Merge tag 'media/v3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "A series of fixup patches for version 4.0:

   - one VB2 core fixup, when stopping the stream;
   - one VB2 core fixup for dma-contig memory type;
   - driver fixes at rtl28xx, s5p (tv, jpeg, mfc, soc-camera, sh_veu,
     cx23885, gspca"

* tag 'media/v3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] rtl28xxu: return success for unimplemented FE callback
  [media] rtl2832: disable regmap register cache
  [media] vb2: Fix dma_dir setting for dma-contig mem type
  [media] media: s5p-mfc: fix broken pointer cast on 64bit arch
  [media] media: s5p-mfc: fix mmap support for 64bit arch
  [media] cx23885: fix querycap
  [media] sh_veu: v4l2_dev wasn't set
  [media] s5p-mfc: Fix NULL pointer dereference caused by not set q->lock
  [media] s5p-jpeg: exynos3250: fix erroneous reset procedure
  [media] s5p-tv: hdmi needs I2C support
  [media] s5p-jpeg: Initialize cb and cr to zero
  [media] media: fix gspca drivers build dependencies
  [media] soc-camera: Fix devm_kfree() in soc_of_bind()
  [media] media: atmel-isi: increase the burst length to improve the performance
  [media] vb2: fix 'UNBALANCED' warnings when calling vb2_thread_stop()

drivers/media/dvb-frontends/rtl2832.c

@@ -1240,7 +1240,7 @@ static int rtl2832_probe(struct i2c_client *client,
 	dev->regmap_config.max_register = 5 * 0x100,
 	dev->regmap_config.ranges = regmap_range_cfg,
 	dev->regmap_config.num_ranges = ARRAY_SIZE(regmap_range_cfg),
-	dev->regmap_config.cache_type = REGCACHE_RBTREE,
+	dev->regmap_config.cache_type = REGCACHE_NONE,
 	dev->regmap = regmap_init(&client->dev, &regmap_bus, client,
 				  &dev->regmap_config);
 	if (IS_ERR(dev->regmap)) {

drivers/media/pci/cx23885/cx23885-417.c

@@ -1339,14 +1339,13 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(cap->driver, dev->name, sizeof(cap->driver));
 	strlcpy(cap->card, cx23885_boards[tsport->dev->board].name,
 		sizeof(cap->card));
-	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
-	cap->capabilities =
-		V4L2_CAP_VIDEO_CAPTURE |
-		V4L2_CAP_READWRITE     |
-		V4L2_CAP_STREAMING     |
-		0;
+	sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci));
+	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+			   V4L2_CAP_STREAMING;
 	if (dev->tuner_type != TUNER_ABSENT)
-		cap->capabilities |= V4L2_CAP_TUNER;
+		cap->device_caps |= V4L2_CAP_TUNER;
+	cap->capabilities = cap->device_caps | V4L2_CAP_VBI_CAPTURE |
+		V4L2_CAP_AUDIO | V4L2_CAP_DEVICE_CAPS;
 
 	return 0;
 }

drivers/media/platform/s5p-jpeg/jpeg-core.c

@@ -1845,6 +1845,9 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
 	struct s5p_jpeg_addr jpeg_addr;
 	u32 pix_size, padding_bytes = 0;
 
+	jpeg_addr.cb = 0;
+	jpeg_addr.cr = 0;
+
 	pix_size = ctx->cap_q.w * ctx->cap_q.h;
 
 	if (ctx->mode == S5P_JPEG_ENCODE) {

drivers/media/platform/s5p-jpeg/jpeg-hw-exynos3250.c

@@ -20,7 +20,7 @@
 
 void exynos3250_jpeg_reset(void __iomem *regs)
 {
-	u32 reg = 0;
+	u32 reg = 1;
 	int count = 1000;
 
 	writel(1, regs + EXYNOS3250_SW_RESET);

drivers/media/platform/s5p-mfc/s5p_mfc.c

@@ -833,6 +833,7 @@ static int s5p_mfc_open(struct file *file)
 	q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
 	q->io_modes = VB2_MMAP;
 	q->drv_priv = &ctx->fh;
+	q->lock = &dev->mfc_mutex;
 	if (vdev == dev->vfd_dec) {
 		q->io_modes = VB2_MMAP;
 		q->ops = get_dec_queue_ops();

drivers/media/platform/s5p-mfc/s5p_mfc_common.h

@@ -29,7 +29,7 @@
 
 /* Offset base used to differentiate between CAPTURE and OUTPUT
 *  while mmaping */
-#define DST_QUEUE_OFF_BASE      (TASK_SIZE / 2)
+#define DST_QUEUE_OFF_BASE	(1 << 30)
 
 #define MFC_BANK1_ALLOC_CTX	0
 #define MFC_BANK2_ALLOC_CTX	1

drivers/media/platform/s5p-mfc/s5p_mfc_opr.h

@@ -302,7 +302,7 @@ struct s5p_mfc_hw_ops {
 	void (*write_info)(struct s5p_mfc_ctx *ctx, unsigned int data,
 			unsigned int ofs);
 	unsigned int (*read_info)(struct s5p_mfc_ctx *ctx,
-			unsigned int ofs);
+			unsigned long ofs);
 	int (*get_dspl_y_adr)(struct s5p_mfc_dev *dev);
 	int (*get_dec_y_adr)(struct s5p_mfc_dev *dev);
 	int (*get_dspl_status)(struct s5p_mfc_dev *dev);

drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c

@@ -263,15 +263,15 @@ static void s5p_mfc_release_dev_context_buffer_v5(struct s5p_mfc_dev *dev)
 static void s5p_mfc_write_info_v5(struct s5p_mfc_ctx *ctx, unsigned int data,
 			unsigned int ofs)
 {
-	writel(data, (volatile void __iomem *)(ctx->shm.virt + ofs));
+	writel(data, (void *)(ctx->shm.virt + ofs));
 	wmb();
 }
 
 static unsigned int s5p_mfc_read_info_v5(struct s5p_mfc_ctx *ctx,
-				unsigned int ofs)
+				unsigned long ofs)
 {
 	rmb();
-	return readl((volatile void __iomem *)(ctx->shm.virt + ofs));
+	return readl((void *)(ctx->shm.virt + ofs));
 }
 
 static void s5p_mfc_dec_calc_dpb_size_v5(struct s5p_mfc_ctx *ctx)

drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c

@@ -1852,17 +1852,17 @@ static void s5p_mfc_write_info_v6(struct s5p_mfc_ctx *ctx, unsigned int data,
 		unsigned int ofs)
 {
 	s5p_mfc_clock_on();
-	writel(data, (volatile void __iomem *)((unsigned long)ofs));
+	writel(data, (void *)((unsigned long)ofs));
 	s5p_mfc_clock_off();
 }
 
 static unsigned int
-s5p_mfc_read_info_v6(struct s5p_mfc_ctx *ctx, unsigned int ofs)
+s5p_mfc_read_info_v6(struct s5p_mfc_ctx *ctx, unsigned long ofs)
 {
 	int ret;
 
 	s5p_mfc_clock_on();
-	ret = readl((volatile void __iomem *)((unsigned long)ofs));
+	ret = readl((void *)ofs);
 	s5p_mfc_clock_off();
 
 	return ret;

drivers/media/platform/s5p-tv/Kconfig

@@ -20,6 +20,7 @@ if VIDEO_SAMSUNG_S5P_TV
 config VIDEO_SAMSUNG_S5P_HDMI
 	tristate "Samsung HDMI Driver"
 	depends on VIDEO_V4L2
+	depends on I2C
 	depends on VIDEO_SAMSUNG_S5P_TV
 	select VIDEO_SAMSUNG_S5P_HDMIPHY
 	help

drivers/media/platform/sh_veu.c

@@ -1158,6 +1158,7 @@ static int sh_veu_probe(struct platform_device *pdev)
 	}
 
 	*vdev = sh_veu_videodev;
+	vdev->v4l2_dev = &veu->v4l2_dev;
 	spin_lock_init(&veu->lock);
 	mutex_init(&veu->fop_lock);
 	vdev->lock = &veu->fop_lock;

drivers/media/platform/soc_camera/atmel-isi.c

@@ -843,6 +843,8 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd)
 	if (isi->pdata.full_mode)
 		cfg1 |= ISI_CFG1_FULL_MODE;
 
+	cfg1 |= ISI_CFG1_THMASK_BEATS_16;
+
 	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
 	isi_writel(isi, ISI_CFG1, cfg1);
 

drivers/media/platform/soc_camera/soc_camera.c

@@ -1665,7 +1665,7 @@ static int soc_of_bind(struct soc_camera_host *ici,
 eaddpdev:
 	platform_device_put(sasc->pdev);
 eallocpdev:
-	devm_kfree(ici->v4l2_dev.dev, sasc);
+	devm_kfree(ici->v4l2_dev.dev, info);
 	dev_err(ici->v4l2_dev.dev, "group probe failed: %d\n", ret);
 
 	return ret;

drivers/media/usb/dvb-usb-v2/rtl28xxu.c

@@ -780,8 +780,6 @@ static int rtl2832u_frontend_callback(void *adapter_priv, int component,
 		case TUNER_RTL2832_TUA9001:
 			return rtl2832u_tua9001_tuner_callback(d, cmd, arg);
 		}
-	default:
-		return -EINVAL;
 	}
 
 	return 0;

drivers/media/usb/gspca/Kconfig

 menuconfig USB_GSPCA
 	tristate "GSPCA based webcams"
 	depends on VIDEO_V4L2
+	depends on INPUT || INPUT=n
 	default m
 	---help---
 	  Say Y here if you want to enable selecting webcams based

drivers/media/v4l2-core/videobuf2-core.c

@@ -3230,18 +3230,13 @@ int vb2_thread_stop(struct vb2_queue *q)
 
 	if (threadio == NULL)
 		return 0;
-	call_void_qop(q, wait_finish, q);
 	threadio->stop = true;
-	vb2_internal_streamoff(q, q->type);
-	call_void_qop(q, wait_prepare, q);
+	/* Wake up all pending sleeps in the thread */
+	vb2_queue_error(q);
 	err = kthread_stop(threadio->thread);
-	q->fileio = NULL;
-	fileio->req.count = 0;
-	vb2_reqbufs(q, &fileio->req);
-	kfree(fileio);
+	__vb2_cleanup_fileio(q);
 	threadio->thread = NULL;
 	kfree(threadio);
-	q->fileio = NULL;
 	q->threadio = NULL;
 	return err;
 }

drivers/media/v4l2-core/videobuf2-dma-contig.c

@@ -632,8 +632,7 @@ static void *vb2_dc_get_userptr(void *alloc_ctx, unsigned long vaddr,
 	}
 
 	/* extract page list from userspace mapping */
-	ret = vb2_dc_get_user_pages(start, pages, n_pages, vma,
-				    dma_dir == DMA_FROM_DEVICE);
+	ret = vb2_dc_get_user_pages(start, pages, n_pages, vma, dma_dir);
 	if (ret) {
 		unsigned long pfn;
 		if (vb2_dc_get_user_pfn(start, n_pages, vma, &pfn) == 0) {

include/media/atmel-isi.h

@@ -59,6 +59,10 @@
 #define		ISI_CFG1_FRATE_DIV_MASK		(7 << 8)
 #define ISI_CFG1_DISCR				(1 << 11)
 #define ISI_CFG1_FULL_MODE			(1 << 12)
+/* Definition for THMASK(ISI_V2) */
+#define		ISI_CFG1_THMASK_BEATS_4		(0 << 13)
+#define		ISI_CFG1_THMASK_BEATS_8		(1 << 13)
+#define		ISI_CFG1_THMASK_BEATS_16	(2 << 13)
 
 /* Bitfields in CFG2 */
 #define ISI_CFG2_GRAYSCALE			(1 << 13)