Commit 839e4a4a authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

V4L/DVB (4067): Fixed cx25840 to work with PAL/M

Sub-carrier frequency for PAL/M is slicely different than NTSC/M.
Without this patch, colors don't work on PAL/M.
Setting method also improved to allow other video standards to be included.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent c820cc45
......@@ -46,7 +46,7 @@ MODULE_LICENSE("GPL");
static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
static int cx25840_debug;
int cx25840_debug;
module_param_named(debug,cx25840_debug, int, 0644);
......@@ -251,17 +251,7 @@ static void input_change(struct i2c_client *client)
cx25840_and_or(client, 0x401, ~0x60, 0);
cx25840_and_or(client, 0x401, ~0x60, 0x60);
/* Note: perhaps V4L2_STD_PAL_M should be handled as V4L2_STD_NTSC
instead of V4L2_STD_PAL. Someone needs to test this. */
if (std & V4L2_STD_PAL) {
/* Follow tuner change procedure for PAL */
cx25840_write(client, 0x808, 0xff);
cx25840_write(client, 0x80b, 0x10);
} else if (std & V4L2_STD_SECAM) {
/* Select autodetect for SECAM */
cx25840_write(client, 0x808, 0xff);
cx25840_write(client, 0x80b, 0x10);
} else if (std & V4L2_STD_NTSC) {
if (std & V4L2_STD_525_60) {
/* Certain Hauppauge PVR150 models have a hardware bug
that causes audio to drop out. For these models the
audio standard must be set explicitly.
......@@ -280,6 +270,14 @@ static void input_change(struct i2c_client *client)
cx25840_write(client, 0x808, hw_fix ? 0x1f : 0xf6);
}
cx25840_write(client, 0x80b, 0x00);
} else if (std & V4L2_STD_PAL) {
/* Follow tuner change procedure for PAL */
cx25840_write(client, 0x808, 0xff);
cx25840_write(client, 0x80b, 0x10);
} else if (std & V4L2_STD_SECAM) {
/* Select autodetect for SECAM */
cx25840_write(client, 0x808, 0xff);
cx25840_write(client, 0x80b, 0x10);
}
if (cx25840_read(client, 0x803) & 0x10) {
......@@ -387,6 +385,8 @@ static int set_v4lstd(struct i2c_client *client, v4l2_std_id std)
}
}
v4l_dbg(1, cx25840_debug, client, "changing video std to fmt %i\n",fmt);
/* Follow step 9 of section 3.16 in the cx25840 datasheet.
Without this PAL may display a vertical ghosting effect.
This happens for example with the Yuan MPC622. */
......
......@@ -24,6 +24,8 @@
#include <linux/videodev2.h>
#include <linux/i2c.h>
extern int cx25840_debug;
/* ENABLE_PVR150_WORKAROUND activates a workaround for a hardware bug that is
present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
......
......@@ -86,61 +86,130 @@ void cx25840_vbi_setup(struct i2c_client *client)
{
struct cx25840_state *state = i2c_get_clientdata(client);
v4l2_std_id std = cx25840_get_v4lstd(client);
int hblank,hactive,burst,vblank,vactive,sc,vblank656,src_decimation;
int luma_lpf,uv_lpf, comb;
u32 pll_int,pll_frac,pll_post;
/* datasheet startup, step 8d */
if (std & ~V4L2_STD_NTSC) {
/* datasheet startup, step 8d */
cx25840_write(client, 0x49f, 0x11);
} else {
cx25840_write(client, 0x49f, 0x14);
}
cx25840_write(client, 0x470, 0x84);
cx25840_write(client, 0x471, 0x00);
cx25840_write(client, 0x472, 0x2d);
cx25840_write(client, 0x473, 0x5d);
cx25840_write(client, 0x474, 0x24);
cx25840_write(client, 0x475, 0x40);
cx25840_write(client, 0x476, 0x24);
cx25840_write(client, 0x477, 0x28);
cx25840_write(client, 0x478, 0x1f);
cx25840_write(client, 0x479, 0x02);
if (std & V4L2_STD_625_50) {
hblank=0x084;
hactive=0x2d0;
burst=0x5d;
vblank=0x024;
vactive=0x244;
vblank656=0x28;
src_decimation=0x21f;
luma_lpf=2;
if (std & V4L2_STD_SECAM) {
cx25840_write(client, 0x47a, 0x80);
cx25840_write(client, 0x47b, 0x00);
cx25840_write(client, 0x47c, 0x5f);
cx25840_write(client, 0x47d, 0x42);
uv_lpf=0;
comb=0;
sc=0x0a425f;
} else {
cx25840_write(client, 0x47a, 0x90);
cx25840_write(client, 0x47b, 0x20);
cx25840_write(client, 0x47c, 0x63);
cx25840_write(client, 0x47d, 0x82);
uv_lpf=1;
comb=0x20;
sc=0x0a8263;
}
cx25840_write(client, 0x47e, 0x0a);
cx25840_write(client, 0x47f, 0x01);
state->vbi_line_offset = 5;
} else {
/* datasheet startup, step 8d */
cx25840_write(client, 0x49f, 0x14);
hactive=720;
hblank=122;
vactive=487;
luma_lpf=1;
uv_lpf=1;
src_decimation=0x21f;
if (std == V4L2_STD_PAL_M) {
vblank=20;
vblank656=24;
burst=0x61;
comb=0x20;
sc=555452;
} else {
vblank=26;
vblank656=26;
burst=0x5b;
comb=0x66;
sc=556063;
}
}
/* DEBUG: Displays configured PLL frequency */
pll_int=cx25840_read(client, 0x108);
pll_frac=cx25840_read4(client, 0x10c)&0x1ffffff;
pll_post=cx25840_read(client, 0x109);
v4l_dbg(1, cx25840_debug, client,
"PLL regs = int: %u, frac: %u, post: %u\n",
pll_int,pll_frac,pll_post);
if (pll_post) {
int fin, fsc;
int pll= (28636363L*((((u64)pll_int)<<25L)+pll_frac)) >>25L;
pll/=pll_post;
v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n",
pll/1000000, pll%1000000);
v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n",
pll/8000000, (pll/8)%1000000);
fin=((u64)src_decimation*pll)>>12;
v4l_dbg(1, cx25840_debug, client, "ADC Sampling freq = "
"%d.%06d MHz\n",
fin/1000000,fin%1000000);
fsc= (((u64)sc)*pll) >> 24L;
v4l_dbg(1, cx25840_debug, client, "Chroma sub-carrier freq = "
"%d.%06d MHz\n",
fsc/1000000,fsc%1000000);
v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
"vblank %i , vactive %i, vblank656 %i, src_dec %i,"
"burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x,"
" sc 0x%06x\n",
hblank, hactive, vblank, vactive, vblank656,
src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
}
/* Sets horizontal blanking delay and active lines */
cx25840_write(client, 0x470, hblank);
cx25840_write(client, 0x471, 0xff&(((hblank>>8)&0x3)|(hactive <<4)));
cx25840_write(client, 0x472, hactive>>4);
/* Sets burst gate delay */
cx25840_write(client, 0x473, burst);
cx25840_write(client, 0x470, 0x7a);
cx25840_write(client, 0x471, 0x00);
cx25840_write(client, 0x472, 0x2d);
cx25840_write(client, 0x473, 0x5b);
/* Sets vertical blanking delay and active duration */
cx25840_write(client, 0x474, vblank);
cx25840_write(client, 0x475, 0xff&(((vblank>>8)&0x3)|(vactive <<4)));
cx25840_write(client, 0x476, vactive>>4);
cx25840_write(client, 0x477, vblank656);
cx25840_write(client, 0x474, 0x1a);
cx25840_write(client, 0x475, 0x70);
cx25840_write(client, 0x476, 0x1e);
cx25840_write(client, 0x477, 0x1e);
/* Sets src decimation rate */
cx25840_write(client, 0x478, 0xff&src_decimation);
cx25840_write(client, 0x479, 0xff&(src_decimation>>8));
cx25840_write(client, 0x478, 0x1f);
cx25840_write(client, 0x479, 0x02);
cx25840_write(client, 0x47a, 0x50);
cx25840_write(client, 0x47b, 0x66);
/* Sets Luma and UV Low pass filters */
cx25840_write(client, 0x47a, luma_lpf<<6|((uv_lpf<<4)&0x30));
cx25840_write(client, 0x47c, 0x1f);
cx25840_write(client, 0x47d, 0x7c);
cx25840_write(client, 0x47e, 0x08);
/* Enables comb filters */
cx25840_write(client, 0x47b, comb);
/* Sets SC Step*/
cx25840_write(client, 0x47c, sc);
cx25840_write(client, 0x47d, 0xff&sc>>8);
cx25840_write(client, 0x47e, 0xff&sc>>16);
/* Sets VBI parameters */
if (std & V4L2_STD_625_50) {
cx25840_write(client, 0x47f, 0x01);
state->vbi_line_offset = 5;
} else {
cx25840_write(client, 0x47f, 0x00);
state->vbi_line_offset = 8;
}
......@@ -186,7 +255,7 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
case VIDIOC_S_FMT:
{
int is_pal = !(cx25840_get_v4lstd(client) & V4L2_STD_NTSC);
int is_pal = !(cx25840_get_v4lstd(client) & V4L2_STD_525_60);
int vbi_offset = is_pal ? 1 : 0;
int i, x;
u8 lcr[24];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment