usb: remove commented out dma wrappers

These wrappers have never seen use and have been commented out
for a long time.  Remove them for good.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20190903084615.19161-6-hch@lst.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/core/usb.c

@@ -933,228 +933,6 @@ void usb_free_coherent(struct usb_device *dev, size_t size, void *addr,
 }
 EXPORT_SYMBOL_GPL(usb_free_coherent);
 
-/**
- * usb_buffer_map - create DMA mapping(s) for an urb
- * @urb: urb whose transfer_buffer/setup_packet will be mapped
- *
- * URB_NO_TRANSFER_DMA_MAP is added to urb->transfer_flags if the operation
- * succeeds. If the device is connected to this system through a non-DMA
- * controller, this operation always succeeds.
- *
- * This call would normally be used for an urb which is reused, perhaps
- * as the target of a large periodic transfer, with usb_buffer_dmasync()
- * calls to synchronize memory and dma state.
- *
- * Reverse the effect of this call with usb_buffer_unmap().
- *
- * Return: Either %NULL (indicating no buffer could be mapped), or @urb.
- *
- */
-#if 0
-struct urb *usb_buffer_map(struct urb *urb)
-{
-	struct usb_bus		*bus;
-	struct device		*controller;
-
-	if (!urb
-			|| !urb->dev
-			|| !(bus = urb->dev->bus)
-			|| !(controller = bus->sysdev))
-		return NULL;
-
-	if (controller->dma_mask) {
-		urb->transfer_dma = dma_map_single(controller,
-			urb->transfer_buffer, urb->transfer_buffer_length,
-			usb_pipein(urb->pipe)
-				? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-	/* FIXME generic api broken like pci, can't report errors */
-	/* if (urb->transfer_dma == DMA_ADDR_INVALID) return 0; */
-	} else
-		urb->transfer_dma = ~0;
-	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-	return urb;
-}
-EXPORT_SYMBOL_GPL(usb_buffer_map);
-#endif  /*  0  */
-
-/* XXX DISABLED, no users currently.  If you wish to re-enable this
- * XXX please determine whether the sync is to transfer ownership of
- * XXX the buffer from device to cpu or vice verse, and thusly use the
- * XXX appropriate _for_{cpu,device}() method.  -DaveM
- */
-#if 0
-
-/**
- * usb_buffer_dmasync - synchronize DMA and CPU view of buffer(s)
- * @urb: urb whose transfer_buffer/setup_packet will be synchronized
- */
-void usb_buffer_dmasync(struct urb *urb)
-{
-	struct usb_bus		*bus;
-	struct device		*controller;
-
-	if (!urb
-			|| !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
-			|| !urb->dev
-			|| !(bus = urb->dev->bus)
-			|| !(controller = bus->sysdev))
-		return;
-
-	if (controller->dma_mask) {
-		dma_sync_single_for_cpu(controller,
-			urb->transfer_dma, urb->transfer_buffer_length,
-			usb_pipein(urb->pipe)
-				? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-		if (usb_pipecontrol(urb->pipe))
-			dma_sync_single_for_cpu(controller,
-					urb->setup_dma,
-					sizeof(struct usb_ctrlrequest),
-					DMA_TO_DEVICE);
-	}
-}
-EXPORT_SYMBOL_GPL(usb_buffer_dmasync);
-#endif
-
-/**
- * usb_buffer_unmap - free DMA mapping(s) for an urb
- * @urb: urb whose transfer_buffer will be unmapped
- *
- * Reverses the effect of usb_buffer_map().
- */
-#if 0
-void usb_buffer_unmap(struct urb *urb)
-{
-	struct usb_bus		*bus;
-	struct device		*controller;
-
-	if (!urb
-			|| !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
-			|| !urb->dev
-			|| !(bus = urb->dev->bus)
-			|| !(controller = bus->sysdev))
-		return;
-
-	if (controller->dma_mask) {
-		dma_unmap_single(controller,
-			urb->transfer_dma, urb->transfer_buffer_length,
-			usb_pipein(urb->pipe)
-				? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-	}
-	urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP;
-}
-EXPORT_SYMBOL_GPL(usb_buffer_unmap);
-#endif  /*  0  */
-
-#if 0
-/**
- * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint
- * @dev: device to which the scatterlist will be mapped
- * @is_in: mapping transfer direction
- * @sg: the scatterlist to map
- * @nents: the number of entries in the scatterlist
- *
- * Return: Either < 0 (indicating no buffers could be mapped), or the
- * number of DMA mapping array entries in the scatterlist.
- *
- * Note:
- * The caller is responsible for placing the resulting DMA addresses from
- * the scatterlist into URB transfer buffer pointers, and for setting the
- * URB_NO_TRANSFER_DMA_MAP transfer flag in each of those URBs.
- *
- * Top I/O rates come from queuing URBs, instead of waiting for each one
- * to complete before starting the next I/O.   This is particularly easy
- * to do with scatterlists.  Just allocate and submit one URB for each DMA
- * mapping entry returned, stopping on the first error or when all succeed.
- * Better yet, use the usb_sg_*() calls, which do that (and more) for you.
- *
- * This call would normally be used when translating scatterlist requests,
- * rather than usb_buffer_map(), since on some hardware (with IOMMUs) it
- * may be able to coalesce mappings for improved I/O efficiency.
- *
- * Reverse the effect of this call with usb_buffer_unmap_sg().
- */
-int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
-		      struct scatterlist *sg, int nents)
-{
-	struct usb_bus		*bus;
-	struct device		*controller;
-
-	if (!dev
-			|| !(bus = dev->bus)
-			|| !(controller = bus->sysdev)
-			|| !controller->dma_mask)
-		return -EINVAL;
-
-	/* FIXME generic api broken like pci, can't report errors */
-	return dma_map_sg(controller, sg, nents,
-			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE) ? : -ENOMEM;
-}
-EXPORT_SYMBOL_GPL(usb_buffer_map_sg);
-#endif
-
-/* XXX DISABLED, no users currently.  If you wish to re-enable this
- * XXX please determine whether the sync is to transfer ownership of
- * XXX the buffer from device to cpu or vice verse, and thusly use the
- * XXX appropriate _for_{cpu,device}() method.  -DaveM
- */
-#if 0
-
-/**
- * usb_buffer_dmasync_sg - synchronize DMA and CPU view of scatterlist buffer(s)
- * @dev: device to which the scatterlist will be mapped
- * @is_in: mapping transfer direction
- * @sg: the scatterlist to synchronize
- * @n_hw_ents: the positive return value from usb_buffer_map_sg
- *
- * Use this when you are re-using a scatterlist's data buffers for
- * another USB request.
- */
-void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
-			   struct scatterlist *sg, int n_hw_ents)
-{
-	struct usb_bus		*bus;
-	struct device		*controller;
-
-	if (!dev
-			|| !(bus = dev->bus)
-			|| !(controller = bus->sysdev)
-			|| !controller->dma_mask)
-		return;
-
-	dma_sync_sg_for_cpu(controller, sg, n_hw_ents,
-			    is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-}
-EXPORT_SYMBOL_GPL(usb_buffer_dmasync_sg);
-#endif
-
-#if 0
-/**
- * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist
- * @dev: device to which the scatterlist will be mapped
- * @is_in: mapping transfer direction
- * @sg: the scatterlist to unmap
- * @n_hw_ents: the positive return value from usb_buffer_map_sg
- *
- * Reverses the effect of usb_buffer_map_sg().
- */
-void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
-			 struct scatterlist *sg, int n_hw_ents)
-{
-	struct usb_bus		*bus;
-	struct device		*controller;
-
-	if (!dev
-			|| !(bus = dev->bus)
-			|| !(controller = bus->sysdev)
-			|| !controller->dma_mask)
-		return;
-
-	dma_unmap_sg(controller, sg, n_hw_ents,
-			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-}
-EXPORT_SYMBOL_GPL(usb_buffer_unmap_sg);
-#endif
-
 /*
  * Notifications of device and interface registration
  */