i40e: Change some messages from info to debug only

There are several error messages that have been printing when there is
no functional issue. These messages should be available at debug message
level only.

Change-ID: Id91e47bf942c483563995f30d8705fa53acd5aa3
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c

@@ -240,10 +240,9 @@ static void i40e_dcbnl_del_app(struct i40e_pf *pf,
 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 		if (pf->vsi[v] && pf->vsi[v]->netdev) {
 			err = i40e_dcbnl_vsi_del_app(pf->vsi[v], app);
-			if (err)
-				dev_info(&pf->pdev->dev, "Failed deleting app for VSI seid=%d err=%d sel=%d proto=0x%x prio=%d\n",
-					 pf->vsi[v]->seid, err, app->selector,
-					 app->protocolid, app->priority);
+			dev_dbg(&pf->pdev->dev, "Deleting app for VSI seid=%d err=%d sel=%d proto=0x%x prio=%d\n",
+				pf->vsi[v]->seid, err, app->selector,
+				app->protocolid, app->priority);
 		}
 	}
 }

drivers/net/ethernet/intel/i40e/i40e_fcoe.c

@@ -284,7 +284,7 @@ void i40e_init_pf_fcoe(struct i40e_pf *pf)
 	pf->fcoe_hmc_filt_num = 0;
 
 	if (!pf->hw.func_caps.fcoe) {
-		dev_info(&pf->pdev->dev, "FCoE capability is disabled\n");
+		dev_dbg(&pf->pdev->dev, "FCoE capability is disabled\n");
 		return;
 	}
 

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -6593,9 +6593,9 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
 	/* make sure our flow control settings are restored */
 	ret = i40e_set_fc(&pf->hw, &set_fc_aq_fail, true);
 	if (ret)
-		dev_info(&pf->pdev->dev, "set fc fail, err %s aq_err %s\n",
-			 i40e_stat_str(&pf->hw, ret),
-			 i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+		dev_dbg(&pf->pdev->dev, "setting flow control: ret = %s last_status = %s\n",
+			i40e_stat_str(&pf->hw, ret),
+			i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
 
 	/* Rebuild the VSIs and VEBs that existed before reset.
 	 * They are still in our local switch element arrays, so only
@@ -9847,8 +9847,14 @@ static void i40e_determine_queue_usage(struct i40e_pf *pf)
 	}
 
 	pf->queues_left = queues_left;
+	dev_dbg(&pf->pdev->dev,
+		"qs_avail=%d FD SB=%d lan_qs=%d lan_tc0=%d vf=%d*%d vmdq=%d*%d, remaining=%d\n",
+		pf->hw.func_caps.num_tx_qp,
+		!!(pf->flags & I40E_FLAG_FD_SB_ENABLED),
+		pf->num_lan_qps, pf->rss_size, pf->num_req_vfs, pf->num_vf_qps,
+		pf->num_vmdq_vsis, pf->num_vmdq_qps, queues_left);
 #ifdef I40E_FCOE
-	dev_info(&pf->pdev->dev, "fcoe queues = %d\n", pf->num_fcoe_qps);
+	dev_dbg(&pf->pdev->dev, "fcoe queues = %d\n", pf->num_fcoe_qps);
 #endif
 }
 
@@ -10333,10 +10339,9 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* get the requested speeds from the fw */
 	err = i40e_aq_get_phy_capabilities(hw, false, false, &abilities, NULL);
 	if (err)
-		dev_info(&pf->pdev->dev,
-			 "get phy capabilities failed, err %s aq_err %s, advertised speed settings may not be correct\n",
-			 i40e_stat_str(&pf->hw, err),
-			 i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+		dev_dbg(&pf->pdev->dev, "get requested speeds ret =  %s last_status =  %s\n",
+			i40e_stat_str(&pf->hw, err),
+			i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
 	pf->hw.phy.link_info.requested_speeds = abilities.link_speed;
 
 	/* get the supported phy types from the fw */