Commit 7e98aa46 authored by Gabor Juhos's avatar Gabor Juhos Committed by Ralf Baechle

MIPS: ath79: add common USB Host Controller device

Add common platform_device and helper code to make the registration of
the built-in USB controllers easier on the board which are using them.
Also register the USB controller on the AP81 and PB44 boards.
Signed-off-by: default avatarGabor Juhos <juhosg@openwrt.org>
Signed-off-by: default avatarImre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2442/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent d2b4ac1e
......@@ -9,6 +9,7 @@ config ATH79_MACH_AP81
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
select ATH79_DEV_USB
help
Say 'Y' here if you want your kernel to support the
Atheros AP81 reference board.
......@@ -19,6 +20,7 @@ config ATH79_MACH_PB44
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
select ATH79_DEV_USB
help
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
......@@ -52,4 +54,7 @@ config ATH79_DEV_LEDS_GPIO
config ATH79_DEV_SPI
def_bool n
config ATH79_DEV_USB
def_bool n
endif
......@@ -20,6 +20,7 @@ obj-$(CONFIG_ATH79_DEV_AR913X_WMAC) += dev-ar913x-wmac.o
obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
#
# Machines
......
/*
* Atheros AR7XXX/AR9XXX USB Host Controller device
*
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-usb.h"
static struct resource ath79_ohci_resources[] = {
[0] = {
/* .start and .end fields are filled dynamically */
.flags = IORESOURCE_MEM,
},
[1] = {
.start = ATH79_MISC_IRQ_OHCI,
.end = ATH79_MISC_IRQ_OHCI,
.flags = IORESOURCE_IRQ,
},
};
static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32);
static struct platform_device ath79_ohci_device = {
.name = "ath79-ohci",
.id = -1,
.resource = ath79_ohci_resources,
.num_resources = ARRAY_SIZE(ath79_ohci_resources),
.dev = {
.dma_mask = &ath79_ohci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct resource ath79_ehci_resources[] = {
[0] = {
/* .start and .end fields are filled dynamically */
.flags = IORESOURCE_MEM,
},
[1] = {
.start = ATH79_CPU_IRQ_USB,
.end = ATH79_CPU_IRQ_USB,
.flags = IORESOURCE_IRQ,
},
};
static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32);
static struct platform_device ath79_ehci_device = {
.name = "ath79-ehci",
.id = -1,
.resource = ath79_ehci_resources,
.num_resources = ARRAY_SIZE(ath79_ehci_resources),
.dev = {
.dma_mask = &ath79_ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \
AR71XX_RESET_USB_PHY | \
AR71XX_RESET_USB_OHCI_DLL)
static void __init ath79_usb_setup(void)
{
void __iomem *usb_ctrl_base;
ath79_device_reset_set(AR71XX_USB_RESET_MASK);
mdelay(1000);
ath79_device_reset_clear(AR71XX_USB_RESET_MASK);
usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
/* Turning on the Buff and Desc swap bits */
__raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG);
/* WAR for HW bug. Here it adjusts the duration between two SOFS */
__raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
iounmap(usb_ctrl_base);
mdelay(900);
ath79_ohci_resources[0].start = AR71XX_OHCI_BASE;
ath79_ohci_resources[0].end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1;
platform_device_register(&ath79_ohci_device);
ath79_ehci_resources[0].start = AR71XX_EHCI_BASE;
ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1;
ath79_ehci_device.name = "ar71xx-ehci";
platform_device_register(&ath79_ehci_device);
}
static void __init ar7240_usb_setup(void)
{
void __iomem *usb_ctrl_base;
ath79_device_reset_clear(AR7240_RESET_OHCI_DLL);
ath79_device_reset_set(AR7240_RESET_USB_HOST);
mdelay(1000);
ath79_device_reset_set(AR7240_RESET_OHCI_DLL);
ath79_device_reset_clear(AR7240_RESET_USB_HOST);
usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE);
/* WAR for HW bug. Here it adjusts the duration between two SOFS */
__raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
iounmap(usb_ctrl_base);
ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
platform_device_register(&ath79_ohci_device);
}
static void __init ar724x_usb_setup(void)
{
ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE);
mdelay(10);
ath79_device_reset_clear(AR724X_RESET_USB_HOST);
mdelay(10);
ath79_device_reset_clear(AR724X_RESET_USB_PHY);
mdelay(10);
ath79_ehci_resources[0].start = AR724X_EHCI_BASE;
ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1;
ath79_ehci_device.name = "ar724x-ehci";
platform_device_register(&ath79_ehci_device);
}
static void __init ar913x_usb_setup(void)
{
ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE);
mdelay(10);
ath79_device_reset_clear(AR913X_RESET_USB_HOST);
mdelay(10);
ath79_device_reset_clear(AR913X_RESET_USB_PHY);
mdelay(10);
ath79_ehci_resources[0].start = AR913X_EHCI_BASE;
ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1;
ath79_ehci_device.name = "ar913x-ehci";
platform_device_register(&ath79_ehci_device);
}
void __init ath79_register_usb(void)
{
if (soc_is_ar71xx())
ath79_usb_setup();
else if (soc_is_ar7240())
ar7240_usb_setup();
else if (soc_is_ar7241() || soc_is_ar7242())
ar724x_usb_setup();
else if (soc_is_ar913x())
ar913x_usb_setup();
else
BUG();
}
/*
* Atheros AR71XX/AR724X/AR913X USB Host Controller support
*
* Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef _ATH79_DEV_USB_H
#define _ATH79_DEV_USB_H
void ath79_register_usb(void);
#endif /* _ATH79_DEV_USB_H */
......@@ -14,6 +14,7 @@
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#define AP81_GPIO_LED_STATUS 1
#define AP81_GPIO_LED_AOSS 3
......@@ -92,6 +93,7 @@ static void __init ap81_setup(void)
ath79_register_spi(&ap81_spi_data, ap81_spi_info,
ARRAY_SIZE(ap81_spi_info));
ath79_register_ar913x_wmac(cal_data);
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
......
......@@ -18,6 +18,7 @@
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#define PB44_GPIO_I2C_SCL 0
#define PB44_GPIO_I2C_SDA 1
......@@ -112,6 +113,7 @@ static void __init pb44_init(void)
pb44_gpio_keys);
ath79_register_spi(&pb44_spi_data, pb44_spi_info,
ARRAY_SIZE(pb44_spi_info));
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
......
......@@ -20,6 +20,10 @@
#include <linux/bitops.h>
#define AR71XX_APB_BASE 0x18000000
#define AR71XX_EHCI_BASE 0x1b000000
#define AR71XX_EHCI_SIZE 0x1000
#define AR71XX_OHCI_BASE 0x1c000000
#define AR71XX_OHCI_SIZE 0x1000
#define AR71XX_SPI_BASE 0x1f000000
#define AR71XX_SPI_SIZE 0x01000000
......@@ -27,6 +31,8 @@
#define AR71XX_DDR_CTRL_SIZE 0x100
#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000)
#define AR71XX_UART_SIZE 0x100
#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
#define AR71XX_USB_CTRL_SIZE 0x100
#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000)
#define AR71XX_GPIO_SIZE 0x100
#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000)
......@@ -34,6 +40,16 @@
#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
#define AR71XX_RESET_SIZE 0x100
#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
#define AR7240_USB_CTRL_SIZE 0x100
#define AR7240_OHCI_BASE 0x1b000000
#define AR7240_OHCI_SIZE 0x1000
#define AR724X_EHCI_BASE 0x1b000000
#define AR724X_EHCI_SIZE 0x1000
#define AR913X_EHCI_BASE 0x1b000000
#define AR913X_EHCI_SIZE 0x1000
#define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000)
#define AR913X_WMAC_SIZE 0x30000
......@@ -104,6 +120,12 @@
#define AR913X_AHB_DIV_SHIFT 19
#define AR913X_AHB_DIV_MASK 0x1
/*
* USB_CONFIG block
*/
#define AR71XX_USB_CTRL_REG_FLADJ 0x00
#define AR71XX_USB_CTRL_REG_CONFIG 0x04
/*
* RESET block
*/
......@@ -162,14 +184,22 @@
#define AR71XX_RESET_PCI_BUS BIT(1)
#define AR71XX_RESET_PCI_CORE BIT(0)
#define AR7240_RESET_USB_HOST BIT(5)
#define AR7240_RESET_OHCI_DLL BIT(3)
#define AR724X_RESET_GE1_MDIO BIT(23)
#define AR724X_RESET_GE0_MDIO BIT(22)
#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10)
#define AR724X_RESET_PCIE_PHY BIT(7)
#define AR724X_RESET_PCIE BIT(6)
#define AR724X_RESET_OHCI_DLL BIT(3)
#define AR724X_RESET_USB_HOST BIT(5)
#define AR724X_RESET_USB_PHY BIT(4)
#define AR724X_RESET_USBSUS_OVERRIDE BIT(3)
#define AR913X_RESET_AMBA2WMAC BIT(22)
#define AR913X_RESET_USBSUS_OVERRIDE BIT(10)
#define AR913X_RESET_USB_HOST BIT(5)
#define AR913X_RESET_USB_PHY BIT(4)
#define REV_ID_MAJOR_MASK 0xfff0
#define REV_ID_MAJOR_AR71XX 0x00a0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment