mfd: stmpe: add pull up/down register offsets for STMPE

This adds the register offsets for pull up/down for the STMPE
1601, 1801 and 24xx expanders. This is used to bias GPIO lines
and keypad lines.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drivers/mfd/stmpe.c

@@ -519,6 +519,7 @@ static const u8 stmpe1601_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE1601_REG_GPIO_SET_DIR_LSB,
 	[STMPE_IDX_GPRER_LSB]	= STMPE1601_REG_GPIO_RE_LSB,
 	[STMPE_IDX_GPFER_LSB]	= STMPE1601_REG_GPIO_FE_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1601_REG_GPIO_PU_LSB,
 	[STMPE_IDX_GPAFR_U_MSB]	= STMPE1601_REG_GPIO_AF_U_MSB,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
 	[STMPE_IDX_ISGPIOR_MSB]	= STMPE1601_REG_INT_STA_GPIO_MSB,
@@ -667,6 +668,7 @@ static const u8 stmpe1801_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE1801_REG_GPIO_SET_DIR_LOW,
 	[STMPE_IDX_GPRER_LSB]	= STMPE1801_REG_GPIO_RE_LOW,
 	[STMPE_IDX_GPFER_LSB]	= STMPE1801_REG_GPIO_FE_LOW,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1801_REG_GPIO_PULL_UP_LOW,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
 	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1801_REG_INT_STA_GPIO_LOW,
 };
@@ -750,6 +752,8 @@ static const u8 stmpe24xx_regs[] = {
 	[STMPE_IDX_GPDR_LSB]	= STMPE24XX_REG_GPDR_LSB,
 	[STMPE_IDX_GPRER_LSB]	= STMPE24XX_REG_GPRER_LSB,
 	[STMPE_IDX_GPFER_LSB]	= STMPE24XX_REG_GPFER_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE24XX_REG_GPPUR_LSB,
+	[STMPE_IDX_GPPDR_LSB]	= STMPE24XX_REG_GPPDR_LSB,
 	[STMPE_IDX_GPAFR_U_MSB]	= STMPE24XX_REG_GPAFR_U_MSB,
 	[STMPE_IDX_IEGPIOR_LSB]	= STMPE24XX_REG_IEGPIOR_LSB,
 	[STMPE_IDX_ISGPIOR_MSB]	= STMPE24XX_REG_ISGPIOR_MSB,

drivers/mfd/stmpe.h

@@ -188,6 +188,7 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STMPE1601_REG_GPIO_ED_MSB		0x8A
 #define STMPE1601_REG_GPIO_RE_LSB		0x8D
 #define STMPE1601_REG_GPIO_FE_LSB		0x8F
+#define STMPE1601_REG_GPIO_PU_LSB		0x91
 #define STMPE1601_REG_GPIO_AF_U_MSB		0x92
 
 #define STMPE1601_SYS_CTRL_ENABLE_GPIO		(1 << 3)
@@ -276,6 +277,8 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STMPE24XX_REG_GPEDR_MSB		0x8C
 #define STMPE24XX_REG_GPRER_LSB		0x91
 #define STMPE24XX_REG_GPFER_LSB		0x94
+#define STMPE24XX_REG_GPPUR_LSB		0x97
+#define STMPE24XX_REG_GPPDR_LSB		0x9a
 #define STMPE24XX_REG_GPAFR_U_MSB	0x9B
 
 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO		(1 << 3)

include/linux/mfd/stmpe.h

@@ -50,6 +50,8 @@ enum {
 	STMPE_IDX_GPEDR_MSB,
 	STMPE_IDX_GPRER_LSB,
 	STMPE_IDX_GPFER_LSB,
+	STMPE_IDX_GPPUR_LSB,
+	STMPE_IDX_GPPDR_LSB,
 	STMPE_IDX_GPAFR_U_MSB,
 	STMPE_IDX_IEGPIOR_LSB,
 	STMPE_IDX_ISGPIOR_LSB,