mpc5200: support for the MAN mpc5200 based board mucmc52

- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- IDE support
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

arch/powerpc/boot/dts/mucmc52.dts

+/*
+ * Manroland mucmc52 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "manroland,mucmc52";
+	compatible = "manroland,mucmc52";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		gpt0: timer@600 {	// GPT 0 in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 { /* PSC1 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2200 { /* PSC2 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		serial@2c00 { /* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>; 	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>; 	// these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				compatible = "intel,lxt971";
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IDSEL 0x10 */
+				0x8000 0 0 1 &mpc5200_pic 0 3 3
+				0x8000 0 0 2 &mpc5200_pic 0 3 3
+				0x8000 0 0 3 &mpc5200_pic 0 2 3
+				0x8000 0 0 4 &mpc5200_pic 0 1 3
+				>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00020000>;
+			};
+			partition@760000 {
+				label = "red. Env";
+				reg = <0x00760000 0x00020000>;
+			};
+			partition@780000 {
+				label = "reserve";
+				reg = <0x00780000 0x00080000>;
+			};
+		};
+
+		simple100: gpio-controller-100@3,600100 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600100 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple104: gpio-controller-104@3,600104 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600104 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple200: gpio-controller-200@3,600200 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600200 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple201: gpio-controller-201@3,600201 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600201 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple202: gpio-controller-202@3,600202 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600202 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple203: gpio-controller-203@3,600203 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600203 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple204: gpio-controller-204@3,600204 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600204 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple206: gpio-controller-206@3,600206 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600206 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple207: gpio-controller-207@3,600207 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600207 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple20f: gpio-controller-20f@3,60020f {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x0060020f 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};

arch/powerpc/configs/mpc5200_defconfig

@@ -205,7 +205,7 @@ CONFIG_RTAS_PROC=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_PPC_BESTCOMM_ATA=y
 CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_SIMPLE_GPIO is not set
+CONFIG_SIMPLE_GPIO=y
 
 #
 # Kernel options

arch/powerpc/platforms/52xx/mpc5200_simple.c

@@ -51,6 +51,7 @@ static void __init mpc5200_simple_setup_arch(void)
 /* list of the supported boards */
 static char *board[] __initdata = {
 	"intercontrol,digsy-mtc",
+	"manroland,mucmc52",
 	"manroland,uc101",
 	"phytec,pcm030",
 	"phytec,pcm032",