mtd: docg3: initialize writebufsize

The writebufsize concept was introduce by commit
"0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents
the maximum amount of data the device writes to the media at a time. This is
an important parameter for UBIFS which is used during recovery and which
basically defines how big a corruption caused by a power cut can be.

Set it to be equivalent to mtd->writesize because this is the maximum amount
of data the driver writes at a time.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: stable@kernel.org [3.2+]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

drivers/mtd/devices/docg3.c

@@ -1817,7 +1817,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
 	mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES;
 	if (docg3->reliable == 2)
 		mtd->erasesize /= 2;
-	mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
+	mtd->writebufsize = mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
 	mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
 	mtd->owner = THIS_MODULE;
 	mtd->_erase = doc_erase;