Commit 7e9400f1 authored by John W. Linville's avatar John W. Linville Committed by Jeff Garzik

[PATCH] eeprom_93cx6: shorten pulse timing to match spec

93cx6 datasheet available here:

        http://ww1.microchip.com/downloads/en/DeviceDoc/21749F.pdf

Figure 1-1 and Table 1-2 on pages 4-5 indicate that both Clock High
Time and Clock Low Time have largest minimum times of 450ns.
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 605bebe2
...@@ -42,10 +42,10 @@ static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom) ...@@ -42,10 +42,10 @@ static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
/* /*
* Add a short delay for the pulse to work. * Add a short delay for the pulse to work.
* According to the specifications the minimal time * According to the specifications the "maximum minimum"
* should be 450ns so a 1us delay is sufficient. * time should be 450ns.
*/ */
udelay(1); ndelay(450);
} }
static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom) static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment