ath10k: use bss_info as txpower source

This simply changes the source for txpower setup.
It does not make ath10k use different txpower
values for different vifs.

This will make it easier to implement chanctx in
ath10k in the future.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/core.h

@@ -287,6 +287,7 @@ struct ath10k_vif {
 	u8 force_sgi;
 	bool use_cts_prot;
 	int num_legacy_stations;
+	int txpower;
 };
 
 struct ath10k_vif_iter {

drivers/net/wireless/ath/ath10k/mac.c

@@ -2676,12 +2676,68 @@ static void ath10k_config_chan(struct ath10k *ar)
 	ath10k_monitor_recalc(ar);
 }
 
+static int ath10k_mac_txpower_setup(struct ath10k *ar, int txpower)
+{
+	int ret;
+	u32 param;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac txpower %d\n", txpower);
+
+	param = ar->wmi.pdev_param->txpower_limit2g;
+	ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2);
+	if (ret) {
+		ath10k_warn(ar, "failed to set 2g txpower %d: %d\n",
+			    txpower, ret);
+		return ret;
+	}
+
+	param = ar->wmi.pdev_param->txpower_limit5g;
+	ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2);
+	if (ret) {
+		ath10k_warn(ar, "failed to set 5g txpower %d: %d\n",
+			    txpower, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_mac_txpower_recalc(struct ath10k *ar)
+{
+	struct ath10k_vif *arvif;
+	int ret, txpower = -1;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	list_for_each_entry(arvif, &ar->arvifs, list) {
+		WARN_ON(arvif->txpower < 0);
+
+		if (txpower == -1)
+			txpower = arvif->txpower;
+		else
+			txpower = min(txpower, arvif->txpower);
+	}
+
+	if (WARN_ON(txpower == -1))
+		return -EINVAL;
+
+	ret = ath10k_mac_txpower_setup(ar, txpower);
+	if (ret) {
+		ath10k_warn(ar, "failed to setup tx power %d: %d\n",
+			    txpower, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct ath10k *ar = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
 	int ret = 0;
-	u32 param;
 
 	mutex_lock(&ar->conf_mutex);
 
@@ -2705,25 +2761,6 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
 		}
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac config power %d\n",
-			   hw->conf.power_level);
-
-		param = ar->wmi.pdev_param->txpower_limit2g;
-		ret = ath10k_wmi_pdev_set_param(ar, param,
-						hw->conf.power_level * 2);
-		if (ret)
-			ath10k_warn(ar, "failed to set 2g txpower %d: %d\n",
-				    hw->conf.power_level, ret);
-
-		param = ar->wmi.pdev_param->txpower_limit5g;
-		ret = ath10k_wmi_pdev_set_param(ar, param,
-						hw->conf.power_level * 2);
-		if (ret)
-			ath10k_warn(ar, "failed to set 5g txpower %d: %d\n",
-				    hw->conf.power_level, ret);
-	}
-
 	if (changed & IEEE80211_CONF_CHANGE_PS)
 		ath10k_config_ps(ar);
 
@@ -2932,6 +2969,13 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		goto err_peer_delete;
 	}
 
+	arvif->txpower = vif->bss_conf.txpower;
+	ret = ath10k_mac_txpower_recalc(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
+		goto err_peer_delete;
+	}
+
 	mutex_unlock(&ar->conf_mutex);
 	return 0;
 
@@ -3168,6 +3212,16 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		}
 	}
 
+	if (changed & BSS_CHANGED_TXPOWER) {
+		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev_id %i txpower %d\n",
+			   arvif->vdev_id, info->txpower);
+
+		arvif->txpower = info->txpower;
+		ret = ath10k_mac_txpower_recalc(ar);
+		if (ret)
+			ath10k_warn(ar, "failed to recalc tx power: %d\n", ret);
+	}
+
 	mutex_unlock(&ar->conf_mutex);
 }