}
}
static void __init jailhouse_serial_workaround(void)
{
/*
* There are flags inside setup_data that indicate availability of
* platform UARTs since setup data version 2.
*
* In case of version 1, we don't know which UARTs belong Linux. In
* this case, unconditionally register 1:1 mapping for legacy UART IRQs
* 3 and 4.
*/
if (setup_data.hdr.version > 1)
serial8250_set_isa_configurator(jailhouse_serial_fixup);
}
#else /* !CONFIG_SERIAL_8250 */
static inline void jailhouse_serial_workaround(void)
{
}
#endif /* CONFIG_SERIAL_8250 */
static void __init jailhouse_init_platform(void)
{
u64 pa_data = boot_params.hdr.setup_data;
......@@ -189,7 +245,8 @@ static void __init jailhouse_init_platform(void)
if (setup_data.hdr.version == 0 ||
setup_data.hdr.compatible_version !=
JAILHOUSE_SETUP_REQUIRED_VERSION ||
(setup_data.hdr.version >= 1 && header.len < SETUP_DATA_V1_LEN))
(setup_data.hdr.version == 1 && header.len < SETUP_DATA_V1_LEN) ||
(setup_data.hdr.version >= 2 && header.len < SETUP_DATA_V2_LEN))
goto unsupported;
pmtmr_ioport = setup_data.v1.pm_timer_address;
......@@ -205,6 +262,8 @@ static void __init jailhouse_init_platform(void)
* are none in a non-root cell.
*/
disable_acpi();
jailhouse_serial_workaround();
return;
unsupported:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment