Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: panel: fix lcd panel driver build failure
  Staging: android: fix up units in timed_gpio
  Staging: android: ram_console: Disable ECC when early init is enabled and validate buffer size
  Staging: at76_usb: Add support for OQO Model 01+
  Staging: at76_usb: fix bugs introduced by "Staging: at76_usb: cleanup dma on stack issues"
  Revert Staging: at76_usb: update drivers/staging/at76_usb w/ mac80211 port

drivers/staging/android/Kconfig

@@ -27,6 +27,7 @@ menuconfig ANDROID_RAM_CONSOLE_ERROR_CORRECTION
 	bool "Android RAM Console Enable error correction"
 	default n
 	depends on ANDROID_RAM_CONSOLE
+	depends on !ANDROID_RAM_CONSOLE_EARLY_INIT
 	select REED_SOLOMON
 	select REED_SOLOMON_ENC8
 	select REED_SOLOMON_DEC8

drivers/staging/android/ram_console.c

@@ -224,9 +224,23 @@ static int __init ram_console_init(struct ram_console_buffer *buffer,
 	ram_console_buffer_size =
 		buffer_size - sizeof(struct ram_console_buffer);
 
+	if (ram_console_buffer_size > buffer_size) {
+		pr_err("ram_console: buffer %p, invalid size %d, datasize %d\n",
+		       buffer, buffer_size, ram_console_buffer_size);
+		return 0;
+	}
+
 #ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION
 	ram_console_buffer_size -= (DIV_ROUND_UP(ram_console_buffer_size,
 						ECC_BLOCK_SIZE) + 1) * ECC_SIZE;
+
+	if (ram_console_buffer_size > buffer_size) {
+		pr_err("ram_console: buffer %p, invalid size %d, "
+		       "non-ecc datasize %d\n",
+		       buffer, buffer_size, ram_console_buffer_size);
+		return 0;
+	}
+
 	ram_console_par_buffer = buffer->data + ram_console_buffer_size;
 
 

drivers/staging/android/timed_gpio.c

@@ -50,7 +50,7 @@ static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *att
 	if (hrtimer_active(&gpio_data->timer)) {
 		ktime_t r = hrtimer_get_remaining(&gpio_data->timer);
 		struct timeval t = ktime_to_timeval(r);
-		remaining = t.tv_sec * 1000 + t.tv_usec;
+		remaining = t.tv_sec * 1000 + t.tv_usec / 1000;
 	} else
 		remaining = 0;
 

drivers/staging/at76_usb/Kconfig

 config USB_ATMEL
 	tristate "Atmel at76c503/at76c505/at76c505a USB cards"
-	depends on MAC80211 && WLAN_80211 && USB
+	depends on WLAN_80211 && USB
 	default N
 	select FW_LOADER
 	---help---

drivers/staging/panel/panel.c

@@ -622,7 +622,7 @@ static int set_ctrl_bits(void)
 }
 
 /* sets ctrl & data port bits according to current signals values */
-static void set_bits(void)
+static void panel_set_bits(void)
 {
 	set_data_bits();
 	set_ctrl_bits();
@@ -707,12 +707,12 @@ static void lcd_send_serial(int byte)
 	 */
 	for (bit = 0; bit < 8; bit++) {
 		bits.cl = BIT_CLR;	/* CLK low */
-		set_bits();
+		panel_set_bits();
 		bits.da = byte & 1;
-		set_bits();
+		panel_set_bits();
 		udelay(2);	/* maintain the data during 2 us before CLK up */
 		bits.cl = BIT_SET;	/* CLK high */
-		set_bits();
+		panel_set_bits();
 		udelay(1);	/* maintain the strobe during 1 us */
 		byte >>= 1;
 	}
@@ -727,7 +727,7 @@ static void lcd_backlight(int on)
 	/* The backlight is activated by seting the AUTOFEED line to +5V  */
 	spin_lock(&pprt_lock);
 	bits.bl = on;
-	set_bits();
+	panel_set_bits();
 	spin_unlock(&pprt_lock);
 }