Merge branch 'QCA8K'

John Crispin says:

====================
net-next: dsa: add QCA8K support

This series is based on the AR8xxx series posted by Matthieu Olivari in may
2015. The following changes were made since then

* fixed the nitpicks from the previous review
* updated to latest API
* turned it into an mdio device
* added callbacks for fdb, bridge offloading, stp, eee, port status
* fixed several minor issues to the port setup and arp learning
* changed the namespacing as this driver to qca8k

The driver has so far only been tested on qca8337/N. It should work on other QCA
switches such as the qca8327 with minor changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/dsa/qca8k.txt

+* Qualcomm Atheros QCA8xxx switch family
+
+Required properties:
+
+- compatible: should be "qca,qca8337"
+- #size-cells: must be 0
+- #address-cells: must be 1
+
+Subnodes:
+
+The integrated switch subnode should be specified according to the binding
+described in dsa/dsa.txt. As the QCA8K switches do not have a N:N mapping of
+port and PHY id, each subnode describing a port needs to have a valid phandle
+referencing the internal PHY connected to it. The CPU port of this switch is
+always port 0.
+
+Example:
+
+
+	&mdio0 {
+		phy_port1: phy@0 {
+			reg = <0>;
+		};
+
+		phy_port2: phy@1 {
+			reg = <1>;
+		};
+
+		phy_port3: phy@2 {
+			reg = <2>;
+		};
+
+		phy_port4: phy@3 {
+			reg = <3>;
+		};
+
+		phy_port5: phy@4 {
+			reg = <4>;
+		};
+
+		switch0@0 {
+			compatible = "qca,qca8337";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+					phy-handle = <&phy_port1>;
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+					phy-handle = <&phy_port2>;
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+					phy-handle = <&phy_port3>;
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "lan4";
+					phy-handle = <&phy_port4>;
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "wan";
+					phy-handle = <&phy_port5>;
+				};
+			};
+		};
+	};

drivers/net/dsa/Kconfig

@@ -25,4 +25,13 @@ source "drivers/net/dsa/b53/Kconfig"
 
 source "drivers/net/dsa/mv88e6xxx/Kconfig"
 
+config NET_DSA_QCA8K
+	tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
+	depends on NET_DSA
+	select NET_DSA_TAG_QCA
+	select REGMAP
+	---help---
+	  This enables support for the Qualcomm Atheros QCA8K Ethernet
+	  switch chips.
+
 endmenu

drivers/net/dsa/Makefile

 obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
 obj-$(CONFIG_NET_DSA_BCM_SF2)	+= bcm_sf2.o
+obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
 
 obj-y				+= b53/
 obj-y				+= mv88e6xxx/

drivers/net/dsa/qca8k.h

+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCA8K_H
+#define __QCA8K_H
+
+#include <linux/delay.h>
+#include <linux/regmap.h>
+
+#define QCA8K_NUM_PORTS					7
+
+#define PHY_ID_QCA8337					0x004dd036
+#define QCA8K_ID_QCA8337				0x13
+
+#define QCA8K_NUM_FDB_RECORDS				2048
+
+#define QCA8K_CPU_PORT					0
+
+/* Global control registers */
+#define QCA8K_REG_MASK_CTRL				0x000
+#define   QCA8K_MASK_CTRL_ID_M				0xff
+#define   QCA8K_MASK_CTRL_ID_S				8
+#define QCA8K_REG_PORT0_PAD_CTRL			0x004
+#define QCA8K_REG_PORT5_PAD_CTRL			0x008
+#define QCA8K_REG_PORT6_PAD_CTRL			0x00c
+#define   QCA8K_PORT_PAD_RGMII_EN			BIT(26)
+#define   QCA8K_PORT_PAD_RGMII_TX_DELAY(x)		\
+						((0x8 + (x & 0x3)) << 22)
+#define   QCA8K_PORT_PAD_RGMII_RX_DELAY(x)		\
+						((0x10 + (x & 0x3)) << 20)
+#define   QCA8K_PORT_PAD_RGMII_RX_DELAY_EN		BIT(24)
+#define   QCA8K_PORT_PAD_SGMII_EN			BIT(7)
+#define QCA8K_REG_MODULE_EN				0x030
+#define   QCA8K_MODULE_EN_MIB				BIT(0)
+#define QCA8K_REG_MIB					0x034
+#define   QCA8K_MIB_FLUSH				BIT(24)
+#define   QCA8K_MIB_CPU_KEEP				BIT(20)
+#define   QCA8K_MIB_BUSY				BIT(17)
+#define QCA8K_GOL_MAC_ADDR0				0x60
+#define QCA8K_GOL_MAC_ADDR1				0x64
+#define QCA8K_REG_PORT_STATUS(_i)			(0x07c + (_i) * 4)
+#define   QCA8K_PORT_STATUS_SPEED			GENMASK(2, 0)
+#define   QCA8K_PORT_STATUS_SPEED_S			0
+#define   QCA8K_PORT_STATUS_TXMAC			BIT(2)
+#define   QCA8K_PORT_STATUS_RXMAC			BIT(3)
+#define   QCA8K_PORT_STATUS_TXFLOW			BIT(4)
+#define   QCA8K_PORT_STATUS_RXFLOW			BIT(5)
+#define   QCA8K_PORT_STATUS_DUPLEX			BIT(6)
+#define   QCA8K_PORT_STATUS_LINK_UP			BIT(8)
+#define   QCA8K_PORT_STATUS_LINK_AUTO			BIT(9)
+#define   QCA8K_PORT_STATUS_LINK_PAUSE			BIT(10)
+#define QCA8K_REG_PORT_HDR_CTRL(_i)			(0x9c + (_i * 4))
+#define   QCA8K_PORT_HDR_CTRL_RX_MASK			GENMASK(3, 2)
+#define   QCA8K_PORT_HDR_CTRL_RX_S			2
+#define   QCA8K_PORT_HDR_CTRL_TX_MASK			GENMASK(1, 0)
+#define   QCA8K_PORT_HDR_CTRL_TX_S			0
+#define   QCA8K_PORT_HDR_CTRL_ALL			2
+#define   QCA8K_PORT_HDR_CTRL_MGMT			1
+#define   QCA8K_PORT_HDR_CTRL_NONE			0
+
+/* EEE control registers */
+#define QCA8K_REG_EEE_CTRL				0x100
+#define  QCA8K_REG_EEE_CTRL_LPI_EN(_i)			((_i + 1) * 2)
+
+/* ACL registers */
+#define QCA8K_REG_PORT_VLAN_CTRL0(_i)			(0x420 + (_i * 8))
+#define   QCA8K_PORT_VLAN_CVID(x)			(x << 16)
+#define   QCA8K_PORT_VLAN_SVID(x)			x
+#define QCA8K_REG_PORT_VLAN_CTRL1(_i)			(0x424 + (_i * 8))
+#define QCA8K_REG_IPV4_PRI_BASE_ADDR			0x470
+#define QCA8K_REG_IPV4_PRI_ADDR_MASK			0x474
+
+/* Lookup registers */
+#define QCA8K_REG_ATU_DATA0				0x600
+#define   QCA8K_ATU_ADDR2_S				24
+#define   QCA8K_ATU_ADDR3_S				16
+#define   QCA8K_ATU_ADDR4_S				8
+#define QCA8K_REG_ATU_DATA1				0x604
+#define   QCA8K_ATU_PORT_M				0x7f
+#define   QCA8K_ATU_PORT_S				16
+#define   QCA8K_ATU_ADDR0_S				8
+#define QCA8K_REG_ATU_DATA2				0x608
+#define   QCA8K_ATU_VID_M				0xfff
+#define   QCA8K_ATU_VID_S				8
+#define   QCA8K_ATU_STATUS_M				0xf
+#define   QCA8K_ATU_STATUS_STATIC			0xf
+#define QCA8K_REG_ATU_FUNC				0x60c
+#define   QCA8K_ATU_FUNC_BUSY				BIT(31)
+#define   QCA8K_ATU_FUNC_PORT_EN			BIT(14)
+#define   QCA8K_ATU_FUNC_MULTI_EN			BIT(13)
+#define   QCA8K_ATU_FUNC_FULL				BIT(12)
+#define   QCA8K_ATU_FUNC_PORT_M				0xf
+#define   QCA8K_ATU_FUNC_PORT_S				8
+#define QCA8K_REG_GLOBAL_FW_CTRL0			0x620
+#define   QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN		BIT(10)
+#define QCA8K_REG_GLOBAL_FW_CTRL1			0x624
+#define   QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S		24
+#define   QCA8K_GLOBAL_FW_CTRL1_BC_DP_S			16
+#define   QCA8K_GLOBAL_FW_CTRL1_MC_DP_S			8
+#define   QCA8K_GLOBAL_FW_CTRL1_UC_DP_S			0
+#define QCA8K_PORT_LOOKUP_CTRL(_i)			(0x660 + (_i) * 0xc)
+#define   QCA8K_PORT_LOOKUP_MEMBER			GENMASK(6, 0)
+#define   QCA8K_PORT_LOOKUP_STATE_MASK			GENMASK(18, 16)
+#define   QCA8K_PORT_LOOKUP_STATE_DISABLED		(0 << 16)
+#define   QCA8K_PORT_LOOKUP_STATE_BLOCKING		(1 << 16)
+#define   QCA8K_PORT_LOOKUP_STATE_LISTENING		(2 << 16)
+#define   QCA8K_PORT_LOOKUP_STATE_LEARNING		(3 << 16)
+#define   QCA8K_PORT_LOOKUP_STATE_FORWARD		(4 << 16)
+#define   QCA8K_PORT_LOOKUP_STATE			GENMASK(18, 16)
+#define   QCA8K_PORT_LOOKUP_LEARN			BIT(20)
+
+/* Pkt edit registers */
+#define QCA8K_EGRESS_VLAN(x)				(0x0c70 + (4 * (x / 2)))
+
+/* L3 registers */
+#define QCA8K_HROUTER_CONTROL				0xe00
+#define   QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_M		GENMASK(17, 16)
+#define   QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_S		16
+#define   QCA8K_HROUTER_CONTROL_ARP_AGE_MODE		1
+#define QCA8K_HROUTER_PBASED_CONTROL1			0xe08
+#define QCA8K_HROUTER_PBASED_CONTROL2			0xe0c
+#define QCA8K_HNAT_CONTROL				0xe38
+
+/* MIB registers */
+#define QCA8K_PORT_MIB_COUNTER(_i)			(0x1000 + (_i) * 0x100)
+
+/* QCA specific MII registers */
+#define MII_ATH_MMD_ADDR				0x0d
+#define MII_ATH_MMD_DATA				0x0e
+
+enum {
+	QCA8K_PORT_SPEED_10M = 0,
+	QCA8K_PORT_SPEED_100M = 1,
+	QCA8K_PORT_SPEED_1000M = 2,
+	QCA8K_PORT_SPEED_ERR = 3,
+};
+
+enum qca8k_fdb_cmd {
+	QCA8K_FDB_FLUSH	= 1,
+	QCA8K_FDB_LOAD = 2,
+	QCA8K_FDB_PURGE = 3,
+	QCA8K_FDB_NEXT = 6,
+	QCA8K_FDB_SEARCH = 7,
+};
+
+struct ar8xxx_port_status {
+	struct ethtool_eee eee;
+	struct net_device *bridge_dev;
+	int enabled;
+};
+
+struct qca8k_priv {
+	struct regmap *regmap;
+	struct mii_bus *bus;
+	struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
+	struct dsa_switch *ds;
+	struct mutex reg_mutex;
+};
+
+struct qca8k_mib_desc {
+	unsigned int size;
+	unsigned int offset;
+	const char *name;
+};
+
+struct qca8k_fdb {
+	u16 vid;
+	u8 port_mask;
+	u8 aging;
+	u8 mac[6];
+};
+
+#endif /* __QCA8K_H */

include/net/dsa.h

@@ -26,6 +26,7 @@ enum dsa_tag_protocol {
 	DSA_TAG_PROTO_TRAILER,
 	DSA_TAG_PROTO_EDSA,
 	DSA_TAG_PROTO_BRCM,
+	DSA_TAG_PROTO_QCA,
 	DSA_TAG_LAST,		/* MUST BE LAST */
 };
 

net/dsa/Kconfig

@@ -38,4 +38,7 @@ config NET_DSA_TAG_EDSA
 config NET_DSA_TAG_TRAILER
 	bool
 
+config NET_DSA_TAG_QCA
+	bool
+
 endif

net/dsa/Makefile

@@ -7,3 +7,4 @@ dsa_core-$(CONFIG_NET_DSA_TAG_BRCM) += tag_brcm.o
 dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
 dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
 dsa_core-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
+dsa_core-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o

net/dsa/dsa.c

@@ -53,6 +53,9 @@ const struct dsa_device_ops *dsa_device_ops[DSA_TAG_LAST] = {
 #endif
 #ifdef CONFIG_NET_DSA_TAG_BRCM
 	[DSA_TAG_PROTO_BRCM] = &brcm_netdev_ops,
+#endif
+#ifdef CONFIG_NET_DSA_TAG_QCA
+	[DSA_TAG_PROTO_QCA] = &qca_netdev_ops,
 #endif
 	[DSA_TAG_PROTO_NONE] = &none_ops,
 };

net/dsa/dsa_priv.h

@@ -81,5 +81,7 @@ extern const struct dsa_device_ops trailer_netdev_ops;
 /* tag_brcm.c */
 extern const struct dsa_device_ops brcm_netdev_ops;
 
+/* tag_qca.c */
+extern const struct dsa_device_ops qca_netdev_ops;
 
 #endif

net/dsa/tag_qca.c

+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/etherdevice.h>
+#include "dsa_priv.h"
+
+#define QCA_HDR_LEN	2
+#define QCA_HDR_VERSION	0x2
+
+#define QCA_HDR_RECV_VERSION_MASK	GENMASK(15, 14)
+#define QCA_HDR_RECV_VERSION_S		14
+#define QCA_HDR_RECV_PRIORITY_MASK	GENMASK(13, 11)
+#define QCA_HDR_RECV_PRIORITY_S		11
+#define QCA_HDR_RECV_TYPE_MASK		GENMASK(10, 6)
+#define QCA_HDR_RECV_TYPE_S		6
+#define QCA_HDR_RECV_FRAME_IS_TAGGED	BIT(3)
+#define QCA_HDR_RECV_SOURCE_PORT_MASK	GENMASK(2, 0)
+
+#define QCA_HDR_XMIT_VERSION_MASK	GENMASK(15, 14)
+#define QCA_HDR_XMIT_VERSION_S		14
+#define QCA_HDR_XMIT_PRIORITY_MASK	GENMASK(13, 11)
+#define QCA_HDR_XMIT_PRIORITY_S		11
+#define QCA_HDR_XMIT_CONTROL_MASK	GENMASK(10, 8)
+#define QCA_HDR_XMIT_CONTROL_S		8
+#define QCA_HDR_XMIT_FROM_CPU		BIT(7)
+#define QCA_HDR_XMIT_DP_BIT_MASK	GENMASK(6, 0)
+
+static struct sk_buff *qca_tag_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	u16 *phdr, hdr;
+
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
+
+	if (skb_cow_head(skb, 0) < 0)
+		goto out_free;
+
+	skb_push(skb, QCA_HDR_LEN);
+
+	memmove(skb->data, skb->data + QCA_HDR_LEN, 2 * ETH_ALEN);
+	phdr = (u16 *)(skb->data + 2 * ETH_ALEN);
+
+	/* Set the version field, and set destination port information */
+	hdr = QCA_HDR_VERSION << QCA_HDR_XMIT_VERSION_S |
+		QCA_HDR_XMIT_FROM_CPU |
+		BIT(p->port);
+
+	*phdr = htons(hdr);
+
+	return skb;
+
+out_free:
+	kfree_skb(skb);
+	return NULL;
+}
+
+static int qca_tag_rcv(struct sk_buff *skb, struct net_device *dev,
+		       struct packet_type *pt, struct net_device *orig_dev)
+{
+	struct dsa_switch_tree *dst = dev->dsa_ptr;
+	struct dsa_switch *ds;
+	u8 ver;
+	int port;
+	__be16 *phdr, hdr;
+
+	if (unlikely(!dst))
+		goto out_drop;
+
+	skb = skb_unshare(skb, GFP_ATOMIC);
+	if (!skb)
+		goto out;
+
+	if (unlikely(!pskb_may_pull(skb, QCA_HDR_LEN)))
+		goto out_drop;
+
+	/* The QCA header is added by the switch between src addr and Ethertype
+	 * At this point, skb->data points to ethertype so header should be
+	 * right before
+	 */
+	phdr = (__be16 *)(skb->data - 2);
+	hdr = ntohs(*phdr);
+
+	/* Make sure the version is correct */
+	ver = (hdr & QCA_HDR_RECV_VERSION_MASK) >> QCA_HDR_RECV_VERSION_S;
+	if (unlikely(ver != QCA_HDR_VERSION))
+		goto out_drop;
+
+	/* Remove QCA tag and recalculate checksum */
+	skb_pull_rcsum(skb, QCA_HDR_LEN);
+	memmove(skb->data - ETH_HLEN, skb->data - ETH_HLEN - QCA_HDR_LEN,
+		ETH_HLEN - QCA_HDR_LEN);
+
+	/* This protocol doesn't support cascading multiple switches so it's
+	 * safe to assume the switch is first in the tree
+	 */
+	ds = dst->ds[0];
+	if (!ds)
+		goto out_drop;
+
+	/* Get source port information */
+	port = (hdr & QCA_HDR_RECV_SOURCE_PORT_MASK);
+	if (!ds->ports[port].netdev)
+		goto out_drop;
+
+	/* Update skb & forward the frame accordingly */
+	skb_push(skb, ETH_HLEN);
+	skb->pkt_type = PACKET_HOST;
+	skb->dev = ds->ports[port].netdev;
+	skb->protocol = eth_type_trans(skb, skb->dev);
+
+	skb->dev->stats.rx_packets++;
+	skb->dev->stats.rx_bytes += skb->len;
+
+	netif_receive_skb(skb);
+
+	return 0;
+
+out_drop:
+	kfree_skb(skb);
+out:
+	return 0;
+}
+
+const struct dsa_device_ops qca_netdev_ops = {
+	.xmit	= qca_tag_xmit,
+	.rcv	= qca_tag_rcv,
+};