HID: sensors: autodetect USB HID sensor hubs

It should not be necessary to add IDs for HID sensor hubs to lists in
hid-core.c and hid-sensor-hub.c. So instead of a whitelist, autodetect such USB
HID sensor hubs, based on a collection of type physical inside a useage page of
type sensor. If some sensor hubs stil must be usable as raw devices, a
blacklist might be created.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Acked-by: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/hid/hid-core.c

@@ -713,7 +713,12 @@ static int hid_scan_report(struct hid_device *hid)
 					hid_scan_usage(hid, u);
 				break;
 			}
-		}
+		} else if (page == HID_UP_SENSOR &&
+			item.type == HID_ITEM_TYPE_MAIN &&
+			item.tag == HID_MAIN_ITEM_TAG_BEGIN_COLLECTION &&
+			(item_udata(&item) & 0xff) == HID_COLLECTION_PHYSICAL &&
+			hid->bus == BUS_USB)
+			hid->group = HID_GROUP_SENSOR_HUB;
 	}
 
 	return 0;
@@ -1465,6 +1470,10 @@ EXPORT_SYMBOL_GPL(hid_disconnect);
  * there is a proper autodetection and autoloading in place (based on presence
  * of HID_DG_CONTACTID), so those devices don't need to be added to this list,
  * as we are doing the right thing in hid_scan_usage().
+ *
+ * Autodetection for (USB) HID sensor hubs exists too. If a collection of type
+ * physical is found inside a usage page of type sensor, hid-sensor-hub will be
+ * used as a driver. See hid_scan_report().
  */
 static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },

drivers/hid/hid-sensor-hub.c

@@ -82,23 +82,6 @@ struct hid_sensor_hub_callbacks_list {
 	void *priv;
 };
 
-static int sensor_hub_check_for_sensor_page(struct hid_device *hdev)
-{
-	int i;
-	int ret = -EINVAL;
-
-	for (i = 0; i < hdev->maxcollection; i++) {
-		struct hid_collection *col = &hdev->collection[i];
-		if (col->type == HID_COLLECTION_PHYSICAL &&
-		   (col->usage & HID_USAGE_PAGE) == HID_UP_SENSOR) {
-			ret = 0;
-			break;
-		}
-	}
-
-	return ret;
-}
-
 static struct hid_report *sensor_hub_report(int id, struct hid_device *hdev,
 						int dir)
 {
@@ -524,10 +507,6 @@ static int sensor_hub_probe(struct hid_device *hdev,
 		hid_err(hdev, "parse failed\n");
 		goto err_free;
 	}
-	if (sensor_hub_check_for_sensor_page(hdev) < 0) {
-		hid_err(hdev, "sensor page not found\n");
-		goto err_free;
-	}
 	INIT_LIST_HEAD(&hdev->inputs);
 
 	ret = hid_hw_start(hdev, 0);
@@ -630,16 +609,7 @@ static void sensor_hub_remove(struct hid_device *hdev)
 }
 
 static const struct hid_device_id sensor_hub_devices[] = {
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8086,
-			USB_DEVICE_ID_SENSOR_HUB_1020) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8087,
-			USB_DEVICE_ID_SENSOR_HUB_1020) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8086,
-			USB_DEVICE_ID_SENSOR_HUB_09FA) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8087,
-			USB_DEVICE_ID_SENSOR_HUB_09FA) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM,
-			USB_DEVICE_ID_SENSOR_HUB_7014) },
+	{ HID_DEVICE(BUS_USB, HID_GROUP_SENSOR_HUB, HID_ANY_ID, HID_ANY_ID) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, sensor_hub_devices);

include/linux/hid-sensor-ids.h

@@ -19,7 +19,6 @@
 #ifndef _HID_SENSORS_IDS_H
 #define _HID_SENSORS_IDS_H
 
-#define HID_UP_SENSOR						0x00200000
 #define HID_MAX_PHY_DEVICES					0xFF
 
 /* Accel 3D (200073) */

include/linux/hid.h

@@ -167,6 +167,7 @@ struct hid_item {
 #define HID_UP_MSVENDOR		0xff000000
 #define HID_UP_CUSTOM		0x00ff0000
 #define HID_UP_LOGIVENDOR	0xffbc0000
+#define HID_UP_SENSOR		0x00200000
 
 #define HID_USAGE		0x0000ffff
 
@@ -292,6 +293,7 @@ struct hid_item {
  */
 #define HID_GROUP_GENERIC			0x0001
 #define HID_GROUP_MULTITOUCH			0x0002
+#define HID_GROUP_SENSOR_HUB			0x0003
 
 /*
  * This is the global environment of the parser. This information is