Commit 7ed07855 authored by Brian Masney's avatar Brian Masney Committed by Linus Walleij

pinctrl: qcom: ssbi-gpio: fix gpio-hog related boot issues

When attempting to setup up a gpio hog, device probing will repeatedly
fail with -EPROBE_DEFERED errors. It is caused by a circular dependency
between the gpio and pinctrl frameworks. If the gpio-ranges property is
present in device tree, then the gpio framework will handle the gpio pin
registration and eliminate the circular dependency.

See Christian Lamparter's commit a86caa9b ("pinctrl: msm: fix
gpio-hog related boot issues") for a detailed commit message that
explains the issue in much more detail. The code comment in this commit
came from Christian's commit.

I did not test this change against any hardware supported by this
particular driver, however I was able to validate this same fix works
for pinctrl-spmi-gpio.c using a LG Nexus 5 (hammerhead) phone.
Signed-off-by: default avatarBrian Masney <masneyb@onstation.org>
Reviewed-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent a62c3677
......@@ -762,12 +762,23 @@ static int pm8xxx_gpio_probe(struct platform_device *pdev)
return ret;
}
ret = gpiochip_add_pin_range(&pctrl->chip,
dev_name(pctrl->dev),
0, 0, pctrl->chip.ngpio);
if (ret) {
dev_err(pctrl->dev, "failed to add pin range\n");
goto unregister_gpiochip;
/*
* For DeviceTree-supported systems, the gpio core checks the
* pinctrl's device node for the "gpio-ranges" property.
* If it is present, it takes care of adding the pin ranges
* for the driver. In this case the driver can skip ahead.
*
* In order to remain compatible with older, existing DeviceTree
* files which don't set the "gpio-ranges" property or systems that
* utilize ACPI the driver has to call gpiochip_add_pin_range().
*/
if (!of_property_read_bool(pctrl->dev->of_node, "gpio-ranges")) {
ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev),
0, 0, pctrl->chip.ngpio);
if (ret) {
dev_err(pctrl->dev, "failed to add pin range\n");
goto unregister_gpiochip;
}
}
platform_set_drvdata(pdev, pctrl);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment