Commit 80b0749b authored by Greg Ungerer's avatar Greg Ungerer Committed by Linus Torvalds

[PATCH] m68knommu: common head code for all ColdFire platforms

Create a common head.S for all ColdFire architecture platforms.
Currently there is 20 (yep 20 of them), and they are 95% the
same code. This file with some header file support will replace
all of them.
Signed-off-by: default avatarGreg Ungerer <gerg@snapgear.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 3025e382
/*****************************************************************************/
/*
* head.S -- common startup code for ColdFire CPUs.
*
* (C) Copyright 1999-2004, Greg Ungerer (gerg@snapgear.com).
*/
/*****************************************************************************/
#include <linux/config.h>
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/coldfire.h>
#include <asm/mcfcache.h>
#include <asm/mcfsim.h>
/*****************************************************************************/
/*
* Define fixed memory sizes. Configuration of a fixed memory size
* overrides everything else. If the user defined a size we just
* blindly use it (they know what they are doing right :-)
*/
#if defined(CONFIG_RAM32MB)
#define MEM_SIZE 0x02000000 /* memory size 32Mb */
#elif defined(CONFIG_RAM16MB)
#define MEM_SIZE 0x01000000 /* memory size 16Mb */
#elif defined(CONFIG_RAM8MB)
#define MEM_SIZE 0x00800000 /* memory size 8Mb */
#elif defined(CONFIG_RAM4MB)
#define MEM_SIZE 0x00400000 /* memory size 4Mb */
#elif defined(CONFIG_RAM1MB)
#define MEM_SIZE 0x00100000 /* memory size 1Mb */
#endif
/*
* Memory size exceptions for special cases. Some boards may be set
* for auto memory sizing, but we can't do it that way for some reason.
* For example the 5206eLITE board has static RAM, and auto-detecting
* the SDRAM will do you no good at all.
*/
#ifdef CONFIG_RAMAUTO
#if defined(CONFIG_M5206eLITE)
#define MEM_SIZE 0x00100000 /* 1MiB default memory */
#endif
#endif /* CONFIG_RAMAUTO */
/*
* If we don't have a fixed memory size now, then lets build in code
* to auto detect the DRAM size. Obviously this is the prefered
* method, and should work for most boards (it won't work for those
* that do not have their RAM starting at address 0).
*/
#if defined(MEM_SIZE)
.macro GET_MEM_SIZE
movel #MEM_SIZE,%d0 /* hard coded memory size */
.endm
#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M5249) || defined(CONFIG_M527x) || \
defined(CONFIG_M528x) || defined(CONFIG_M5307) || \
defined(CONFIG_M5407)
/*
* Not all these devices have exactly the same DRAM controller,
* but the DCMR register is virtually identical - give or take
* a couple of bits. The only exception is the 5272 devices, their
* DRAM controller is quite different.
*/
.macro GET_MEM_SIZE
movel MCF_MBAR+MCFSIM_DMR0,%d0 /* get mask for 1st bank */
btst #0,%d0 /* check if region enabled */
beq 1f
andl #0xfffc0000,%d0
beq 1f
addl #0x00040000,%d0 /* convert mask to size */
1:
movel MCF_MBAR+MCFSIM_DMR1,%d1 /* get mask for 2nd bank */
btst #0,%d1 /* check if region enabled */
beq 2f
andl #0xfffc0000, %d1
beq 2f
addl #0x00040000,%d1
addl %d1,%d0 /* total mem size in d0 */
2:
.endm
#elif defined(CONFIG_M5272)
.macro GET_MEMORY_SIZE
movel MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
andil #0xfffff000,%d0 /* mask out chip select options */
negl %d0 /* negate bits */
.endm
#else
#error "ERROR: I don't know how to determine your boards memory size?"
#endif
/*
* Most ColdFire boards have their DRAM starting at address 0.
* Notable exception is the 5206eLITE board.
*/
#if defined(CONFIG_M5206eLITE)
#define MEM_BASE 0x30000000
#endif
#ifndef MEM_BASE
#define MEM_BASE 0x00000000 /* memory base at address 0 */
#endif
/*
* The default location for the vectors is at the base of RAM.
* Some boards might like to use internal SRAM or something like
* that. If no board specific header defines an alternative then
* use the base of RAM.
*/
#ifndef VBR_BASE
#define VBR_BASE MEM_BASE /* vector address */
#endif
/*****************************************************************************/
/*
* Boards and platforms can do specific early hardware setup if
* they need to. Most don't need this, define away if not required.
*/
#ifndef PLATFORM_SETUP
#define PLATFORM_SETUP
#endif
/*****************************************************************************/
.global _start
.global _rambase
.global _ramvec
.global _ramstart
.global _ramend
/*****************************************************************************/
.data
/*
* During startup we store away the RAM setup. These are not in the
* bss, since their values are determined and written before the bss
* has been cleared.
*/
_rambase:
.long 0
_ramvec:
.long 0
_ramstart:
.long 0
_ramend:
.long 0
/*****************************************************************************/
.text
/*
* This is the codes first entry point. This is where it all
* begins...
*/
_start:
nop /* filler */
movew #0x2700, %sr /* no interrupts */
/*
* Do any platform or board specific setup now. Most boards
* don't need anything. Those exceptions are define this in
* their board specific includes.
*/
PLATFORM_SETUP
/*
* Create basic memory configuration. Set VBR accordingly,
* and size memory.
*/
movel #VBR_BASE,%a7
movec %a7,%VBR /* set vectors addr */
movel %a7,_ramvec
movel #MEM_BASE,%a7 /* mark the base of RAM */
movel %a7,_rambase
GET_MEM_SIZE /* macro code determines size */
movel %d0,_ramend /* set end ram addr */
/*
* Now that we know what the memory is, lets enable cache
* and get things moving. This is Coldfire CPU specific.
*/
CACHE_ENABLE /* enable CPU cache */
#ifdef CONFIG_ROMFS_FS
/*
* Move ROM filesystem above bss :-)
*/
lea _sbss,%a0 /* get start of bss */
lea _ebss,%a1 /* set up destination */
movel %a0,%a2 /* copy of bss start */
movel 8(%a0),%d0 /* get size of ROMFS */
addql #8,%d0 /* allow for rounding */
andl #0xfffffffc, %d0 /* whole words */
addl %d0,%a0 /* copy from end */
addl %d0,%a1 /* copy from end */
movel %a1,_ramstart /* set start of ram */
_copy_romfs:
movel -(%a0),%d0 /* copy dword */
movel %d0,-(%a1)
cmpl %a0,%a2 /* check if at end */
bne _copy_romfs
#else /* CONFIG_ROMFS_FS */
lea _ebss,%a1
movel %a1,_ramstart
#endif /* CONFIG_ROMFS_FS */
/*
* Zero out the bss region.
*/
lea _sbss,%a0 /* get start of bss */
lea _ebss,%a1 /* get end of bss */
clrl %d0 /* set value */
_clear_bss:
movel %d0,(%a0)+ /* clear each word */
cmpl %a0,%a1 /* check if at end */
bne _clear_bss
/*
* Load the current task pointer and stack.
*/
lea init_thread_union,%a0
lea THREAD_SIZE(%a0),%sp
/*
* Assember start up done, start code proper.
*/
jsr start_kernel /* start Linux kernel */
_exit:
jmp _exit /* should never get here */
/*****************************************************************************/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment