Commit 8353ec7b authored by Anton Vorontsov's avatar Anton Vorontsov Committed by Kumar Gala

cpmac: convert to new Fixed PHY infrastructure

This patch converts cpmac to the new Fixed PHY infrastructure, though it
doesn't fix all the problems with that driver. I didn't even bother to
test this patch to compile, because cpmac driver is broken in several ways:

1. This driver won't compile by itself because lack of its header describing
   platform data;
2. It assumes that fixed PHYs should be created by the ethernet driver.
   It is wrong assumption: fixed PHYs creation is platform code authority,
   driver must blindly accept bus_id and phy_id platform data variables
   instead.

Also, it seem that that driver doesn't have actual in-tree users, so
nothing to fix further.

The main purpose of that patch is to get rid of the following Kconfig
warning:

scripts/kconfig/conf -s arch/powerpc/Kconfig
drivers/net/Kconfig:1713:warning: 'select' used by config symbol
'CPMAC' refers to undefined symbol 'FIXED_MII_100_FDX'
Signed-off-by: default avatarAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 9ef9dc69
......@@ -1738,10 +1738,8 @@ config SC92031
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
depends on NET_ETHERNET && EXPERIMENTAL && AR7
depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
select PHYLIB
select FIXED_PHY
select FIXED_MII_100_FDX
help
TI AR7 CPMAC Ethernet support
......
......@@ -845,15 +845,6 @@ static void cpmac_adjust_link(struct net_device *dev)
spin_unlock(&priv->lock);
}
static int cpmac_link_update(struct net_device *dev,
struct fixed_phy_status *status)
{
status->link = 1;
status->speed = 100;
status->duplex = 1;
return 0;
}
static int cpmac_open(struct net_device *dev)
{
int i, size, res;
......@@ -996,11 +987,11 @@ static int external_switch;
static int __devinit cpmac_probe(struct platform_device *pdev)
{
int rc, phy_id, i;
int mdio_bus_id = cpmac_mii.id;
struct resource *mem;
struct cpmac_priv *priv;
struct net_device *dev;
struct plat_cpmac_data *pdata;
struct fixed_info *fixed_phy;
DECLARE_MAC_BUF(mac);
pdata = pdev->dev.platform_data;
......@@ -1014,9 +1005,23 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
}
if (phy_id == PHY_MAX_ADDR) {
if (external_switch || dumb_switch)
if (external_switch || dumb_switch) {
struct fixed_phy_status status = {};
mdio_bus_id = 0;
/*
* FIXME: this should be in the platform code!
* Since there is not platform code at all (that is,
* no mainline users of that driver), place it here
* for now.
*/
phy_id = 0;
else {
status.link = 1;
status.duplex = 1;
status.speed = 100;
fixed_phy_add(PHY_POLL, phy_id, &status);
} else {
printk(KERN_ERR "cpmac: no PHY present\n");
return -ENODEV;
}
......@@ -1060,32 +1065,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev)
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
if (phy_id == 31) {
snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, cpmac_mii.id,
phy_id);
} else {
/* Let's try to get a free fixed phy... */
for (i = 0; i < MAX_PHY_AMNT; i++) {
fixed_phy = fixed_mdio_get_phydev(i);
if (!fixed_phy)
continue;
if (!fixed_phy->phydev->attached_dev) {
strncpy(priv->phy_name,
fixed_phy->phydev->dev.bus_id,
BUS_ID_SIZE);
fixed_mdio_set_link_update(fixed_phy->phydev,
&cpmac_link_update);
goto phy_found;
}
}
if (netif_msg_drv(priv))
printk(KERN_ERR "%s: Could not find fixed PHY\n",
dev->name);
rc = -ENODEV;
goto fail;
}
snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
phy_found:
priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(priv->phy)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment