Merge branch 'next/cleanup-s3c24xx' of...

Merge branch 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

From Kukjin Kim:
Basically, this patch merges mach-s3c2410, mach-s3c2412 and mach-s3c2440
into mach-s3c24xx.

* 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C24XX: Move mach-s3c2440/ pll into mach-s3c24xx/
  ARM: S3C24XX: Move mach-s3c2440/ cpufreq driver into mach-s3c24xx/
  ARM: S3C24XX: Move mach-s3c2412/ cpufreq driver into mach-s3c24xx/
  ARM: S3C2412: Remove useless codes mach-s3c2412/gpio.c
  ARM: S3C24XX: Move mach-s3c2410/ pll into mach-s3c24xx/
  ARM: S3C24XX: Move mach-s3c2410/ cpufreq into mach-s3c24xx/

arch/arm/Kconfig

@@ -1086,10 +1086,6 @@ source "arch/arm/mach-socfpga/Kconfig"
 source "arch/arm/plat-spear/Kconfig"
 
 source "arch/arm/mach-s3c24xx/Kconfig"
-if ARCH_S3C24XX
-source "arch/arm/mach-s3c2412/Kconfig"
-source "arch/arm/mach-s3c2440/Kconfig"
-endif
 
 if ARCH_S3C64XX
 source "arch/arm/mach-s3c64xx/Kconfig"

arch/arm/Makefile

@@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_PRIMA2)		+= prima2
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_RPC)		+= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx s3c2412 s3c2440
+machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx
 machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		+= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100

arch/arm/mach-s3c2410/Kconfig

-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# cpu frequency scaling support
-
-config S3C2410_CPUFREQ
-	bool
-	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
-	select S3C2410_CPUFREQ_UTILS
-	help
-	  CPU Frequency scaling support for S3C2410
-
-config S3C2410_PLLTABLE
-	bool
-	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
-	default y
-	help
-	  Select the PLL table for the S3C2410
-

arch/arm/mach-s3c2410/Makefile

-# arch/arm/mach-s3c2410/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
-obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
-

arch/arm/mach-s3c2412/Kconfig

-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Note, the S3C2412 IOtiming support is in plat-s3c24xx
-
-config S3C2412_CPUFREQ
-	bool
-	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
-	default y
-	select S3C2412_IOTIMING
-	help
-	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.

arch/arm/mach-s3c2412/Makefile

-# arch/arm/mach-s3c2412/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o

arch/arm/mach-s3c2412/gpio.c

-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long offs = pin - chip->chip.base;
-	unsigned long flags;
-	unsigned long slpcon;
-
-	offs *= 2;
-
-	if (pin < S3C2410_GPB(0))
-		return -EINVAL;
-
-	if (pin >= S3C2410_GPF(0) &&
-	    pin <= S3C2410_GPG(16))
-		return -EINVAL;
-
-	if (pin > S3C2410_GPH(16))
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	slpcon = __raw_readl(chip->base + 0x0C);
-
-	slpcon &= ~(3 << offs);
-	slpcon |= state << offs;
-
-	__raw_writel(slpcon, chip->base + 0x0C);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);

arch/arm/mach-s3c2440/Kconfig

-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config S3C2440_CPUFREQ
-	bool "S3C2440/S3C2442 CPU Frequency scaling support"
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-	default y
-	select S3C2410_CPUFREQ_UTILS
-	help
-	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
-config S3C2440_XTAL_12000000
-	bool
-	help
-	  Indicate that the build needs to support 12MHz system
-	  crystal.
-
-config S3C2440_XTAL_16934400
-	bool
-	help
-	  Indicate that the build needs to support 16.9344MHz system
-	  crystal.
-
-config S3C2440_PLL_12000000
-	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
-	default y if CPU_FREQ_S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
-	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
-	default y if CPU_FREQ_S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.

arch/arm/mach-s3c2440/Makefile

-# arch/arm/mach-s3c2440/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
-
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o

arch/arm/mach-s3c24xx/Kconfig

@@ -127,6 +127,20 @@ config S3C2410_PM
 
 if CPU_S3C2410
 
+config S3C2410_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLL
+	bool
+	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	default y
+	help
+	  Select the PLL table for the S3C2410
+
 config S3C24XX_SIMTEC_NOR
 	bool
 	help
@@ -266,6 +280,14 @@ config CPU_S3C2412_ONLY
 		   !CPU_S3C2443 && CPU_S3C2412
 	default y
 
+config S3C2412_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	default y
+	select S3C2412_IOTIMING
+	help
+	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
 config S3C2412_DMA
 	bool
 	help
@@ -365,11 +387,45 @@ endif	# CPU_S3C2416
 
 if CPU_S3C2440
 
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	default y
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
 config S3C2440_DMA
 	bool
 	help
 	  Support for S3C2440 specific DMA code5A
 
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 comment "S3C2440 Boards"
 
 #

arch/arm/mach-s3c24xx/Makefile

@@ -17,10 +17,13 @@ obj-				:=
 obj-y				+= common.o
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
+obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpufreq-s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
+obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpufreq-s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
@@ -31,7 +34,10 @@ obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o irq-s3c2440.o clock-s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= cpufreq-s3c2440.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
 
 obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o irq-s3c2443.o clock-s3c2443.o
 

arch/arm/mach-s3c2410/cpu-freq.c → arch/arm/mach-s3c24xx/cpufreq-s3c2410.c

-/* linux/arch/arm/mach-s3c2410/cpu-freq.c
- *
+/*
  * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -81,7 +80,7 @@ static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
 	cfg->divs.p_divisor = pdiv;
 	cfg->divs.h_divisor = hdiv;
 
-	return 0      ;
+	return 0;
 }
 
 static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
@@ -131,7 +130,6 @@ static int __init s3c2410_cpufreq_init(void)
 {
 	return subsys_interface_register(&s3c2410_cpufreq_interface);
 }
-
 arch_initcall(s3c2410_cpufreq_init);
 
 static int s3c2410a_cpufreq_add(struct device *dev,
@@ -159,5 +157,4 @@ static int __init s3c2410a_cpufreq_init(void)
 {
 	return subsys_interface_register(&s3c2410a_cpufreq_interface);
 }
-
 arch_initcall(s3c2410a_cpufreq_init);

arch/arm/mach-s3c2412/cpu-freq.c → arch/arm/mach-s3c24xx/cpufreq-s3c2412.c

-/* linux/arch/arm/mach-s3c2412/cpu-freq.c
- *
+/*
  * Copyright 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -111,7 +110,7 @@ static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
 
 	return 0;
 
- invalid:
+invalid:
 	return -EINVAL;
 }
 
@@ -255,5 +254,4 @@ static int s3c2412_cpufreq_init(void)
 {
 	return subsys_interface_register(&s3c2412_cpufreq_interface);
 }
-
 arch_initcall(s3c2412_cpufreq_init);

arch/arm/mach-s3c2440/s3c2440-cpufreq.c → arch/arm/mach-s3c24xx/cpufreq-s3c2440.c

-/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
- *
+/*
  * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -310,5 +309,4 @@ static int s3c2442_cpufreq_init(void)
 {
 	return subsys_interface_register(&s3c2442_cpufreq_interface);
 }
-
 subsys_initcall(s3c2442_cpufreq_init);

arch/arm/mach-s3c24xx/include/mach/hardware.h

@@ -23,12 +23,6 @@ extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
 
 #endif /* CONFIG_CPU_S3C2440 */
 
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
 #endif /* __ASSEMBLY__ */
 
 #include <asm/sizes.h>

arch/arm/mach-s3c2410/pll.c → arch/arm/mach-s3c24xx/pll-s3c2410.c

-/* arch/arm/mach-s3c2410/pll.c
- *
+/*
  * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -82,7 +81,6 @@ static int __init s3c2410_pll_init(void)
 	return subsys_interface_register(&s3c2410_plls_interface);
 
 }
-
 arch_initcall(s3c2410_pll_init);
 
 static struct subsys_interface s3c2410a_plls_interface = {
@@ -95,5 +93,4 @@ static int __init s3c2410a_pll_init(void)
 {
 	return subsys_interface_register(&s3c2410a_plls_interface);
 }
-
 arch_initcall(s3c2410a_pll_init);

arch/arm/mach-s3c2440/s3c2440-pll-12000000.c → arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c

-/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
- *
+/*
  * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -83,7 +82,6 @@ static int __init s3c2440_pll_12mhz(void)
 	return subsys_interface_register(&s3c2440_plls12_interface);
 
 }
-
 arch_initcall(s3c2440_pll_12mhz);
 
 static struct subsys_interface s3c2442_plls12_interface = {
@@ -97,5 +95,4 @@ static int __init s3c2442_pll_12mhz(void)
 	return subsys_interface_register(&s3c2442_plls12_interface);
 
 }
-
 arch_initcall(s3c2442_pll_12mhz);

arch/arm/mach-s3c2440/s3c2440-pll-16934400.c → arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c

-/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
- *
+/*
  * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -111,7 +110,6 @@ static int __init s3c2440_pll_16934400(void)
 {
 	return subsys_interface_register(&s3c2440_plls169344_interface);
 }
-
 arch_initcall(s3c2440_pll_16934400);
 
 static struct subsys_interface s3c2442_plls169344_interface = {
@@ -124,5 +122,4 @@ static int __init s3c2442_pll_16934400(void)
 {
 	return subsys_interface_register(&s3c2442_plls169344_interface);
 }
-
 arch_initcall(s3c2442_pll_16934400);