Skip to content

L
linux
Commit 7dad171c authored by Prarit Bhargava's avatar Prarit Bhargava Committed by David S. Miller
Browse files
Options

vxge: Fix checkstack warning in vxge_probe() 

Linux 2.6.33 reports this checkstack warning:

drivers/net/vxge/vxge-main.c: In function 'vxge_probe':
drivers/net/vxge/vxge-main.c:4409: warning: the frame size of 1028 bytes is larger than 1024 bytes

This warning does not occur in the latest linux-2.6 or linux-next, however,
when I do a 'make -j32 CONFIG_FRAME_WARN=512' instead of 1024 I see

drivers/net/vxge/vxge-main.c: In function ‘vxge_probe’:
drivers/net/vxge/vxge-main.c:4423: warning: the frame size of 1024 bytes is larger than 512 bytes

This patch moves the large vxge_config struct off the stack.
Signed-off-by: default avatarPrarit Bhargava <prarit@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c2d9ba9b
Hide whitespace changes
Inline Side-by-side
Showing with 51 additions and 42 deletions
drivers/net/vxge/vxge-main.c
View file @ 7dad171c
......@@ -4012,7 +4012,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
int high_dma = 0;
u64 vpath_mask = 0;
struct vxgedev *vdev;
struct vxge_config ll_config;
struct vxge_config *ll_config = NULL;
struct vxge_hw_device_config *device_config = NULL;
struct vxge_hw_device_attr attr;
int i, j, no_of_vpath = 0, max_vpath_supported = 0;
......@@ -4071,17 +4071,24 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
goto _exit0;
}
memset(&ll_config, 0, sizeof(struct vxge_config));
ll_config.tx_steering_type = TX_MULTIQ_STEERING;
ll_config.intr_type = MSI_X;
ll_config.napi_weight = NEW_NAPI_WEIGHT;
ll_config.rth_steering = RTH_STEERING;
ll_config = kzalloc(sizeof(*ll_config), GFP_KERNEL);
if (!ll_config) {
ret = -ENOMEM;
vxge_debug_init(VXGE_ERR,
"ll_config : malloc failed %s %d",
__FILE__, __LINE__);
goto _exit0;
}
ll_config->tx_steering_type = TX_MULTIQ_STEERING;
ll_config->intr_type = MSI_X;
ll_config->napi_weight = NEW_NAPI_WEIGHT;
ll_config->rth_steering = RTH_STEERING;
/* get the default configuration parameters */
vxge_hw_device_config_default_get(device_config);
/* initialize configuration parameters */
vxge_device_config_init(device_config, &ll_config.intr_type);
vxge_device_config_init(device_config, &ll_config->intr_type);
ret = pci_enable_device(pdev);
if (ret) {
......@@ -4134,7 +4141,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
(unsigned long long)pci_resource_start(pdev, 0));
status = vxge_hw_device_hw_info_get(attr.bar0,
&ll_config.device_hw_info);
&ll_config->device_hw_info);
if (status != VXGE_HW_OK) {
vxge_debug_init(VXGE_ERR,
"%s: Reading of hardware info failed."
......@@ -4143,7 +4150,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
goto _exit3;
}
if (ll_config.device_hw_info.fw_version.major !=
if (ll_config->device_hw_info.fw_version.major !=
VXGE_DRIVER_FW_VERSION_MAJOR) {
vxge_debug_init(VXGE_ERR,
"%s: Incorrect firmware version."
......@@ -4153,7 +4160,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
goto _exit3;
}
vpath_mask = ll_config.device_hw_info.vpath_mask;
vpath_mask = ll_config->device_hw_info.vpath_mask;
if (vpath_mask == 0) {
vxge_debug_ll_config(VXGE_TRACE,
"%s: No vpaths available in device", VXGE_DRIVER_NAME);
......@@ -4165,10 +4172,10 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
"%s:%d Vpath mask = %llx", __func__, __LINE__,
(unsigned long long)vpath_mask);
function_mode = ll_config.device_hw_info.function_mode;
host_type = ll_config.device_hw_info.host_type;
function_mode = ll_config->device_hw_info.function_mode;
host_type = ll_config->device_hw_info.host_type;
is_privileged = __vxge_hw_device_is_privilaged(host_type,
ll_config.device_hw_info.func_id);
ll_config->device_hw_info.func_id);
/* Check how many vpaths are available */
for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
......@@ -4182,7 +4189,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
/* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */
if (is_sriov(function_mode) && (max_config_dev > 1) &&
(ll_config.intr_type != INTA) &&
(ll_config->intr_type != INTA) &&
(is_privileged == VXGE_HW_OK)) {
ret = pci_enable_sriov(pdev, ((max_config_dev - 1) < num_vfs)
? (max_config_dev - 1) : num_vfs);
......@@ -4195,7 +4202,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
* Configure vpaths and get driver configured number of vpaths
* which is less than or equal to the maximum vpaths per function.
*/
no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, &ll_config);
no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, ll_config);
if (!no_of_vpath) {
vxge_debug_ll_config(VXGE_ERR,
"%s: No more vpaths to configure", VXGE_DRIVER_NAME);
......@@ -4230,21 +4237,21 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
/* set private device info */
pci_set_drvdata(pdev, hldev);
ll_config.gro_enable = VXGE_GRO_ALWAYS_AGGREGATE;
ll_config.fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS;
ll_config.addr_learn_en = addr_learn_en;
ll_config.rth_algorithm = RTH_ALG_JENKINS;
ll_config.rth_hash_type_tcpipv4 = VXGE_HW_RING_HASH_TYPE_TCP_IPV4;
ll_config.rth_hash_type_ipv4 = VXGE_HW_RING_HASH_TYPE_NONE;
ll_config.rth_hash_type_tcpipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
ll_config.rth_hash_type_ipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
ll_config.rth_hash_type_tcpipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
ll_config.rth_hash_type_ipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
ll_config.rth_bkt_sz = RTH_BUCKET_SIZE;
ll_config.tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
ll_config.rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
if (vxge_device_register(hldev, &ll_config, high_dma, no_of_vpath,
ll_config->gro_enable = VXGE_GRO_ALWAYS_AGGREGATE;
ll_config->fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS;
ll_config->addr_learn_en = addr_learn_en;
ll_config->rth_algorithm = RTH_ALG_JENKINS;
ll_config->rth_hash_type_tcpipv4 = VXGE_HW_RING_HASH_TYPE_TCP_IPV4;
ll_config->rth_hash_type_ipv4 = VXGE_HW_RING_HASH_TYPE_NONE;
ll_config->rth_hash_type_tcpipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
ll_config->rth_hash_type_ipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
ll_config->rth_hash_type_tcpipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
ll_config->rth_hash_type_ipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
ll_config->rth_bkt_sz = RTH_BUCKET_SIZE;
ll_config->tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
ll_config->rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
if (vxge_device_register(hldev, ll_config, high_dma, no_of_vpath,
&vdev)) {
ret = -EINVAL;
goto _exit4;
......@@ -4275,7 +4282,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
vdev->vpaths[j].vdev = vdev;
vdev->vpaths[j].max_mac_addr_cnt = max_mac_vpath;
memcpy((u8 *)vdev->vpaths[j].macaddr,
(u8 *)ll_config.device_hw_info.mac_addrs[i],
ll_config->device_hw_info.mac_addrs[i],
ETH_ALEN);
/* Initialize the mac address list header */
......@@ -4296,18 +4303,18 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
macaddr = (u8 *)vdev->vpaths[0].macaddr;
ll_config.device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0';
ll_config.device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0';
ll_config.device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0';
ll_config->device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0';
ll_config->device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0';
ll_config->device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0';
vxge_debug_init(VXGE_TRACE, "%s: SERIAL NUMBER: %s",
vdev->ndev->name, ll_config.device_hw_info.serial_number);
vdev->ndev->name, ll_config->device_hw_info.serial_number);
vxge_debug_init(VXGE_TRACE, "%s: PART NUMBER: %s",
vdev->ndev->name, ll_config.device_hw_info.part_number);
vdev->ndev->name, ll_config->device_hw_info.part_number);
vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter",
vdev->ndev->name, ll_config.device_hw_info.product_desc);
vdev->ndev->name, ll_config->device_hw_info.product_desc);
vxge_debug_init(VXGE_TRACE, "%s: MAC ADDR: %pM",
vdev->ndev->name, macaddr);
......@@ -4317,11 +4324,11 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
vxge_debug_init(VXGE_TRACE,
"%s: Firmware version : %s Date : %s", vdev->ndev->name,
ll_config.device_hw_info.fw_version.version,
ll_config.device_hw_info.fw_date.date);
ll_config->device_hw_info.fw_version.version,
ll_config->device_hw_info.fw_date.date);
if (new_device) {
switch (ll_config.device_hw_info.function_mode) {
switch (ll_config->device_hw_info.function_mode) {
case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION:
vxge_debug_init(VXGE_TRACE,
"%s: Single Function Mode Enabled", vdev->ndev->name);
......@@ -4344,7 +4351,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
vxge_print_parm(vdev, vpath_mask);
/* Store the fw version for ethttool option */
strcpy(vdev->fw_version, ll_config.device_hw_info.fw_version.version);
strcpy(vdev->fw_version, ll_config->device_hw_info.fw_version.version);
memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN);
memcpy(vdev->ndev->perm_addr, vdev->ndev->dev_addr, ETH_ALEN);
......@@ -4383,7 +4390,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
* present to prevent such a failure.
*/
if (ll_config.device_hw_info.function_mode ==
if (ll_config->device_hw_info.function_mode ==
VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION)
if (vdev->config.intr_type == INTA)
vxge_hw_device_unmask_all(hldev);
......@@ -4395,6 +4402,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev),
vxge_hw_device_trace_level_get(hldev));
kfree(ll_config);
return 0;
_exit5:
......@@ -4412,6 +4420,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
_exit1:
pci_disable_device(pdev);
_exit0:
kfree(ll_config);
kfree(device_config);
driver_config->config_dev_cnt--;
pci_set_drvdata(pdev, NULL);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7