MIPS: Add 8250/16550 serial early printk driver

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/947/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig.debug

@@ -20,6 +20,14 @@ config EARLY_PRINTK
 	  doesn't cooperate with an X server. You should normally say N here,
 	  unless you want to debug such a crash.
 
+config EARLY_PRINTK_8250
+	bool "8250/16550 and compatible serial early printk driver"
+	depends on EARLY_PRINTK
+	default n
+	help
+	  If you say Y here, it will be possible to use a 8250/16550 serial
+	  port as the boot console.
+
 config CMDLINE_BOOL
 	bool "Built-in kernel command line"
 	default n

arch/mips/include/asm/setup.h

@@ -5,6 +5,14 @@
 
 extern void setup_early_printk(void);
 
+#ifdef CONFIG_EARLY_PRINTK_8250
+extern void setup_8250_early_printk_port(unsigned long base,
+	unsigned int reg_shift, unsigned int timeout);
+#else
+static inline void setup_8250_early_printk_port(unsigned long base,
+	unsigned int reg_shift, unsigned int timeout) {}
+#endif
+
 extern void set_handler(unsigned long offset, void *addr, unsigned long len);
 extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
 

arch/mips/kernel/Makefile

@@ -84,6 +84,7 @@ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_EARLY_PRINTK_8250)	+= early_printk_8250.o
 obj-$(CONFIG_SPINLOCK_TEST)	+= spinlock_test.o
 obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
 

arch/mips/kernel/early_printk_8250.c

+/*
+ *  8250/16550-type serial ports prom_putchar()
+ *
+ *  Copyright (C) 2010  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+static void __iomem *serial8250_base;
+static unsigned int serial8250_reg_shift;
+static unsigned int serial8250_tx_timeout;
+
+void setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift,
+				  unsigned int timeout)
+{
+	serial8250_base = (void __iomem *)base;
+	serial8250_reg_shift = reg_shift;
+	serial8250_tx_timeout = timeout;
+}
+
+static inline u8 serial_in(int offset)
+{
+	return readb(serial8250_base + (offset << serial8250_reg_shift));
+}
+
+static inline void serial_out(int offset, char value)
+{
+	writeb(value, serial8250_base + (offset << serial8250_reg_shift));
+}
+
+void prom_putchar(char c)
+{
+	unsigned int timeout;
+	int status, bits;
+
+	if (!serial8250_base)
+		return;
+
+	timeout = serial8250_tx_timeout;
+	bits = UART_LSR_TEMT | UART_LSR_THRE;
+
+	do {
+		status = serial_in(UART_LSR);
+
+		if (--timeout == 0)
+			break;
+	} while ((status & bits) != bits);
+
+	if (timeout)
+		serial_out(UART_TX, c);
+}