Merge branch 'pm-runtime' into for-linus

* pm-runtime:
  OMAP: PM: disable idle on suspend for GPIO and UART
  OMAP: PM: omap_device: add API to disable idle on suspend
  OMAP: PM: omap_device: add system PM methods for PM domain handling
  OMAP: PM: omap_device: conditionally use PM domain runtime helpers
  PM / Runtime: Add new helper function: pm_runtime_status_suspended()
  PM / Runtime: Consistent utilization of deferred_resume
  PM / Runtime: Prevent runtime_resume from racing with probe
  PM / Runtime: Replace "run-time" with "runtime" in documentation
  PM / Runtime: Improve documentation of enable, disable and barrier
  PM: Limit race conditions between runtime PM and system sleep (v2)
  PCI / PM: Detect early wakeup in pci_pm_prepare()
  PM / Runtime: Return special error code if runtime PM is disabled
  PM / Runtime: Update documentation of interactions with system sleep

Documentation/power/devices.txt

@@ -604,7 +604,7 @@ state temporarily, for example so that its system wakeup capability can be
 disabled.  This all depends on the hardware and the design of the subsystem and
 device driver in question.
 
-During system-wide resume from a sleep state it's best to put devices into the
-full-power state, as explained in Documentation/power/runtime_pm.txt.  Refer to
-that document for more information regarding this particular issue as well as
+During system-wide resume from a sleep state it's easiest to put devices into
+the full-power state, as explained in Documentation/power/runtime_pm.txt.  Refer
+to that document for more information regarding this particular issue as well as
 for information on the device runtime power management framework in general.

arch/arm/mach-omap2/gpio.c

@@ -87,6 +87,8 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		return PTR_ERR(od);
 	}
 
+	omap_device_disable_idle_on_suspend(od);
+
 	gpio_bank_count++;
 	return 0;
 }

arch/arm/mach-omap2/serial.c

@@ -805,6 +805,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 	WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
 	     name, oh->name);
 
+	omap_device_disable_idle_on_suspend(od);
 	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
 
 	uart->irq = oh->mpu_irqs[0].irq;

arch/arm/plat-omap/include/plat/omap_device.h

@@ -44,6 +44,10 @@ extern struct device omap_device_parent;
 #define OMAP_DEVICE_STATE_IDLE		2
 #define OMAP_DEVICE_STATE_SHUTDOWN	3
 
+/* omap_device.flags values */
+#define OMAP_DEVICE_SUSPENDED BIT(0)
+#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1)
+
 /**
  * struct omap_device - omap_device wrapper for platform_devices
  * @pdev: platform_device
@@ -73,6 +77,7 @@ struct omap_device {
 	s8				pm_lat_level;
 	u8				hwmods_cnt;
 	u8				_state;
+	u8                              flags;
 };
 
 /* Device driver interface (call via platform_data fn ptrs) */
@@ -117,6 +122,10 @@ int omap_device_enable_hwmods(struct omap_device *od);
 int omap_device_disable_clocks(struct omap_device *od);
 int omap_device_enable_clocks(struct omap_device *od);
 
+static inline void omap_device_disable_idle_on_suspend(struct omap_device *od)
+{
+	od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
+}
 
 /*
  * Entries should be kept in latency order ascending

arch/arm/plat-omap/omap_device.c

@@ -537,6 +537,7 @@ int omap_early_device_register(struct omap_device *od)
 	return 0;
 }
 
+#ifdef CONFIG_PM_RUNTIME
 static int _od_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -563,13 +564,55 @@ static int _od_runtime_resume(struct device *dev)
 
 	return pm_generic_runtime_resume(dev);
 }
+#endif
+
+#ifdef CONFIG_SUSPEND
+static int _od_suspend_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od = to_omap_device(pdev);
+	int ret;
+
+	if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)
+		return pm_generic_suspend_noirq(dev);
+
+	ret = pm_generic_suspend_noirq(dev);
+
+	if (!ret && !pm_runtime_status_suspended(dev)) {
+		if (pm_generic_runtime_suspend(dev) == 0) {
+			omap_device_idle(pdev);
+			od->flags |= OMAP_DEVICE_SUSPENDED;
+		}
+	}
+
+	return ret;
+}
+
+static int _od_resume_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od = to_omap_device(pdev);
+
+	if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)
+		return pm_generic_resume_noirq(dev);
+
+	if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
+	    !pm_runtime_status_suspended(dev)) {
+		od->flags &= ~OMAP_DEVICE_SUSPENDED;
+		omap_device_enable(pdev);
+		pm_generic_runtime_resume(dev);
+	}
+
+	return pm_generic_resume_noirq(dev);
+}
+#endif
 
 static struct dev_pm_domain omap_device_pm_domain = {
 	.ops = {
-		.runtime_suspend = _od_runtime_suspend,
-		.runtime_idle = _od_runtime_idle,
-		.runtime_resume = _od_runtime_resume,
+		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
+				   _od_runtime_idle)
 		USE_PLATFORM_PM_SLEEP_OPS
+		SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
 	}
 };
 

drivers/base/power/main.c

@@ -505,6 +505,7 @@ static int legacy_resume(struct device *dev, int (*cb)(struct device *dev))
 static int device_resume(struct device *dev, pm_message_t state, bool async)
 {
 	int error = 0;
+	bool put = false;
 
 	TRACE_DEVICE(dev);
 	TRACE_RESUME(0);
@@ -521,6 +522,9 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
 	if (!dev->power.is_suspended)
 		goto Unlock;
 
+	pm_runtime_enable(dev);
+	put = true;
+
 	if (dev->pm_domain) {
 		pm_dev_dbg(dev, state, "power domain ");
 		error = pm_op(dev, &dev->pm_domain->ops, state);
@@ -563,6 +567,10 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
 	complete_all(&dev->power.completion);
 
 	TRACE_RESUME(error);
+
+	if (put)
+		pm_runtime_put_sync(dev);
+
 	return error;
 }
 
@@ -843,16 +851,22 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 	int error = 0;
 
 	dpm_wait_for_children(dev, async);
-	device_lock(dev);
 
 	if (async_error)
-		goto Unlock;
+		return 0;
+
+	pm_runtime_get_noresume(dev);
+	if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
+		pm_wakeup_event(dev, 0);
 
 	if (pm_wakeup_pending()) {
+		pm_runtime_put_sync(dev);
 		async_error = -EBUSY;
-		goto Unlock;
+		return 0;
 	}
 
+	device_lock(dev);
+
 	if (dev->pm_domain) {
 		pm_dev_dbg(dev, state, "power domain ");
 		error = pm_op(dev, &dev->pm_domain->ops, state);
@@ -890,12 +904,15 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
  End:
 	dev->power.is_suspended = !error;
 
- Unlock:
 	device_unlock(dev);
 	complete_all(&dev->power.completion);
 
-	if (error)
+	if (error) {
+		pm_runtime_put_sync(dev);
 		async_error = error;
+	} else if (dev->power.is_suspended) {
+		__pm_runtime_disable(dev, false);
+	}
 
 	return error;
 }
@@ -1035,13 +1052,7 @@ int dpm_prepare(pm_message_t state)
 		get_device(dev);
 		mutex_unlock(&dpm_list_mtx);
 
-		pm_runtime_get_noresume(dev);
-		if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
-			pm_wakeup_event(dev, 0);
-
-		pm_runtime_put_sync(dev);
-		error = pm_wakeup_pending() ?
-				-EBUSY : device_prepare(dev, state);
+		error = device_prepare(dev, state);
 
 		mutex_lock(&dpm_list_mtx);
 		if (error) {

drivers/base/power/sysfs.c

@@ -116,12 +116,14 @@ static ssize_t control_store(struct device * dev, struct device_attribute *attr,
 	cp = memchr(buf, '\n', n);
 	if (cp)
 		len = cp - buf;
+	device_lock(dev);
 	if (len == sizeof ctrl_auto - 1 && strncmp(buf, ctrl_auto, len) == 0)
 		pm_runtime_allow(dev);
 	else if (len == sizeof ctrl_on - 1 && strncmp(buf, ctrl_on, len) == 0)
 		pm_runtime_forbid(dev);
 	else
-		return -EINVAL;
+		n = -EINVAL;
+	device_unlock(dev);
 	return n;
 }
 
@@ -205,7 +207,9 @@ static ssize_t autosuspend_delay_ms_store(struct device *dev,
 	if (strict_strtol(buf, 10, &delay) != 0 || delay != (int) delay)
 		return -EINVAL;
 
+	device_lock(dev);
 	pm_runtime_set_autosuspend_delay(dev, delay);
+	device_unlock(dev);
 	return n;
 }
 

drivers/pci/pci-driver.c

@@ -18,6 +18,7 @@
 #include <linux/sched.h>
 #include <linux/cpu.h>
 #include <linux/pm_runtime.h>
+#include <linux/suspend.h>
 #include "pci.h"
 
 struct pci_dynid {
@@ -615,6 +616,21 @@ static int pci_pm_prepare(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	/*
+	 * If a PCI device configured to wake up the system from sleep states
+	 * has been suspended at run time and there's a resume request pending
+	 * for it, this is equivalent to the device signaling wakeup, so the
+	 * system suspend operation should be aborted.
+	 */
+	pm_runtime_get_noresume(dev);
+	if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
+		pm_wakeup_event(dev, 0);
+
+	if (pm_wakeup_pending()) {
+		pm_runtime_put_sync(dev);
+		return -EBUSY;
+	}
+
 	/*
 	 * PCI devices suspended at run time need to be resumed at this
 	 * point, because in general it is necessary to reconfigure them for
@@ -624,7 +640,7 @@ static int pci_pm_prepare(struct device *dev)
 	 * system from the sleep state, we'll have to prevent it from signaling
 	 * wake-up.
 	 */
-	pm_runtime_get_sync(dev);
+	pm_runtime_resume(dev);
 
 	if (drv && drv->pm && drv->pm->prepare)
 		error = drv->pm->prepare(dev);

drivers/scsi/scsi_pm.c

@@ -144,9 +144,9 @@ int scsi_autopm_get_device(struct scsi_device *sdev)
 	int	err;
 
 	err = pm_runtime_get_sync(&sdev->sdev_gendev);
-	if (err < 0)
+	if (err < 0 && err !=-EACCES)
 		pm_runtime_put_sync(&sdev->sdev_gendev);
-	else if (err > 0)
+	else
 		err = 0;
 	return err;
 }
@@ -173,9 +173,9 @@ int scsi_autopm_get_host(struct Scsi_Host *shost)
 	int	err;
 
 	err = pm_runtime_get_sync(&shost->shost_gendev);
-	if (err < 0)
+	if (err < 0 && err !=-EACCES)
 		pm_runtime_put_sync(&shost->shost_gendev);
-	else if (err > 0)
+	else
 		err = 0;
 	return err;
 }

include/linux/pm_runtime.h

@@ -82,6 +82,11 @@ static inline bool pm_runtime_suspended(struct device *dev)
 		&& !dev->power.disable_depth;
 }
 
+static inline bool pm_runtime_status_suspended(struct device *dev)
+{
+	return dev->power.runtime_status == RPM_SUSPENDED;
+}
+
 static inline bool pm_runtime_enabled(struct device *dev)
 {
 	return !dev->power.disable_depth;
@@ -130,6 +135,7 @@ static inline void pm_runtime_put_noidle(struct device *dev) {}
 static inline bool device_run_wake(struct device *dev) { return false; }
 static inline void device_set_run_wake(struct device *dev, bool enable) {}
 static inline bool pm_runtime_suspended(struct device *dev) { return false; }
+static inline bool pm_runtime_status_suspended(struct device *dev) { return false; }
 static inline bool pm_runtime_enabled(struct device *dev) { return false; }
 
 static inline int pm_generic_runtime_idle(struct device *dev) { return 0; }