staging: rtl8188eu: remove unused defines from wifi.h

All defined P2P* in wifi.h are unused in the driver code,
so remove them.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/include/wifi.h

@@ -667,116 +667,6 @@ enum ht_cap_ampdu_factor {
 #define WPS_ASSOC_STATE_ASSOCIATION_FAILURE	0x03
 #define WPS_ASSOC_STATE_IP_FAILURE		0x04
 
-/*	=====================P2P Section===================== */
-/*	For P2P */
-#define	P2POUI					0x506F9A09
-
-/*	P2P Attribute ID */
-#define	P2P_ATTR_STATUS				0x00
-#define	P2P_ATTR_MINOR_REASON_CODE		0x01
-#define	P2P_ATTR_CAPABILITY			0x02
-#define	P2P_ATTR_DEVICE_ID			0x03
-#define	P2P_ATTR_GO_INTENT			0x04
-#define	P2P_ATTR_CONF_TIMEOUT			0x05
-#define	P2P_ATTR_LISTEN_CH			0x06
-#define	P2P_ATTR_GROUP_BSSID			0x07
-#define	P2P_ATTR_EX_LISTEN_TIMING		0x08
-#define	P2P_ATTR_INTENTED_IF_ADDR		0x09
-#define	P2P_ATTR_MANAGEABILITY			0x0A
-#define	P2P_ATTR_CH_LIST			0x0B
-#define	P2P_ATTR_NOA				0x0C
-#define	P2P_ATTR_DEVICE_INFO			0x0D
-#define	P2P_ATTR_GROUP_INFO			0x0E
-#define	P2P_ATTR_GROUP_ID			0x0F
-#define	P2P_ATTR_INTERFACE			0x10
-#define	P2P_ATTR_OPERATING_CH			0x11
-#define	P2P_ATTR_INVITATION_FLAGS		0x12
-
-/*	Value of Status Attribute */
-#define	P2P_STATUS_SUCCESS				0x00
-#define	P2P_STATUS_FAIL_INFO_UNAVAILABLE		0x01
-#define	P2P_STATUS_FAIL_INCOMPATIBLE_PARAM		0x02
-#define	P2P_STATUS_FAIL_LIMIT_REACHED			0x03
-#define	P2P_STATUS_FAIL_INVALID_PARAM			0x04
-#define	P2P_STATUS_FAIL_REQUEST_UNABLE			0x05
-#define	P2P_STATUS_FAIL_PREVOUS_PROTO_ERR		0x06
-#define	P2P_STATUS_FAIL_NO_COMMON_CH			0x07
-#define	P2P_STATUS_FAIL_UNKNOWN_P2PGROUP		0x08
-#define	P2P_STATUS_FAIL_BOTH_GOINTENT_15		0x09
-#define	P2P_STATUS_FAIL_INCOMPATIBLE_PROVSION		0x0A
-#define	P2P_STATUS_FAIL_USER_REJECT			0x0B
-
-/*	Value of Invitation Flags Attribute */
-
-/*	Value of Device Capability Bitmap */
-#define	P2P_DEVCAP_SERVICE_DISCOVERY		BIT(0)
-#define	P2P_DEVCAP_CLIENT_DISCOVERABILITY	BIT(1)
-#define	P2P_DEVCAP_CONCURRENT_OPERATION		BIT(2)
-#define	P2P_DEVCAP_INFRA_MANAGED		BIT(3)
-#define	P2P_DEVCAP_DEVICE_LIMIT			BIT(4)
-#define	P2P_DEVCAP_INVITATION_PROC		BIT(5)
-
-/*	Value of Group Capability Bitmap */
-#define	P2P_GRPCAP_GO				BIT(0)
-#define	P2P_GRPCAP_PERSISTENT_GROUP		BIT(1)
-#define	P2P_GRPCAP_GROUP_LIMIT			BIT(2)
-#define	P2P_GRPCAP_INTRABSS			BIT(3)
-#define	P2P_GRPCAP_CROSS_CONN			BIT(4)
-#define	P2P_GRPCAP_PERSISTENT_RECONN		BIT(5)
-#define	P2P_GRPCAP_GROUP_FORMATION		BIT(6)
-
-/*	P2P Public Action Frame (Management Frame) */
-#define	P2P_PUB_ACTION_ACTION			0x09
-
-/*	P2P Public Action Frame Type */
-#define	P2P_GO_NEGO_REQ				0
-#define	P2P_GO_NEGO_RESP			1
-#define	P2P_GO_NEGO_CONF			2
-#define	P2P_INVIT_REQ				3
-#define	P2P_INVIT_RESP				4
-#define	P2P_DEVDISC_REQ				5
-#define	P2P_DEVDISC_RESP			6
-#define	P2P_PROVISION_DISC_REQ			7
-#define	P2P_PROVISION_DISC_RESP			8
-
-/*	P2P Action Frame Type */
-#define	P2P_NOTICE_OF_ABSENCE			0
-#define	P2P_PRESENCE_REQUEST			1
-#define	P2P_PRESENCE_RESPONSE			2
-#define	P2P_GO_DISC_REQUEST			3
-
-#define	P2P_PROVISIONING_SCAN_CNT		3
-
-/* default value, used when: (1)p2p disabled or (2)p2p enabled
- * but only do 1 scan phase
- */
-#define	P2P_FINDPHASE_EX_NONE		0
-/*  used when p2p enabled and want to do 1 scan phase and
- *  P2P_FINDPHASE_EX_MAX-1 find phase
- */
-#define	P2P_FINDPHASE_EX_FULL		1
-#define	P2P_FINDPHASE_EX_SOCIAL_FIRST	(P2P_FINDPHASE_EX_FULL+1)
-#define	P2P_FINDPHASE_EX_MAX		4
-#define	P2P_FINDPHASE_EX_SOCIAL_LAST	P2P_FINDPHASE_EX_MAX
-
-/* 5 seconds timeout for sending the provision discovery request */
-#define	P2P_PROVISION_TIMEOUT		5000
-/* 3 seconds timeout for sending the prov disc request concurrent mode */
-#define	P2P_CONCURRENT_PROVISION_TIME	3000
-/* 5 seconds timeout for receiving the group negotiation response */
-#define	P2P_GO_NEGO_TIMEOUT		5000
-/* 3 seconds timeout for sending the negotiation request under concurrent mode */
-#define	P2P_CONCURRENT_GO_NEGO_TIME	3000
-/* 100ms */
-#define	P2P_TX_PRESCAN_TIMEOUT		100
-/* 5 seconds timeout for sending the invitation request */
-#define	P2P_INVITE_TIMEOUT		5000
-/* 3 seconds timeout for sending the invitation request under concurrent mode */
-#define	P2P_CONCURRENT_INVITE_TIME	3000
-/* 25 seconds timeout to reset the scan channel (based on channel plan) */
-#define	P2P_RESET_SCAN_CH		25000
-#define	P2P_MAX_INTENT			15
-
 /*	WPS Configuration Method */
 #define	WPS_CM_NONE			0x0000
 #define	WPS_CM_LABEL			0x0004