nl80211: Update ERP info using NL80211_CMD_UPDATE_CONNECT_PARAMS

Use NL80211_CMD_UPDATE_CONNECT_PARAMS to update new ERP information,
Association IEs and the Authentication type to driver / firmware which
will be used in subsequent roamings.
Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org>
[arend: extended fils-sk kernel doc and added check in wiphy_register()]
Reviewed-by: Jithu Jance <jithu.jance@broadcom.com>
Reviewed-by: Eylon Pedinovsky <eylon.pedinovsky@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

include/net/cfg80211.h

@@ -2225,9 +2225,14 @@ struct cfg80211_connect_params {
  * have to be updated as part of update_connect_params() call.
  *
  * @UPDATE_ASSOC_IES: Indicates whether association request IEs are updated
+ * @UPDATE_FILS_ERP_INFO: Indicates that FILS connection parameters (realm,
+ *	username, erp sequence number and rrk) are updated
+ * @UPDATE_AUTH_TYPE: Indicates that authentication type is updated
  */
 enum cfg80211_connect_params_changed {
 	UPDATE_ASSOC_IES		= BIT(0),
+	UPDATE_FILS_ERP_INFO		= BIT(1),
+	UPDATE_AUTH_TYPE		= BIT(2),
 };
 
 /**

include/uapi/linux/nl80211.h

@@ -204,7 +204,8 @@
  * FILS shared key authentication offload should be able to construct the
  * authentication and association frames for FILS shared key authentication and
  * eventually do a key derivation as per IEEE 802.11ai. The below additional
- * parameters should be given to driver in %NL80211_CMD_CONNECT.
+ * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in
+ * %NL80211_CMD_UPDATE_CONNECT_PARAMS.
  *	%NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
  *	%NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
  *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message

net/wireless/core.c

@@ -725,6 +725,10 @@ int wiphy_register(struct wiphy *wiphy)
 		    (!rdev->ops->set_pmk || !rdev->ops->del_pmk)))
 		return -EINVAL;
 
+	if (WARN_ON(!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_FW_ROAM) &&
+		    rdev->ops->update_connect_params))
+		return -EINVAL;
+
 	if (wiphy->addresses)
 		memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
 

net/wireless/nl80211.c

@@ -9429,6 +9429,8 @@ static int nl80211_update_connect_params(struct sk_buff *skb,
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	struct net_device *dev = info->user_ptr[1];
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	bool fils_sk_offload;
+	u32 auth_type;
 	u32 changed = 0;
 	int ret;
 
@@ -9443,6 +9445,56 @@ static int nl80211_update_connect_params(struct sk_buff *skb,
 		changed |= UPDATE_ASSOC_IES;
 	}
 
+	fils_sk_offload = wiphy_ext_feature_isset(&rdev->wiphy,
+						  NL80211_EXT_FEATURE_FILS_SK_OFFLOAD);
+
+	/*
+	 * when driver supports fils-sk offload all attributes must be
+	 * provided. So the else covers "fils-sk-not-all" and
+	 * "no-fils-sk-any".
+	 */
+	if (fils_sk_offload &&
+	    info->attrs[NL80211_ATTR_FILS_ERP_USERNAME] &&
+	    info->attrs[NL80211_ATTR_FILS_ERP_REALM] &&
+	    info->attrs[NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM] &&
+	    info->attrs[NL80211_ATTR_FILS_ERP_RRK]) {
+		connect.fils_erp_username =
+			nla_data(info->attrs[NL80211_ATTR_FILS_ERP_USERNAME]);
+		connect.fils_erp_username_len =
+			nla_len(info->attrs[NL80211_ATTR_FILS_ERP_USERNAME]);
+		connect.fils_erp_realm =
+			nla_data(info->attrs[NL80211_ATTR_FILS_ERP_REALM]);
+		connect.fils_erp_realm_len =
+			nla_len(info->attrs[NL80211_ATTR_FILS_ERP_REALM]);
+		connect.fils_erp_next_seq_num =
+			nla_get_u16(
+			   info->attrs[NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM]);
+		connect.fils_erp_rrk =
+			nla_data(info->attrs[NL80211_ATTR_FILS_ERP_RRK]);
+		connect.fils_erp_rrk_len =
+			nla_len(info->attrs[NL80211_ATTR_FILS_ERP_RRK]);
+		changed |= UPDATE_FILS_ERP_INFO;
+	} else if (info->attrs[NL80211_ATTR_FILS_ERP_USERNAME] ||
+		   info->attrs[NL80211_ATTR_FILS_ERP_REALM] ||
+		   info->attrs[NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM] ||
+		   info->attrs[NL80211_ATTR_FILS_ERP_RRK]) {
+		return -EINVAL;
+	}
+
+	if (info->attrs[NL80211_ATTR_AUTH_TYPE]) {
+		auth_type = nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
+		if (!nl80211_valid_auth_type(rdev, auth_type,
+					     NL80211_CMD_CONNECT))
+			return -EINVAL;
+
+		if (auth_type == NL80211_AUTHTYPE_FILS_SK &&
+		    fils_sk_offload && !(changed & UPDATE_FILS_ERP_INFO))
+			return -EINVAL;
+
+		connect.auth_type = auth_type;
+		changed |= UPDATE_AUTH_TYPE;
+	}
+
 	wdev_lock(dev->ieee80211_ptr);
 	if (!wdev->current_bss)
 		ret = -ENOLINK;