Merge tag 'irqchip-4.16' of...

Merge tag 'irqchip-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates for 4.16 from Marc Zyngier

- Fix a GICv3 issue when parsing ACPI entries for disabled CPUs
- Driver for the MIPS Goldfish virtual platform
- Small fixlet for the ompic driver
- Interrupt polarity support for the Raspberry Pi irqchip

Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt

@@ -12,7 +12,7 @@ Required properties:
 			  registers
 - interrupt-controller:	Identifies the node as an interrupt controller
 - #interrupt-cells:	Specifies the number of cells needed to encode an
-			  interrupt source. The value shall be 1
+			  interrupt source. The value shall be 2
 
 Please refer to interrupts.txt in this directory for details of the common
 Interrupt Controllers bindings used by client devices.
@@ -32,6 +32,6 @@ local_intc: local_intc {
 	compatible = "brcm,bcm2836-l1-intc";
 	reg = <0x40000000 0x100>;
 	interrupt-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-parent = <&local_intc>;
 };

Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt

+Android Goldfish PIC
+
+Android Goldfish programmable interrupt device used by Android
+emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-pic"
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example for mips when used in cascade mode:
+
+        cpuintc {
+                #interrupt-cells = <0x1>;
+                #address-cells = <0>;
+                interrupt-controller;
+                compatible = "mti,cpu-interrupt-controller";
+        };
+
+        interrupt-controller@1f000000 {
+                compatible = "google,goldfish-pic";
+                reg = <0x1f000000 0x1000>;
+
+                interrupt-controller;
+                #interrupt-cells = <0x1>;
+
+                interrupt-parent = <&cpuintc>;
+                interrupts = <0x2>;
+        };

MAINTAINERS

@@ -867,6 +867,12 @@ S:	Supported
 F:	drivers/android/
 F:	drivers/staging/android/
 
+ANDROID GOLDFISH PIC DRIVER
+M:	Miodrag Dinic <miodrag.dinic@mips.com>
+S:	Supported
+F:	Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt
+F:	drivers/irqchip/irq-goldfish-pic.c
+
 ANDROID GOLDFISH RTC DRIVER
 M:	Miodrag Dinic <miodrag.dinic@mips.com>
 S:	Supported

arch/arm/boot/dts/bcm2836.dtsi

@@ -13,24 +13,24 @@ local_intc: local_intc {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&local_intc>;
 		};
 
 		arm-pmu {
 			compatible = "arm,cortex-a7-pmu";
 			interrupt-parent = <&local_intc>;
-			interrupts = <9>;
+			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupt-parent = <&local_intc>;
-		interrupts = <0>, // PHYS_SECURE_PPI
-			     <1>, // PHYS_NONSECURE_PPI
-			     <3>, // VIRT_PPI
-			     <2>; // HYP_PPI
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
 		always-on;
 	};
 
@@ -76,7 +76,7 @@ &intc {
 	compatible = "brcm,bcm2836-armctrl-ic";
 	reg = <0x7e00b200 0x200>;
 	interrupt-parent = <&local_intc>;
-	interrupts = <8>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &cpu_thermal {

arch/arm/boot/dts/bcm2837.dtsi

@@ -12,7 +12,7 @@ local_intc: local_intc {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&local_intc>;
 		};
 	};
@@ -20,10 +20,10 @@ local_intc: local_intc {
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupt-parent = <&local_intc>;
-		interrupts = <0>, // PHYS_SECURE_PPI
-			     <1>, // PHYS_NONSECURE_PPI
-			     <3>, // VIRT_PPI
-			     <2>; // HYP_PPI
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
 		always-on;
 	};
 
@@ -73,7 +73,7 @@ &intc {
 	compatible = "brcm,bcm2836-armctrl-ic";
 	reg = <0x7e00b200 0x200>;
 	interrupt-parent = <&local_intc>;
-	interrupts = <8>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &cpu_thermal {

arch/arm/boot/dts/bcm283x.dtsi

@@ -2,6 +2,7 @@
 #include <dt-bindings/clock/bcm2835.h>
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 /* firmware-provided startup stubs live here, where the secondary CPUs are
  * spinning.

drivers/irqchip/Kconfig

@@ -343,4 +343,12 @@ config MESON_IRQ_GPIO
        help
          Support Meson SoC Family GPIO Interrupt Multiplexer
 
+config GOLDFISH_PIC
+       bool "Goldfish programmable interrupt controller"
+       depends on MIPS && (GOLDFISH || COMPILE_TEST)
+       select IRQ_DOMAIN
+       help
+         Say yes here to enable Goldfish interrupt controller driver used
+         for Goldfish based virtual platforms.
+
 endmenu

drivers/irqchip/Makefile

@@ -84,3 +84,4 @@ obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
 obj-$(CONFIG_IRQ_UNIPHIER_AIDET)	+= irq-uniphier-aidet.o
 obj-$(CONFIG_ARCH_SYNQUACER)		+= irq-sni-exiu.o
 obj-$(CONFIG_MESON_IRQ_GPIO)		+= irq-meson-gpio.o
+obj-$(CONFIG_GOLDFISH_PIC) 		+= irq-goldfish-pic.o

drivers/irqchip/irq-bcm2836.c

@@ -98,13 +98,35 @@ static struct irq_chip bcm2836_arm_irqchip_gpu = {
 	.irq_unmask	= bcm2836_arm_irqchip_unmask_gpu_irq,
 };
 
-static void bcm2836_arm_irqchip_register_irq(int hwirq, struct irq_chip *chip)
-{
-	int irq = irq_create_mapping(intc.domain, hwirq);
+static int bcm2836_map(struct irq_domain *d, unsigned int irq,
+		       irq_hw_number_t hw)
+{
+	struct irq_chip *chip;
+
+	switch (hw) {
+	case LOCAL_IRQ_CNTPSIRQ:
+	case LOCAL_IRQ_CNTPNSIRQ:
+	case LOCAL_IRQ_CNTHPIRQ:
+	case LOCAL_IRQ_CNTVIRQ:
+		chip = &bcm2836_arm_irqchip_timer;
+		break;
+	case LOCAL_IRQ_GPU_FAST:
+		chip = &bcm2836_arm_irqchip_gpu;
+		break;
+	case LOCAL_IRQ_PMU_FAST:
+		chip = &bcm2836_arm_irqchip_pmu;
+		break;
+	default:
+		pr_warn_once("Unexpected hw irq: %lu\n", hw);
+		return -EINVAL;
+	}
 
 	irq_set_percpu_devid(irq);
-	irq_set_chip_and_handler(irq, chip, handle_percpu_devid_irq);
+	irq_domain_set_info(d, irq, hw, chip, d->host_data,
+			    handle_percpu_devid_irq, NULL, NULL);
 	irq_set_status_flags(irq, IRQ_NOAUTOEN);
+
+	return 0;
 }
 
 static void
@@ -165,7 +187,8 @@ static int bcm2836_cpu_dying(unsigned int cpu)
 #endif
 
 static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = {
-	.xlate = irq_domain_xlate_onecell
+	.xlate = irq_domain_xlate_onetwocell,
+	.map = bcm2836_map,
 };
 
 static void
@@ -218,19 +241,6 @@ static int __init bcm2836_arm_irqchip_l1_intc_of_init(struct device_node *node,
 	if (!intc.domain)
 		panic("%pOF: unable to create IRQ domain\n", node);
 
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTPSIRQ,
-					 &bcm2836_arm_irqchip_timer);
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTPNSIRQ,
-					 &bcm2836_arm_irqchip_timer);
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTHPIRQ,
-					 &bcm2836_arm_irqchip_timer);
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_CNTVIRQ,
-					 &bcm2836_arm_irqchip_timer);
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_GPU_FAST,
-					 &bcm2836_arm_irqchip_gpu);
-	bcm2836_arm_irqchip_register_irq(LOCAL_IRQ_PMU_FAST,
-					 &bcm2836_arm_irqchip_pmu);
-
 	bcm2836_arm_irqchip_smp_init();
 
 	set_handle_irq(bcm2836_arm_irqchip_handle_irq);

drivers/irqchip/irq-gic-v3.c

@@ -1331,6 +1331,10 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header,
 	u32 size = reg == GIC_PIDR2_ARCH_GICv4 ? SZ_64K * 4 : SZ_64K * 2;
 	void __iomem *redist_base;
 
+	/* GICC entry which has !ACPI_MADT_ENABLED is not unusable so skip */
+	if (!(gicc->flags & ACPI_MADT_ENABLED))
+		return 0;
+
 	redist_base = ioremap(gicc->gicr_base_address, size);
 	if (!redist_base)
 		return -ENOMEM;
@@ -1380,6 +1384,13 @@ static int __init gic_acpi_match_gicc(struct acpi_subtable_header *header,
 	if ((gicc->flags & ACPI_MADT_ENABLED) && gicc->gicr_base_address)
 		return 0;
 
+	/*
+	 * It's perfectly valid firmware can pass disabled GICC entry, driver
+	 * should not treat as errors, skip the entry instead of probe fail.
+	 */
+	if (!(gicc->flags & ACPI_MADT_ENABLED))
+		return 0;
+
 	return -ENODEV;
 }
 

drivers/irqchip/irq-goldfish-pic.c

+/*
+ * Driver for MIPS Goldfish Programmable Interrupt Controller.
+ *
+ * Author: Miodrag Dinic <miodrag.dinic@mips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define GFPIC_NR_IRQS			32
+
+/* 8..39 Cascaded Goldfish PIC interrupts */
+#define GFPIC_IRQ_BASE			8
+
+#define GFPIC_REG_IRQ_PENDING		0x04
+#define GFPIC_REG_IRQ_DISABLE_ALL	0x08
+#define GFPIC_REG_IRQ_DISABLE		0x0c
+#define GFPIC_REG_IRQ_ENABLE		0x10
+
+struct goldfish_pic_data {
+	void __iomem *base;
+	struct irq_domain *irq_domain;
+};
+
+static void goldfish_pic_cascade(struct irq_desc *desc)
+{
+	struct goldfish_pic_data *gfpic = irq_desc_get_handler_data(desc);
+	struct irq_chip *host_chip = irq_desc_get_chip(desc);
+	u32 pending, hwirq, virq;
+
+	chained_irq_enter(host_chip, desc);
+
+	pending = readl(gfpic->base + GFPIC_REG_IRQ_PENDING);
+	while (pending) {
+		hwirq = __fls(pending);
+		virq = irq_linear_revmap(gfpic->irq_domain, hwirq);
+		generic_handle_irq(virq);
+		pending &= ~(1 << hwirq);
+	}
+
+	chained_irq_exit(host_chip, desc);
+}
+
+static const struct irq_domain_ops goldfish_irq_domain_ops = {
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int __init goldfish_pic_of_init(struct device_node *of_node,
+				       struct device_node *parent)
+{
+	struct goldfish_pic_data *gfpic;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	unsigned int parent_irq;
+	int ret = 0;
+
+	gfpic = kzalloc(sizeof(*gfpic), GFP_KERNEL);
+	if (!gfpic) {
+		ret = -ENOMEM;
+		goto out_err;
+	}
+
+	parent_irq = irq_of_parse_and_map(of_node, 0);
+	if (!parent_irq) {
+		pr_err("Failed to map parent IRQ!\n");
+		ret = -EINVAL;
+		goto out_free;
+	}
+
+	gfpic->base = of_iomap(of_node, 0);
+	if (!gfpic->base) {
+		pr_err("Failed to map base address!\n");
+		ret = -ENOMEM;
+		goto out_unmap_irq;
+	}
+
+	/* Mask interrupts. */
+	writel(1, gfpic->base + GFPIC_REG_IRQ_DISABLE_ALL);
+
+	gc = irq_alloc_generic_chip("GFPIC", 1, GFPIC_IRQ_BASE, gfpic->base,
+				    handle_level_irq);
+	if (!gc) {
+		pr_err("Failed to allocate chip structures!\n");
+		ret = -ENOMEM;
+		goto out_iounmap;
+	}
+
+	ct = gc->chip_types;
+	ct->regs.enable = GFPIC_REG_IRQ_ENABLE;
+	ct->regs.disable = GFPIC_REG_IRQ_DISABLE;
+	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+	ct->chip.irq_mask = irq_gc_mask_disable_reg;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(GFPIC_NR_IRQS), 0,
+			       IRQ_NOPROBE | IRQ_LEVEL, 0);
+
+	gfpic->irq_domain = irq_domain_add_legacy(of_node, GFPIC_NR_IRQS,
+						  GFPIC_IRQ_BASE, 0,
+						  &goldfish_irq_domain_ops,
+						  NULL);
+	if (!gfpic->irq_domain) {
+		pr_err("Failed to add irqdomain!\n");
+		ret = -ENOMEM;
+		goto out_destroy_generic_chip;
+	}
+
+	irq_set_chained_handler_and_data(parent_irq,
+					 goldfish_pic_cascade, gfpic);
+
+	pr_info("Successfully registered.\n");
+	return 0;
+
+out_destroy_generic_chip:
+	irq_destroy_generic_chip(gc, IRQ_MSK(GFPIC_NR_IRQS),
+				 IRQ_NOPROBE | IRQ_LEVEL, 0);
+out_iounmap:
+	iounmap(gfpic->base);
+out_unmap_irq:
+	irq_dispose_mapping(parent_irq);
+out_free:
+	kfree(gfpic);
+out_err:
+	pr_err("Failed to initialize! (errno = %d)\n", ret);
+	return ret;
+}
+
+IRQCHIP_DECLARE(google_gf_pic, "google,goldfish-pic", goldfish_pic_of_init);

drivers/irqchip/irq-ompic.c

@@ -171,9 +171,9 @@ static int __init ompic_of_init(struct device_node *node,
 
 	/* Setup the device */
 	ompic_base = ioremap(res.start, resource_size(&res));
-	if (IS_ERR(ompic_base)) {
+	if (!ompic_base) {
 		pr_err("ompic: unable to map registers");
-		return PTR_ERR(ompic_base);
+		return -ENOMEM;
 	}
 
 	irq = irq_of_parse_and_map(node, 0);