Commit 81fefdf2 authored by Artem Bityutskiy's avatar Artem Bityutskiy Committed by David Woodhouse

mtd: spear_smi: initialize writebufsize

The writebufsize concept was introduce by commit
"0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents
the maximum amount of data the device writes to the media at a time. This is
an important parameter for UBIFS which is used during recovery and which
basically defines how big a corruption caused by a power cut can be.

Set writebufsize to the flash page size because it is the maximum amount of
data it writes at a time.
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: default avatarStefan Roese <sr@denx.de>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent fcc44a07
...@@ -845,6 +845,7 @@ static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank) ...@@ -845,6 +845,7 @@ static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank)
flash->mtd.size = flash_info->size; flash->mtd.size = flash_info->size;
flash->mtd.erasesize = flash_devices[flash_index].sectorsize; flash->mtd.erasesize = flash_devices[flash_index].sectorsize;
flash->page_size = flash_devices[flash_index].pagesize; flash->page_size = flash_devices[flash_index].pagesize;
flash->mtd.writebufsize = flash->page_size;
flash->erase_cmd = flash_devices[flash_index].erase_cmd; flash->erase_cmd = flash_devices[flash_index].erase_cmd;
flash->mtd._erase = spear_mtd_erase; flash->mtd._erase = spear_mtd_erase;
flash->mtd._read = spear_mtd_read; flash->mtd._read = spear_mtd_read;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment